linux-kernel - [PATCH v2 4/4] arm64: dts: mediatek: mt8195: enable usb remote wakeup

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220128062902.26273-4-chunfeng.yun@mediatek.com>
Date:   Fri, 28 Jan 2022 14:29:02 +0800
From:   Chunfeng Yun <chunfeng.yun@...iatek.com>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Matthias Brugger <matthias.bgg@...il.com>
CC:     Chunfeng Yun <chunfeng.yun@...iatek.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mathias Nyman <mathias.nyman@...el.com>,
        <linux-usb@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-mediatek@...ts.infradead.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>,
        Tianping Fang <tianping.fang@...iatek.com>,
        Eddie Hung <eddie.hung@...iatek.com>
Subject: [PATCH v2 4/4] arm64: dts: mediatek: mt8195: enable usb remote wakeup

Enable USB remote wakeup of all four xHCI controllers

Signed-off-by: Chunfeng Yun <chunfeng.yun@...iatek.com>
---
v2: based on new mt8195 base dts, no need add usb nodes

Note:

 depend on the reviewing patch:

[v9,3/3] arm64: dts: Add mediatek SoC mt8195 and evaluation board
https://patchwork.kernel.org/patch/12711296

---
 arch/arm64/boot/dts/mediatek/mt8195.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 240a21708806..444e5448c9b1 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -573,6 +573,8 @@
 				 <&apmixedsys CLK_APMIXED_USB1PLL>,
 				 <&infracfg_ao CLK_INFRA_AO_SSUSB_XHCI>;
 			clock-names = "sys_ck", "ref_ck", "mcu_ck", "xhci_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 103>;
+			wakeup-source;
 			status = "disabled";
 		};
 
@@ -636,6 +638,8 @@
 				 <&apmixedsys CLK_APMIXED_USB1PLL>,
 				 <&pericfg_ao CLK_PERI_AO_SSUSB_1P_XHCI>;
 			clock-names = "sys_ck", "ref_ck", "mcu_ck","xhci_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 104>;
+			wakeup-source;
 			status = "disabled";
 		};
 
@@ -655,6 +659,8 @@
 				 <&topckgen CLK_TOP_SSUSB_P2_REF>,
 				 <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>;
 			clock-names = "sys_ck", "ref_ck", "xhci_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 105>;
+			wakeup-source;
 			status = "disabled";
 		};
 
@@ -674,6 +680,8 @@
 				 <&topckgen CLK_TOP_SSUSB_P3_REF>,
 				 <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>;
 			clock-names = "sys_ck", "ref_ck", "xhci_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 106>;
+			wakeup-source;
 			/* This controller is connected with a BT device.
 			 * Disable usb2 lpm to prevent konwn issues.
 			 */
-- 
2.18.0