lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Thu, 27 Jan 2022 15:29:55 +0100
From:   Swapnil Jakhade <sjakhade@...ence.com>
To:     <vkoul@...nel.org>, <kishon@...com>,
        <linux-phy@...ts.infradead.org>, <linux-kernel@...r.kernel.org>
CC:     <mparab@...ence.com>, <sjakhade@...ence.com>,
        <a-govindraju@...com>, <r-ravikumar@...com>
Subject: [PATCH 1/4] phy: cadence-torrent: Add function to get PLL to be configured for DP

Torrent PHY PLL0 or PLL1 is used for DP depending on the single link or
multilink protocol configuration for which PHY is configured. In multilink
configurations with other protocols, either PLL0 or PLL1 will be used
for DP. For single link DP, both PLLs need to be configured at POR.

Signed-off-by: Swapnil Jakhade <sjakhade@...ence.com>
---
 drivers/phy/cadence/phy-cadence-torrent.c | 30 +++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/drivers/phy/cadence/phy-cadence-torrent.c b/drivers/phy/cadence/phy-cadence-torrent.c
index 7c4b8050485f..0e2839a6c65d 100644
--- a/drivers/phy/cadence/phy-cadence-torrent.c
+++ b/drivers/phy/cadence/phy-cadence-torrent.c
@@ -38,6 +38,9 @@
 #define POLL_TIMEOUT_US		5000
 #define PLL_LOCK_TIMEOUT	100000
 
+#define DP_PLL0			BIT(0)
+#define DP_PLL1			BIT(1)
+
 #define TORRENT_COMMON_CDB_OFFSET	0x0
 
 #define TORRENT_TX_LANE_CDB_OFFSET(ln, block_offset, reg_offset)	\
@@ -323,6 +326,7 @@ struct cdns_torrent_phy {
 	void __iomem *base;	/* DPTX registers base */
 	void __iomem *sd_base; /* SD0801 registers base */
 	u32 max_bit_rate; /* Maximum link bit rate to use (in Mbps) */
+	u32 dp_pll;
 	struct reset_control *phy_rst;
 	struct reset_control *apb_rst;
 	struct device *dev;
@@ -978,6 +982,30 @@ void cdns_torrent_dp_pma_cmn_vco_cfg_100mhz(struct cdns_torrent_phy *cdns_phy,
 	}
 }
 
+/* Set PLL used for DP configuration */
+static int cdns_torrent_dp_get_pll(struct cdns_torrent_phy *cdns_phy,
+				   enum cdns_torrent_phy_type phy_t2)
+{
+	switch (phy_t2) {
+	case TYPE_PCIE:
+	case TYPE_USB:
+		cdns_phy->dp_pll = DP_PLL1;
+		break;
+	case TYPE_SGMII:
+	case TYPE_QSGMII:
+		cdns_phy->dp_pll = DP_PLL0;
+		break;
+	case TYPE_NONE:
+		cdns_phy->dp_pll = DP_PLL0 | DP_PLL1;
+		break;
+	default:
+		dev_err(cdns_phy->dev, "Unsupported PHY configuration\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 /*
  * Enable or disable PLL for selected lanes.
  */
@@ -1640,6 +1668,8 @@ static int cdns_torrent_dp_init(struct phy *phy)
 		return -EINVAL;
 	}
 
+	cdns_torrent_dp_get_pll(cdns_phy, TYPE_NONE);
+
 	cdns_torrent_dp_common_init(cdns_phy, inst);
 
 	return cdns_torrent_dp_start(cdns_phy, inst, phy);
-- 
2.34.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ