| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ebd76be7c06fd3f8f888094fb2dd8e138fe97b33.camel@HansenPartnership.com>
Date: Fri, 28 Jan 2022 12:14:52 -0500
From: James Bottomley <James.Bottomley@...senPartnership.com>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-scsi <linux-scsi@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>
Subject: [GIT PULL] SCSI fixes for 5.17-rc1
Sixteen patches, mostly minor fixes and updates; however there are
substantive driver bug fixes in pm8001, bnx2fc, zfcp, myrs and qedf.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes
The short changelog is:
Christophe JAILLET (3):
scsi: bfa: Remove useless DMA-32 fallback configuration
scsi: hisi_sas: Remove useless DMA-32 fallback configuration
scsi: 3w-sas: Remove useless DMA-32 fallback configuration
Colin Ian King (1):
scsi: 53c700: Remove redundant assignment to pointer SCp
John Garry (1):
scsi: pm8001: Fix bogus FW crash for maxcpus=1
John Meneghini (1):
scsi: bnx2fc: Flush destroy_work queue before calling bnx2fc_interface_put()
Kiwoong Kim (2):
scsi: ufs: Treat link loss as fatal error
scsi: ufs: Use generic error code in ufshcd_set_dev_pwr_mode()
Saurav Kashyap (3):
scsi: qedf: Change context reset messages to ratelimited
scsi: qedf: Fix refcount issue when LOGO is received during TMF
scsi: qedf: Add stag_work to all the vports
Steffen Maier (1):
scsi: zfcp: Fix failed recovery on gone remote port with non-NPIV FCP devices
Tong Zhang (1):
scsi: myrs: Fix crash in error case
Xiaoke Wang (1):
scsi: ufs: ufshcd-pltfrm: Check the return value of devm_kstrdup()
Yang Yingliang (1):
scsi: elx: efct: Don't use GFP_KERNEL under spin lock
ZouMingzhe (1):
scsi: target: iscsi: Make sure the np under each tpg is unique
And the diffstat:
drivers/s390/scsi/zfcp_fc.c | 13 ++++++++++++-
drivers/scsi/3w-sas.c | 4 ----
drivers/scsi/53c700.c | 1 -
drivers/scsi/bfa/bfad.c | 6 ------
drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 20 +++++---------------
drivers/scsi/elx/libefc/efc_els.c | 8 ++------
drivers/scsi/hisi_sas/hisi_sas_main.c | 3 ---
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 2 --
drivers/scsi/myrs.c | 3 ++-
drivers/scsi/pm8001/pm80xx_hwi.c | 16 ++++++++++++++--
drivers/scsi/pm8001/pm80xx_hwi.h | 6 +++++-
drivers/scsi/qedf/qedf_io.c | 1 +
drivers/scsi/qedf/qedf_main.c | 7 +++++--
drivers/scsi/ufs/ufshcd-pltfrm.c | 7 +++++++
drivers/scsi/ufs/ufshcd.c | 9 ++++++---
drivers/scsi/ufs/ufshci.h | 3 ++-
drivers/target/iscsi/iscsi_target_tpg.c | 3 +++
17 files changed, 64 insertions(+), 48 deletions(-)
With full diff below.
James
---
diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index d24cafe02708..511bf8e0a436 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -521,6 +521,8 @@ static void zfcp_fc_adisc_handler(void *data)
goto out;
}
+ /* re-init to undo drop from zfcp_fc_adisc() */
+ port->d_id = ntoh24(adisc_resp->adisc_port_id);
/* port is good, unblock rport without going through erp */
zfcp_scsi_schedule_rport_register(port);
out:
@@ -534,6 +536,7 @@ static int zfcp_fc_adisc(struct zfcp_port *port)
struct zfcp_fc_req *fc_req;
struct zfcp_adapter *adapter = port->adapter;
struct Scsi_Host *shost = adapter->scsi_host;
+ u32 d_id;
int ret;
fc_req = kmem_cache_zalloc(zfcp_fc_req_cache, GFP_ATOMIC);
@@ -558,7 +561,15 @@ static int zfcp_fc_adisc(struct zfcp_port *port)
fc_req->u.adisc.req.adisc_cmd = ELS_ADISC;
hton24(fc_req->u.adisc.req.adisc_port_id, fc_host_port_id(shost));
- ret = zfcp_fsf_send_els(adapter, port->d_id, &fc_req->ct_els,
+ d_id = port->d_id; /* remember as destination for send els below */
+ /*
+ * Force fresh GID_PN lookup on next port recovery.
+ * Must happen after request setup and before sending request,
+ * to prevent race with port->d_id re-init in zfcp_fc_adisc_handler().
+ */
+ port->d_id = 0;
+
+ ret = zfcp_fsf_send_els(adapter, d_id, &fc_req->ct_els,
ZFCP_FC_CTELS_TMO);
if (ret)
kmem_cache_free(zfcp_fc_req_cache, fc_req);
diff --git a/drivers/scsi/3w-sas.c b/drivers/scsi/3w-sas.c
index b9482da79512..3ebe66151dcb 100644
--- a/drivers/scsi/3w-sas.c
+++ b/drivers/scsi/3w-sas.c
@@ -1567,8 +1567,6 @@ static int twl_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)
pci_try_set_mwi(pdev);
retval = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
- if (retval)
- retval = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
if (retval) {
TW_PRINTK(host, TW_DRIVER, 0x18, "Failed to set dma mask");
retval = -ENODEV;
@@ -1786,8 +1784,6 @@ static int __maybe_unused twl_resume(struct device *dev)
pci_try_set_mwi(pdev);
retval = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
- if (retval)
- retval = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
if (retval) {
TW_PRINTK(host, TW_DRIVER, 0x25, "Failed to set dma mask during resume");
retval = -ENODEV;
diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index 3ad3ebaca8e9..ad4972c0fc53 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -1507,7 +1507,6 @@ NCR_700_intr(int irq, void *dev_id)
struct scsi_cmnd *SCp = hostdata->cmd;
handled = 1;
- SCp = hostdata->cmd;
if(istat & SCSI_INT_PENDING) {
udelay(10);
diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c
index 440ef32be048..e5aa982ffedc 100644
--- a/drivers/scsi/bfa/bfad.c
+++ b/drivers/scsi/bfa/bfad.c
@@ -732,9 +732,6 @@ bfad_pci_init(struct pci_dev *pdev, struct bfad_s *bfad)
pci_set_master(pdev);
rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
- if (rc)
- rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
-
if (rc) {
rc = -ENODEV;
printk(KERN_ERR "dma_set_mask_and_coherent fail %p\n", pdev);
@@ -1559,9 +1556,6 @@ bfad_pci_slot_reset(struct pci_dev *pdev)
pci_set_master(pdev);
rc = dma_set_mask_and_coherent(&bfad->pcidev->dev, DMA_BIT_MASK(64));
- if (rc)
- rc = dma_set_mask_and_coherent(&bfad->pcidev->dev,
- DMA_BIT_MASK(32));
if (rc)
goto out_disable_device;
diff --git a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
index 71fa62bd3083..9be273c320e2 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_fcoe.c
@@ -82,7 +82,7 @@ static int bnx2fc_bind_pcidev(struct bnx2fc_hba *hba);
static void bnx2fc_unbind_pcidev(struct bnx2fc_hba *hba);
static struct fc_lport *bnx2fc_if_create(struct bnx2fc_interface *interface,
struct device *parent, int npiv);
-static void bnx2fc_destroy_work(struct work_struct *work);
+static void bnx2fc_port_destroy(struct fcoe_port *port);
static struct bnx2fc_hba *bnx2fc_hba_lookup(struct net_device *phys_dev);
static struct bnx2fc_interface *bnx2fc_interface_lookup(struct net_device
@@ -907,9 +907,6 @@ static void bnx2fc_indicate_netevent(void *context, unsigned long event,
__bnx2fc_destroy(interface);
}
mutex_unlock(&bnx2fc_dev_lock);
-
- /* Ensure ALL destroy work has been completed before return */
- flush_workqueue(bnx2fc_wq);
return;
default:
@@ -1215,8 +1212,8 @@ static int bnx2fc_vport_destroy(struct fc_vport *vport)
mutex_unlock(&n_port->lp_mutex);
bnx2fc_free_vport(interface->hba, port->lport);
bnx2fc_port_shutdown(port->lport);
+ bnx2fc_port_destroy(port);
bnx2fc_interface_put(interface);
- queue_work(bnx2fc_wq, &port->destroy_work);
return 0;
}
@@ -1525,7 +1522,6 @@ static struct fc_lport *bnx2fc_if_create(struct bnx2fc_interface *interface,
port->lport = lport;
port->priv = interface;
port->get_netdev = bnx2fc_netdev;
- INIT_WORK(&port->destroy_work, bnx2fc_destroy_work);
/* Configure fcoe_port */
rc = bnx2fc_lport_config(lport);
@@ -1653,8 +1649,8 @@ static void __bnx2fc_destroy(struct bnx2fc_interface *interface)
bnx2fc_interface_cleanup(interface);
bnx2fc_stop(interface);
list_del(&interface->list);
+ bnx2fc_port_destroy(port);
bnx2fc_interface_put(interface);
- queue_work(bnx2fc_wq, &port->destroy_work);
}
/**
@@ -1694,15 +1690,12 @@ static int bnx2fc_destroy(struct net_device *netdev)
return rc;
}
-static void bnx2fc_destroy_work(struct work_struct *work)
+static void bnx2fc_port_destroy(struct fcoe_port *port)
{
- struct fcoe_port *port;
struct fc_lport *lport;
- port = container_of(work, struct fcoe_port, destroy_work);
lport = port->lport;
-
- BNX2FC_HBA_DBG(lport, "Entered bnx2fc_destroy_work\n");
+ BNX2FC_HBA_DBG(lport, "Entered %s, destroying lport %p\n", __func__, lport);
bnx2fc_if_destroy(lport);
}
@@ -2556,9 +2549,6 @@ static void bnx2fc_ulp_exit(struct cnic_dev *dev)
__bnx2fc_destroy(interface);
mutex_unlock(&bnx2fc_dev_lock);
- /* Ensure ALL destroy work has been completed before return */
- flush_workqueue(bnx2fc_wq);
-
bnx2fc_ulp_stop(hba);
/* unregister cnic device */
if (test_and_clear_bit(BNX2FC_CNIC_REGISTERED, &hba->reg_with_cnic))
diff --git a/drivers/scsi/elx/libefc/efc_els.c b/drivers/scsi/elx/libefc/efc_els.c
index 7bb4f9aad2c8..84bc81d7ce76 100644
--- a/drivers/scsi/elx/libefc/efc_els.c
+++ b/drivers/scsi/elx/libefc/efc_els.c
@@ -46,18 +46,14 @@ efc_els_io_alloc_size(struct efc_node *node, u32 reqlen, u32 rsplen)
efc = node->efc;
- spin_lock_irqsave(&node->els_ios_lock, flags);
-
if (!node->els_io_enabled) {
efc_log_err(efc, "els io alloc disabled\n");
- spin_unlock_irqrestore(&node->els_ios_lock, flags);
return NULL;
}
els = mempool_alloc(efc->els_io_pool, GFP_ATOMIC);
if (!els) {
atomic_add_return(1, &efc->els_io_alloc_failed_count);
- spin_unlock_irqrestore(&node->els_ios_lock, flags);
return NULL;
}
@@ -74,7 +70,6 @@ efc_els_io_alloc_size(struct efc_node *node, u32 reqlen, u32 rsplen)
&els->io.req.phys, GFP_KERNEL);
if (!els->io.req.virt) {
mempool_free(els, efc->els_io_pool);
- spin_unlock_irqrestore(&node->els_ios_lock, flags);
return NULL;
}
@@ -94,10 +89,11 @@ efc_els_io_alloc_size(struct efc_node *node, u32 reqlen, u32 rsplen)
/* add els structure to ELS IO list */
INIT_LIST_HEAD(&els->list_entry);
+ spin_lock_irqsave(&node->els_ios_lock, flags);
list_add_tail(&els->list_entry, &node->els_ios_list);
+ spin_unlock_irqrestore(&node->els_ios_lock, flags);
}
- spin_unlock_irqrestore(&node->els_ios_lock, flags);
return els;
}
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index a05ec7aece5a..2f53a2ee024a 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -2666,9 +2666,6 @@ static struct Scsi_Host *hisi_sas_shost_alloc(struct platform_device *pdev,
goto err_out;
error = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
- if (error)
- error = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
-
if (error) {
dev_err(dev, "No usable DMA addressing method\n");
goto err_out;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index a45ef9a5e12e..a01a3a7b706b 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -4695,8 +4695,6 @@ hisi_sas_v3_probe(struct pci_dev *pdev, const struct pci_device_id *id)
goto err_out;
rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
- if (rc)
- rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
if (rc) {
dev_err(dev, "No usable DMA addressing method\n");
rc = -ENODEV;
diff --git a/drivers/scsi/myrs.c b/drivers/scsi/myrs.c
index 253ceca54a84..7eb8c39da366 100644
--- a/drivers/scsi/myrs.c
+++ b/drivers/scsi/myrs.c
@@ -2267,7 +2267,8 @@ static void myrs_cleanup(struct myrs_hba *cs)
myrs_unmap(cs);
if (cs->mmio_base) {
- cs->disable_intr(cs);
+ if (cs->disable_intr)
+ cs->disable_intr(cs);
iounmap(cs->mmio_base);
cs->mmio_base = NULL;
}
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index bbf538fe15b3..2530d1365556 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -4151,10 +4151,22 @@ static int process_oq(struct pm8001_hba_info *pm8001_ha, u8 vec)
u32 ret = MPI_IO_STATUS_FAIL;
u32 regval;
+ /*
+ * Fatal errors are programmed to be signalled in irq vector
+ * pm8001_ha->max_q_num - 1 through pm8001_ha->main_cfg_tbl.pm80xx_tbl.
+ * fatal_err_interrupt
+ */
if (vec == (pm8001_ha->max_q_num - 1)) {
+ u32 mipsall_ready;
+
+ if (pm8001_ha->chip_id == chip_8008 ||
+ pm8001_ha->chip_id == chip_8009)
+ mipsall_ready = SCRATCH_PAD_MIPSALL_READY_8PORT;
+ else
+ mipsall_ready = SCRATCH_PAD_MIPSALL_READY_16PORT;
+
regval = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
- if ((regval & SCRATCH_PAD_MIPSALL_READY) !=
- SCRATCH_PAD_MIPSALL_READY) {
+ if ((regval & mipsall_ready) != mipsall_ready) {
pm8001_ha->controller_fatal_error = true;
pm8001_dbg(pm8001_ha, FAIL,
"Firmware Fatal error! Regval:0x%x\n",
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h
index c7e5d93bea92..c41ed039c92a 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.h
+++ b/drivers/scsi/pm8001/pm80xx_hwi.h
@@ -1405,8 +1405,12 @@ typedef struct SASProtocolTimerConfig SASProtocolTimerConfig_t;
#define SCRATCH_PAD_BOOT_LOAD_SUCCESS 0x0
#define SCRATCH_PAD_IOP0_READY 0xC00
#define SCRATCH_PAD_IOP1_READY 0x3000
-#define SCRATCH_PAD_MIPSALL_READY (SCRATCH_PAD_IOP1_READY | \
+#define SCRATCH_PAD_MIPSALL_READY_16PORT (SCRATCH_PAD_IOP1_READY | \
SCRATCH_PAD_IOP0_READY | \
+ SCRATCH_PAD_ILA_READY | \
+ SCRATCH_PAD_RAAE_READY)
+#define SCRATCH_PAD_MIPSALL_READY_8PORT (SCRATCH_PAD_IOP0_READY | \
+ SCRATCH_PAD_ILA_READY | \
SCRATCH_PAD_RAAE_READY)
/* boot loader state */
diff --git a/drivers/scsi/qedf/qedf_io.c b/drivers/scsi/qedf/qedf_io.c
index 99a56ca1fb16..fab43dabe5b3 100644
--- a/drivers/scsi/qedf/qedf_io.c
+++ b/drivers/scsi/qedf/qedf_io.c
@@ -2250,6 +2250,7 @@ int qedf_initiate_cleanup(struct qedf_ioreq *io_req,
io_req->tm_flags == FCP_TMF_TGT_RESET) {
clear_bit(QEDF_CMD_OUTSTANDING, &io_req->flags);
io_req->sc_cmd = NULL;
+ kref_put(&io_req->refcount, qedf_release_cmd);
complete(&io_req->tm_done);
}
diff --git a/drivers/scsi/qedf/qedf_main.c b/drivers/scsi/qedf/qedf_main.c
index cdc66e2a9488..6ad28bc8e948 100644
--- a/drivers/scsi/qedf/qedf_main.c
+++ b/drivers/scsi/qedf/qedf_main.c
@@ -911,7 +911,7 @@ void qedf_ctx_soft_reset(struct fc_lport *lport)
struct qed_link_output if_link;
if (lport->vport) {
- QEDF_ERR(NULL, "Cannot issue host reset on NPIV port.\n");
+ printk_ratelimited("Cannot issue host reset on NPIV port.\n");
return;
}
@@ -1864,6 +1864,7 @@ static int qedf_vport_create(struct fc_vport *vport, bool disabled)
vport_qedf->cmd_mgr = base_qedf->cmd_mgr;
init_completion(&vport_qedf->flogi_compl);
INIT_LIST_HEAD(&vport_qedf->fcports);
+ INIT_DELAYED_WORK(&vport_qedf->stag_work, qedf_stag_change_work);
rc = qedf_vport_libfc_config(vport, vn_port);
if (rc) {
@@ -3980,7 +3981,9 @@ void qedf_stag_change_work(struct work_struct *work)
struct qedf_ctx *qedf =
container_of(work, struct qedf_ctx, stag_work.work);
- QEDF_ERR(&qedf->dbg_ctx, "Performing software context reset.\n");
+ printk_ratelimited("[%s]:[%s:%d]:%d: Performing software context reset.",
+ dev_name(&qedf->pdev->dev), __func__, __LINE__,
+ qedf->dbg_ctx.host_no);
qedf_ctx_soft_reset(qedf->lport);
}
diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
index 8b16bbbcb806..87975d1a21c8 100644
--- a/drivers/scsi/ufs/ufshcd-pltfrm.c
+++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
@@ -92,6 +92,11 @@ static int ufshcd_parse_clock_info(struct ufs_hba *hba)
clki->min_freq = clkfreq[i];
clki->max_freq = clkfreq[i+1];
clki->name = devm_kstrdup(dev, name, GFP_KERNEL);
+ if (!clki->name) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
if (!strcmp(name, "ref_clk"))
clki->keep_link_active = true;
dev_dbg(dev, "%s: min %u max %u name %s\n", "freq-table-hz",
@@ -127,6 +132,8 @@ static int ufshcd_populate_vreg(struct device *dev, const char *name,
return -ENOMEM;
vreg->name = devm_kstrdup(dev, name, GFP_KERNEL);
+ if (!vreg->name)
+ return -ENOMEM;
snprintf(prop_name, MAX_PROP_SIZE, "%s-max-microamp", name);
if (of_property_read_u32(np, prop_name, &vreg->max_uA)) {
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 460d2b440d2e..50b12d60dc1b 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -8613,7 +8613,7 @@ static void ufshcd_hba_exit(struct ufs_hba *hba)
* @pwr_mode: device power mode to set
*
* Returns 0 if requested power mode is set successfully
- * Returns non-zero if failed to set the requested power mode
+ * Returns < 0 if failed to set the requested power mode
*/
static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba,
enum ufs_dev_pwr_mode pwr_mode)
@@ -8667,8 +8667,11 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba,
sdev_printk(KERN_WARNING, sdp,
"START_STOP failed for power mode: %d, result %x\n",
pwr_mode, ret);
- if (ret > 0 && scsi_sense_valid(&sshdr))
- scsi_print_sense_hdr(sdp, NULL, &sshdr);
+ if (ret > 0) {
+ if (scsi_sense_valid(&sshdr))
+ scsi_print_sense_hdr(sdp, NULL, &sshdr);
+ ret = -EIO;
+ }
}
if (!ret)
diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h
index 6a295c88d850..a7ff0e5b5494 100644
--- a/drivers/scsi/ufs/ufshci.h
+++ b/drivers/scsi/ufs/ufshci.h
@@ -142,7 +142,8 @@ static inline u32 ufshci_version(u32 major, u32 minor)
#define INT_FATAL_ERRORS (DEVICE_FATAL_ERROR |\
CONTROLLER_FATAL_ERROR |\
SYSTEM_BUS_FATAL_ERROR |\
- CRYPTO_ENGINE_FATAL_ERROR)
+ CRYPTO_ENGINE_FATAL_ERROR |\
+ UIC_LINK_LOST)
/* HCS - Host Controller Status 30h */
#define DEVICE_PRESENT 0x1
diff --git a/drivers/target/iscsi/iscsi_target_tpg.c b/drivers/target/iscsi/iscsi_target_tpg.c
index 8075f60fd02c..2d5cf1714ae0 100644
--- a/drivers/target/iscsi/iscsi_target_tpg.c
+++ b/drivers/target/iscsi/iscsi_target_tpg.c
@@ -443,6 +443,9 @@ static bool iscsit_tpg_check_network_portal(
break;
}
spin_unlock(&tpg->tpg_np_lock);
+
+ if (match)
+ break;
}
spin_unlock(&tiqn->tiqn_tpg_lock);
Powered by blists - more mailing lists