linux-kernel - Re: [RESEND, third time][PATCH] arm64: dts: intel: socfpga_agilex_socdk: align LED node names with dtschema

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <2cb2bbd9-1ff7-2a5e-a425-29a502080290@kernel.org>
Date:   Wed, 26 Jan 2022 14:26:29 -0600
From:   Dinh Nguyen <dinguyen@...nel.org>
To:     Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>,
        Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Cc:     Krzysztof Kozlowski <krzk@...nel.org>
Subject: Re: [RESEND, third time][PATCH] arm64: dts: intel:
 socfpga_agilex_socdk: align LED node names with dtschema



On 1/26/22 11:41, Krzysztof Kozlowski wrote:
> From: Krzysztof Kozlowski <krzk@...nel.org>
> 
> Align the LED node names with dtschema to silence dtbs_check warnings
> like:
> 
>      leds: 'hps0', 'hps1', 'hps2' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
> ---
>   arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts | 6 +++---
>   1 file changed, 3 insertions(+), 3 deletions(-)
> 
> ---
> 
> This patch waits for a year. Dinh, you previously acked it but can you
> apply it?
> diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
> index ea37ba7ccff9..26cd3c121757 100644
> --- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
> +++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
> @@ -21,17 +21,17 @@ chosen {
>   
>   	leds {
>   		compatible = "gpio-leds";
> -		hps0 {
> +		led0 {
>   			label = "hps_led0";
>   			gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
>   		};
>   
> -		hps1 {
> +		led1 {
>   			label = "hps_led1";
>   			gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
>   		};
>   
> -		hps2 {
> +		led2 {
>   			label = "hps_led2";
>   			gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
>   		};


Apologies for missing this the first 2 times.

Applied, thanks!

Dinh