| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAHCN7xL-c4rXFW3cO4c0QmnqtaRpU_HfPb46UQFzPzb2RojChw@mail.gmail.com>
Date: Tue, 25 Jan 2022 13:08:28 -0600
From: Adam Ford <aford173@...il.com>
To: Ezequiel Garcia <ezequiel@...guardiasur.com.ar>
Cc: linux-media <linux-media@...r.kernel.org>,
Adam Ford-BE <aford@...conembedded.com>,
Chris Healy <cphealy@...il.com>,
kernel test robot <lkp@...el.com>,
Philipp Zabel <p.zabel@...gutronix.de>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Lucas Stach <l.stach@...gutronix.de>,
"open list:HANTRO VPU CODEC DRIVER"
<linux-rockchip@...ts.infradead.org>,
devicetree <devicetree@...r.kernel.org>,
arm-soc <linux-arm-kernel@...ts.infradead.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
"open list:STAGING SUBSYSTEM" <linux-staging@...ts.linux.dev>
Subject: Re: [PATCH V4 07/11] arm64: dts: imx8mq: Enable both G1 and G2 VPU's
with vpu-blk-ctrl
On Tue, Jan 25, 2022 at 1:04 PM Ezequiel Garcia
<ezequiel@...guardiasur.com.ar> wrote:
>
> On Tue, Jan 25, 2022 at 11:11:24AM -0600, Adam Ford wrote:
> > With the Hantro G1 and G2 now setup to run independently, update
> > the device tree to allow both to operate. This requires the
> > vpu-blk-ctrl node to be configured. Since vpu-blk-ctrl needs
> > certain clock enabled to handle the gating of the G1 and G2
> > fuses, the clock-parents and clock-rates for the various VPU's
> > to be moved into the pgc_vpu because they cannot get re-parented
> > once enabled, and the pgc_vpu is the highest in the chain.
> >
> > Signed-off-by: Adam Ford <aford173@...il.com>
> > Reported-by: kernel test robot <lkp@...el.com>
>
> It doesn't seem correct to have the Reported-by on this commit.
I didn't put it here, because I fixed it in a whole different patch
(Patch 1/11). This patch remains unchanged. I probably should have
put in the other patch, but I didn't think it was essential. Sorry
about that. Do I need to resend to just add the r-b tag?
adam
>
> Thanks,
> Ezequiel
>
> > Reviewed-by: Ezequiel Garcia <ezequiel@...guardiasur.com.ar>
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > index 2df2510d0118..549b2440f55d 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > @@ -737,7 +737,21 @@ pgc_gpu: power-domain@5 {
> > pgc_vpu: power-domain@6 {
> > #power-domain-cells = <0>;
> > reg = <IMX8M_POWER_DOMAIN_VPU>;
> > - clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
> > + clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>,
> > + <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
> > + <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
> > + assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>,
> > + <&clk IMX8MQ_CLK_VPU_G2>,
> > + <&clk IMX8MQ_CLK_VPU_BUS>,
> > + <&clk IMX8MQ_VPU_PLL_BYPASS>;
> > + assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>,
> > + <&clk IMX8MQ_VPU_PLL_OUT>,
> > + <&clk IMX8MQ_SYS1_PLL_800M>,
> > + <&clk IMX8MQ_VPU_PLL>;
> > + assigned-clock-rates = <600000000>,
> > + <600000000>,
> > + <800000000>,
> > + <0>;
> > };
> >
> > pgc_disp: power-domain@7 {
> > @@ -1457,30 +1471,31 @@ usb3_phy1: usb-phy@...f0040 {
> > status = "disabled";
> > };
> >
> > - vpu: video-codec@...00000 {
> > - compatible = "nxp,imx8mq-vpu";
> > - reg = <0x38300000 0x10000>,
> > - <0x38310000 0x10000>,
> > - <0x38320000 0x10000>;
> > - reg-names = "g1", "g2", "ctrl";
> > - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
> > - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> > - interrupt-names = "g1", "g2";
> > + vpu_g1: video-codec@...00000 {
> > + compatible = "nxp,imx8mq-vpu-g1";
> > + reg = <0x38300000 0x10000>;
> > + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>;
> > + power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G1>;
> > + };
> > +
> > + vpu_g2: video-codec@...10000 {
> > + compatible = "nxp,imx8mq-vpu-g2";
> > + reg = <0x38310000 0x10000>;
> > + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
> > + power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G2>;
> > + };
> > +
> > + vpu_blk_ctrl: blk-ctrl@...20000 {
> > + compatible = "fsl,imx8mq-vpu-blk-ctrl";
> > + reg = <0x38320000 0x100>;
> > + power-domains = <&pgc_vpu>, <&pgc_vpu>, <&pgc_vpu>;
> > + power-domain-names = "bus", "g1", "g2";
> > clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
> > - <&clk IMX8MQ_CLK_VPU_G2_ROOT>,
> > - <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
> > - clock-names = "g1", "g2", "bus";
> > - assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>,
> > - <&clk IMX8MQ_CLK_VPU_G2>,
> > - <&clk IMX8MQ_CLK_VPU_BUS>,
> > - <&clk IMX8MQ_VPU_PLL_BYPASS>;
> > - assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>,
> > - <&clk IMX8MQ_VPU_PLL_OUT>,
> > - <&clk IMX8MQ_SYS1_PLL_800M>,
> > - <&clk IMX8MQ_VPU_PLL>;
> > - assigned-clock-rates = <600000000>, <600000000>,
> > - <800000000>, <0>;
> > - power-domains = <&pgc_vpu>;
> > + <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
> > + clock-names = "g1", "g2";
> > + #power-domain-cells = <1>;
> > };
> >
> > pcie0: pcie@...00000 {
> > --
> > 2.32.0
> >
Powered by blists - more mailing lists