[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220125011104.2480133-14-iwona.winiarska@intel.com>
Date: Tue, 25 Jan 2022 02:11:04 +0100
From: Iwona Winiarska <iwona.winiarska@...el.com>
To: linux-kernel@...r.kernel.org, openbmc@...ts.ozlabs.org,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: devicetree@...r.kernel.org, linux-aspeed@...ts.ozlabs.org,
linux-arm-kernel@...ts.infradead.org, linux-hwmon@...r.kernel.org,
linux-doc@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...id.au>,
Jean Delvare <jdelvare@...e.com>,
Guenter Roeck <linux@...ck-us.net>,
Arnd Bergmann <arnd@...db.de>, Olof Johansson <olof@...om.net>,
Jonathan Corbet <corbet@....net>,
Borislav Petkov <bp@...en8.de>,
Pierre-Louis Bossart <pierre-louis.bossart@...ux.intel.com>,
Tony Luck <tony.luck@...el.com>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Dan Williams <dan.j.williams@...el.com>,
Randy Dunlap <rdunlap@...radead.org>,
Zev Weiss <zweiss@...inix.com>,
David Muller <d.mueller@...oft.ch>,
Dave Hansen <dave.hansen@...el.com>,
Billy Tsai <billy_tsai@...eedtech.com>,
Iwona Winiarska <iwona.winiarska@...el.com>
Subject: [PATCH v6 13/13] docs: Add PECI documentation
Add a brief overview of PECI and PECI wire interface.
The documentation also contains kernel-doc for PECI subsystem internals
and PECI CPU Driver API.
Signed-off-by: Iwona Winiarska <iwona.winiarska@...el.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@...ux.intel.com>
---
Documentation/index.rst | 1 +
Documentation/peci/index.rst | 16 +++++++++++
Documentation/peci/peci.rst | 51 ++++++++++++++++++++++++++++++++++++
MAINTAINERS | 1 +
4 files changed, 69 insertions(+)
create mode 100644 Documentation/peci/index.rst
create mode 100644 Documentation/peci/peci.rst
diff --git a/Documentation/index.rst b/Documentation/index.rst
index 2b4de3926858..deaa7f669fcd 100644
--- a/Documentation/index.rst
+++ b/Documentation/index.rst
@@ -138,6 +138,7 @@ needed).
scheduler/index
mhi/index
tty/index
+ peci/index
Architecture-agnostic documentation
-----------------------------------
diff --git a/Documentation/peci/index.rst b/Documentation/peci/index.rst
new file mode 100644
index 000000000000..989de10416e7
--- /dev/null
+++ b/Documentation/peci/index.rst
@@ -0,0 +1,16 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+====================
+Linux PECI Subsystem
+====================
+
+.. toctree::
+
+ peci
+
+.. only:: subproject and html
+
+ Indices
+ =======
+
+ * :ref:`genindex`
diff --git a/Documentation/peci/peci.rst b/Documentation/peci/peci.rst
new file mode 100644
index 000000000000..331b1ec00e22
--- /dev/null
+++ b/Documentation/peci/peci.rst
@@ -0,0 +1,51 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+========
+Overview
+========
+
+The Platform Environment Control Interface (PECI) is a communication
+interface between Intel processor and management controllers
+(e.g. Baseboard Management Controller, BMC).
+PECI provides services that allow the management controller to
+configure, monitor and debug platform by accessing various registers.
+It defines a dedicated command protocol, where the management
+controller is acting as a PECI originator and the processor - as
+a PECI responder.
+PECI can be used in both single processor and multiple-processor based
+systems.
+
+NOTE:
+Intel PECI specification is not released as a dedicated document,
+instead it is a part of External Design Specification (EDS) for given
+Intel CPU. External Design Specifications are usually not publicly
+available.
+
+PECI Wire
+---------
+
+PECI Wire interface uses a single wire for self-clocking and data
+transfer. It does not require any additional control lines - the
+physical layer is a self-clocked one-wire bus signal that begins each
+bit with a driven, rising edge from an idle near zero volts. The
+duration of the signal driven high allows to determine whether the bit
+value is logic '0' or logic '1'. PECI Wire also includes variable data
+rate established with every message.
+
+For PECI Wire, each processor package will utilize unique, fixed
+addresses within a defined range and that address should
+have a fixed relationship with the processor socket ID - if one of the
+processors is removed, it does not affect addresses of remaining
+processors.
+
+PECI subsystem internals
+------------------------
+
+.. kernel-doc:: include/linux/peci.h
+.. kernel-doc:: drivers/peci/internal.h
+.. kernel-doc:: drivers/peci/core.c
+.. kernel-doc:: drivers/peci/request.c
+
+PECI CPU Driver API
+-------------------
+.. kernel-doc:: drivers/peci/cpu.c
diff --git a/MAINTAINERS b/MAINTAINERS
index d821aeaaa2d3..06449cc42a10 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15112,6 +15112,7 @@ M: Iwona Winiarska <iwona.winiarska@...el.com>
L: openbmc@...ts.ozlabs.org (moderated for non-subscribers)
S: Supported
F: Documentation/devicetree/bindings/peci/
+F: Documentation/peci/
F: drivers/peci/
F: include/linux/peci-cpu.h
F: include/linux/peci.h
--
2.31.1
Powered by blists - more mailing lists