| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220125194222.12783-3-f.fainelli@gmail.com>
Date: Tue, 25 Jan 2022 11:42:17 -0800
From: Florian Fainelli <f.fainelli@...il.com>
To: stable@...r.kernel.org
Cc: Stefan Wahren <stefan.wahren@...e.com>,
Nicolas Saenz Julienne <nsaenzjulienne@...e.de>,
Linus Walleij <linus.walleij@...aro.org>,
Florian Fainelli <f.fainelli@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Ray Jui <rjui@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
bcm-kernel-feedback-list@...adcom.com (maintainer:BROADCOM
BCM281XX/BCM11XXX/BCM216XX ARM ARCHITE...),
Eric Anholt <eric@...olt.net>,
Stefan Wahren <wahrenst@....net>,
Nicolas Saenz Julienne <nsaenz@...nel.org>,
Phil Elwell <phil@...pberrypi.com>,
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
DEVICE TREE BINDINGS), linux-kernel@...r.kernel.org (open list),
linux-gpio@...r.kernel.org (open list:PIN CONTROL SUBSYSTEM),
linux-rpi-kernel@...ts.infradead.org (moderated list:BROADCOM
BCM2711/BCM2835 ARM ARCHITECTURE),
linux-arm-kernel@...ts.infradead.org (moderated list:BROADCOM
BCM2711/BCM2835 ARM ARCHITECTURE)
Subject: [PATCH stable 5.4 2/7] pinctrl: bcm2835: Refactor platform data
From: Stefan Wahren <stefan.wahren@...e.com>
commit 90bfaf028d61a6d523c685b63c2bcc94eebb8057 upstream
This prepares the platform data to be easier to extend for more GPIOs.
Except of this there is no functional change.
Signed-off-by: Stefan Wahren <stefan.wahren@...e.com>
Link: https://lore.kernel.org/r/1581166975-22949-3-git-send-email-stefan.wahren@i2se.com
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
drivers/pinctrl/bcm/pinctrl-bcm2835.c | 57 +++++++++++++++++++++------
1 file changed, 44 insertions(+), 13 deletions(-)
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
index 3fc26389a573..7f0a9c647927 100644
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -82,6 +82,7 @@ struct bcm2835_pinctrl {
struct pinctrl_dev *pctl_dev;
struct gpio_chip gpio_chip;
+ struct pinctrl_desc pctl_desc;
struct pinctrl_gpio_range gpio_range;
raw_spinlock_t irq_lock[BCM2835_NUM_BANKS];
@@ -1051,7 +1052,7 @@ static const struct pinconf_ops bcm2711_pinconf_ops = {
.pin_config_set = bcm2711_pinconf_set,
};
-static struct pinctrl_desc bcm2835_pinctrl_desc = {
+static const struct pinctrl_desc bcm2835_pinctrl_desc = {
.name = MODULE_NAME,
.pins = bcm2835_gpio_pins,
.npins = ARRAY_SIZE(bcm2835_gpio_pins),
@@ -1061,19 +1062,47 @@ static struct pinctrl_desc bcm2835_pinctrl_desc = {
.owner = THIS_MODULE,
};
-static struct pinctrl_gpio_range bcm2835_pinctrl_gpio_range = {
+static const struct pinctrl_desc bcm2711_pinctrl_desc = {
+ .name = MODULE_NAME,
+ .pins = bcm2835_gpio_pins,
+ .npins = ARRAY_SIZE(bcm2835_gpio_pins),
+ .pctlops = &bcm2835_pctl_ops,
+ .pmxops = &bcm2835_pmx_ops,
+ .confops = &bcm2711_pinconf_ops,
+ .owner = THIS_MODULE,
+};
+
+static const struct pinctrl_gpio_range bcm2835_pinctrl_gpio_range = {
.name = MODULE_NAME,
.npins = BCM2835_NUM_GPIOS,
};
+struct bcm_plat_data {
+ const struct gpio_chip *gpio_chip;
+ const struct pinctrl_desc *pctl_desc;
+ const struct pinctrl_gpio_range *gpio_range;
+};
+
+static const struct bcm_plat_data bcm2835_plat_data = {
+ .gpio_chip = &bcm2835_gpio_chip,
+ .pctl_desc = &bcm2835_pinctrl_desc,
+ .gpio_range = &bcm2835_pinctrl_gpio_range,
+};
+
+static const struct bcm_plat_data bcm2711_plat_data = {
+ .gpio_chip = &bcm2835_gpio_chip,
+ .pctl_desc = &bcm2711_pinctrl_desc,
+ .gpio_range = &bcm2835_pinctrl_gpio_range,
+};
+
static const struct of_device_id bcm2835_pinctrl_match[] = {
{
.compatible = "brcm,bcm2835-gpio",
- .data = &bcm2835_pinconf_ops,
+ .data = &bcm2835_plat_data,
},
{
.compatible = "brcm,bcm2711-gpio",
- .data = &bcm2711_pinconf_ops,
+ .data = &bcm2711_plat_data,
},
{}
};
@@ -1082,6 +1111,7 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
+ const struct bcm_plat_data *pdata;
struct bcm2835_pinctrl *pc;
struct gpio_irq_chip *girq;
struct resource iomem;
@@ -1108,7 +1138,13 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev)
if (IS_ERR(pc->base))
return PTR_ERR(pc->base);
- pc->gpio_chip = bcm2835_gpio_chip;
+ match = of_match_node(bcm2835_pinctrl_match, pdev->dev.of_node);
+ if (!match)
+ return -EINVAL;
+
+ pdata = match->data;
+
+ pc->gpio_chip = *pdata->gpio_chip;
pc->gpio_chip.parent = dev;
pc->gpio_chip.of_node = np;
@@ -1159,19 +1195,14 @@ static int bcm2835_pinctrl_probe(struct platform_device *pdev)
return err;
}
- match = of_match_node(bcm2835_pinctrl_match, pdev->dev.of_node);
- if (match) {
- bcm2835_pinctrl_desc.confops =
- (const struct pinconf_ops *)match->data;
- }
-
- pc->pctl_dev = devm_pinctrl_register(dev, &bcm2835_pinctrl_desc, pc);
+ pc->pctl_desc = *pdata->pctl_desc;
+ pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc);
if (IS_ERR(pc->pctl_dev)) {
gpiochip_remove(&pc->gpio_chip);
return PTR_ERR(pc->pctl_dev);
}
- pc->gpio_range = bcm2835_pinctrl_gpio_range;
+ pc->gpio_range = *pdata->gpio_range;
pc->gpio_range.base = pc->gpio_chip.base;
pc->gpio_range.gc = &pc->gpio_chip;
pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range);
--
2.25.1
Powered by blists - more mailing lists