| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <YfE+euszbG5Ghck3@kroah.com>
Date: Wed, 26 Jan 2022 13:28:42 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: Sean Anderson <sean.anderson@...o.com>
Cc: linux-usb@...r.kernel.org,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] usb: ulpi: Add debugfs support
On Mon, Jan 24, 2022 at 11:28:26AM -0500, Sean Anderson wrote:
>
>
> On 1/23/22 6:27 AM, Greg Kroah-Hartman wrote:
> > On Fri, Jan 14, 2022 at 11:39:47AM -0500, Sean Anderson wrote:
> >> This adds a debugfs file for ULPI devices which contains a dump of their
> >> registers. This is useful for debugging basic connectivity problems. The
> >> file is created in ulpi_register because many devices will never have a
> >> driver bound (as they are managed in hardware by the USB controller
> >> device).
> >>
> >> Signed-off-by: Sean Anderson <sean.anderson@...o.com>
> >> ---
> >>
> >> drivers/usb/common/ulpi.c | 100 ++++++++++++++++++++++++++++++++++--
> >> include/linux/ulpi/driver.h | 3 ++
> >> 2 files changed, 99 insertions(+), 4 deletions(-)
> >>
> >> diff --git a/drivers/usb/common/ulpi.c b/drivers/usb/common/ulpi.c
> >> index 4169cf40a03b..a39c48e04013 100644
> >> --- a/drivers/usb/common/ulpi.c
> >> +++ b/drivers/usb/common/ulpi.c
> >> @@ -13,6 +13,7 @@
> >> #include <linux/module.h>
> >> #include <linux/slab.h>
> >> #include <linux/acpi.h>
> >> +#include <linux/debugfs.h>
> >> #include <linux/of.h>
> >> #include <linux/of_device.h>
> >> #include <linux/clk/clk-conf.h>
> >> @@ -228,9 +229,64 @@ static int ulpi_read_id(struct ulpi *ulpi)
> >> return 0;
> >> }
> >>
> >> +static int __maybe_unused ulpi_regs_read(struct seq_file *seq, void *data)
> >> +{
> >> + struct ulpi *ulpi = seq->private;
> >> +
> >> +#define ulpi_print(name, reg) do { \
> >> + int ret = ulpi_read(ulpi, reg); \
> >> + if (ret < 0) \
> >> + return ret; \
> >> + seq_printf(seq, name " %.02x\n", ret); \
> >> +} while (0)
> >> +
> >> + ulpi_print("Vendor ID Low ", ULPI_VENDOR_ID_LOW);
> >> + ulpi_print("Vendor ID High ", ULPI_VENDOR_ID_HIGH);
> >> + ulpi_print("Product ID Low ", ULPI_PRODUCT_ID_LOW);
> >> + ulpi_print("Product ID High ", ULPI_PRODUCT_ID_HIGH);
> >> + ulpi_print("Function Control ", ULPI_FUNC_CTRL);
> >> + ulpi_print("Interface Control ", ULPI_IFC_CTRL);
> >> + ulpi_print("OTG Control ", ULPI_OTG_CTRL);
> >> + ulpi_print("USB Interrupt Enable Rising ", ULPI_USB_INT_EN_RISE);
> >> + ulpi_print("USB Interrupt Enable Falling", ULPI_USB_INT_EN_FALL);
> >> + ulpi_print("USB Interrupt Status ", ULPI_USB_INT_STS);
> >> + ulpi_print("USB Interrupt Latch ", ULPI_USB_INT_LATCH);
> >> + ulpi_print("Debug ", ULPI_DEBUG);
> >> + ulpi_print("Scratch Register ", ULPI_SCRATCH);
> >> + ulpi_print("Carkit Control ", ULPI_CARKIT_CTRL);
> >> + ulpi_print("Carkit Interrupt Delay ", ULPI_CARKIT_INT_DELAY);
> >> + ulpi_print("Carkit Interrupt Enable ", ULPI_CARKIT_INT_EN);
> >> + ulpi_print("Carkit Interrupt Status ", ULPI_CARKIT_INT_STS);
> >> + ulpi_print("Carkit Interrupt Latch ", ULPI_CARKIT_INT_LATCH);
> >> + ulpi_print("Carkit Pulse Control ", ULPI_CARKIT_PLS_CTRL);
> >> + ulpi_print("Transmit Positive Width ", ULPI_TX_POS_WIDTH);
> >> + ulpi_print("Transmit Negative Width ", ULPI_TX_NEG_WIDTH);
> >> + ulpi_print("Receive Polarity Recovery ", ULPI_POLARITY_RECOVERY);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int __maybe_unused ulpi_regs_open(struct inode *inode, struct file *f)
> >> +{
> >> + struct ulpi *ulpi = inode->i_private;
> >> +
> >> + return single_open(f, ulpi_regs_read, ulpi);
> >> +}
> >> +
> >> +static const struct file_operations __maybe_unused ulpi_regs_ops = {
> >> + .owner = THIS_MODULE,
> >> + .open = ulpi_regs_open,
> >> + .release = single_release,
> >> + .read = seq_read,
> >> + .llseek = seq_lseek
> >> +};
> >> +
> >> +static struct dentry *ulpi_root = (void *)-EPROBE_DEFER;
> >
> > There is no need for this variable, nor is there ever a need to set this
> > to an error value like this. If you need to find the root, just look it
> > up!
>
> The reason why it is set to a non-zero value is so that it doesn't get
> coalesced with other zero-initialized static variables.
That doesn't matter, you shouldn't need to initialize this.
> >> +
> >> static int ulpi_register(struct device *dev, struct ulpi *ulpi)
> >> {
> >> int ret;
> >> + struct dentry *regs;
> >>
> >> ulpi->dev.parent = dev; /* needed early for ops */
> >> ulpi->dev.bus = &ulpi_bus;
> >> @@ -245,16 +301,39 @@ static int ulpi_register(struct device *dev, struct ulpi *ulpi)
> >>
> >> ret = ulpi_read_id(ulpi);
> >> if (ret)
> >> - return ret;
> >> + goto err_of;
> >>
> >> ret = device_register(&ulpi->dev);
> >> if (ret)
> >> - return ret;
> >> + goto err_of;
> >> +
> >> + if (IS_ENABLED(CONFIG_DEBUG_FS)) {
> >
> > This check is not needed, the compiler will handle it all for your
> > automatically.
> >
> >> + ulpi->root = debugfs_create_dir(dev_name(dev), ulpi_root);
> >> + if (IS_ERR(ulpi->root)) {
> >
> > No need to check this, just keep moving on. debugfs return values
> > shoudl NEVER be checked as your code should not care what happens.
>
> OK. The reason we have the above check is so we don't fail here because
> if we don't have CONFIG_DEBUG_FS then debugfs_create_dir() will fail
> with -ENODEV.
That's fine, there is no need to check a debugfs call, and any result
returned by a debugfs call can be passed to another debugfs call with no
problems.
thanks,
greg k-h
Powered by blists - more mailing lists