| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 31 Jan 2022 18:50:44 +0000
From: Vladimir Oltean <vladimir.oltean@....com>
To: Colin Foster <colin.foster@...advantage.com>
CC: "linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-gpio@...r.kernel.org" <linux-gpio@...r.kernel.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Steen Hegelund <Steen.Hegelund@...rochip.com>,
Lars Povlsen <lars.povlsen@...rochip.com>,
Linus Walleij <linus.walleij@...aro.org>,
Russell King <linux@...linux.org.uk>,
Heiner Kallweit <hkallweit1@...il.com>,
Jakub Kicinski <kuba@...nel.org>,
"David S. Miller" <davem@...emloft.net>,
Florian Fainelli <f.fainelli@...il.com>,
Vivien Didelot <vivien.didelot@...il.com>,
Andrew Lunn <andrew@...n.ch>,
"UNGLinuxDriver@...rochip.com" <UNGLinuxDriver@...rochip.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Claudiu Manoil <claudiu.manoil@....com>,
Lee Jones <lee.jones@...aro.org>,
"katie.morris@...advantage.com" <katie.morris@...advantage.com>
Subject: Re: [RFC v6 net-next 9/9] net: dsa: ocelot: add external ocelot
switch control
On Sat, Jan 29, 2022 at 02:02:21PM -0800, Colin Foster wrote:
> Add control of an external VSC7512 chip by way of the ocelot-mfd interface.
>
> Currently the four copper phy ports are fully functional. Communication to
> external phys is also functional, but the SGMII / QSGMII interfaces are
> currently non-functional.
>
> Signed-off-by: Colin Foster <colin.foster@...advantage.com>
> ---
> drivers/mfd/ocelot-core.c | 4 +
> drivers/net/dsa/ocelot/Kconfig | 14 +
> drivers/net/dsa/ocelot/Makefile | 5 +
> drivers/net/dsa/ocelot/ocelot_ext.c | 681 ++++++++++++++++++++++++++++
> include/soc/mscc/ocelot.h | 2 +
> 5 files changed, 706 insertions(+)
> create mode 100644 drivers/net/dsa/ocelot/ocelot_ext.c
>
> diff --git a/drivers/mfd/ocelot-core.c b/drivers/mfd/ocelot-core.c
> index 590489481b8c..17a77d618e92 100644
> --- a/drivers/mfd/ocelot-core.c
> +++ b/drivers/mfd/ocelot-core.c
> @@ -122,6 +122,10 @@ static const struct mfd_cell vsc7512_devs[] = {
> .num_resources = ARRAY_SIZE(vsc7512_miim1_resources),
> .resources = vsc7512_miim1_resources,
> },
> + {
> + .name = "ocelot-ext-switch",
> + .of_compatible = "mscc,vsc7512-ext-switch",
> + },
> };
>
> int ocelot_core_init(struct ocelot_core *core)
> diff --git a/drivers/net/dsa/ocelot/Kconfig b/drivers/net/dsa/ocelot/Kconfig
> index 220b0b027b55..f40b2c7171ad 100644
> --- a/drivers/net/dsa/ocelot/Kconfig
> +++ b/drivers/net/dsa/ocelot/Kconfig
> @@ -1,4 +1,18 @@
> # SPDX-License-Identifier: GPL-2.0-only
> +config NET_DSA_MSCC_OCELOT_EXT
> + tristate "Ocelot External Ethernet switch support"
> + depends on NET_DSA && SPI
> + depends on NET_VENDOR_MICROSEMI
> + select MDIO_MSCC_MIIM
> + select MFD_OCELOT_CORE
> + select MSCC_OCELOT_SWITCH_LIB
> + select NET_DSA_TAG_OCELOT_8021Q
> + select NET_DSA_TAG_OCELOT
> + help
> + This driver supports the VSC7511, VSC7512, VSC7513 and VSC7514 chips
> + when controlled through SPI. It can be used with the Microsemi dev
> + boards and an external CPU or custom hardware.
> +
> config NET_DSA_MSCC_FELIX
> tristate "Ocelot / Felix Ethernet switch support"
> depends on NET_DSA && PCI
> diff --git a/drivers/net/dsa/ocelot/Makefile b/drivers/net/dsa/ocelot/Makefile
> index f6dd131e7491..d7f3f5a4461c 100644
> --- a/drivers/net/dsa/ocelot/Makefile
> +++ b/drivers/net/dsa/ocelot/Makefile
> @@ -1,11 +1,16 @@
> # SPDX-License-Identifier: GPL-2.0-only
> obj-$(CONFIG_NET_DSA_MSCC_FELIX) += mscc_felix.o
> +obj-$(CONFIG_NET_DSA_MSCC_OCELOT_EXT) += mscc_ocelot_ext.o
> obj-$(CONFIG_NET_DSA_MSCC_SEVILLE) += mscc_seville.o
>
> mscc_felix-objs := \
> felix.o \
> felix_vsc9959.o
>
> +mscc_ocelot_ext-objs := \
> + felix.o \
> + ocelot_ext.o
> +
> mscc_seville-objs := \
> felix.o \
> seville_vsc9953.o
> diff --git a/drivers/net/dsa/ocelot/ocelot_ext.c b/drivers/net/dsa/ocelot/ocelot_ext.c
> new file mode 100644
> index 000000000000..6fdff016673e
> --- /dev/null
> +++ b/drivers/net/dsa/ocelot/ocelot_ext.c
How about ocelot_vsc7512.c for a name?
> @@ -0,0 +1,681 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright 2021 Innovative Advantage Inc.
> + */
> +
> +#include <asm/byteorder.h>
> +#include <linux/iopoll.h>
> +#include <linux/kconfig.h>
> +#include <linux/mdio/mdio-mscc-miim.h>
> +#include <linux/of_mdio.h>
> +#include <linux/phylink.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <soc/mscc/ocelot_ana.h>
> +#include <soc/mscc/ocelot_dev.h>
> +#include <soc/mscc/ocelot_qsys.h>
> +#include <soc/mscc/ocelot_vcap.h>
> +#include <soc/mscc/ocelot_ptp.h>
> +#include <soc/mscc/ocelot_sys.h>
> +#include <soc/mscc/ocelot.h>
> +#include <soc/mscc/vsc7514_regs.h>
> +#include "felix.h"
> +
> +#define VSC7512_NUM_PORTS 11
> +
> +#define OCELOT_SPI_PORT_MODE_INTERNAL (1 << 0)
> +#define OCELOT_SPI_PORT_MODE_SGMII (1 << 1)
> +#define OCELOT_SPI_PORT_MODE_QSGMII (1 << 2)
> +
> +const u32 vsc7512_port_modes[VSC7512_NUM_PORTS] = {
missing "static"?
> + OCELOT_SPI_PORT_MODE_INTERNAL,
Why is "_SPI_" in the name?
> + OCELOT_SPI_PORT_MODE_INTERNAL,
> + OCELOT_SPI_PORT_MODE_INTERNAL,
> + OCELOT_SPI_PORT_MODE_INTERNAL,
> + OCELOT_SPI_PORT_MODE_SGMII | OCELOT_SPI_PORT_MODE_QSGMII,
> + OCELOT_SPI_PORT_MODE_SGMII | OCELOT_SPI_PORT_MODE_QSGMII,
> + OCELOT_SPI_PORT_MODE_SGMII | OCELOT_SPI_PORT_MODE_QSGMII,
> + OCELOT_SPI_PORT_MODE_SGMII | OCELOT_SPI_PORT_MODE_QSGMII,
> + OCELOT_SPI_PORT_MODE_SGMII | OCELOT_SPI_PORT_MODE_QSGMII,
> + OCELOT_SPI_PORT_MODE_SGMII,
> + OCELOT_SPI_PORT_MODE_SGMII | OCELOT_SPI_PORT_MODE_QSGMII,
> +};
> +
> +struct ocelot_ext_data {
> + struct felix felix;
> + const u32 *port_modes;
> +};
I don't mind at all if you extend/generalize the pre-validation to all
Felix drivers and put "port_modes" inside struct felix_info.
felix_vsc9959.c would be:
#define VSC9959_PORT_MODE_SERDES (OCELOT_PORT_MODE_SGMII | \
OCELOT_PORT_MODE_QSGMII | \
OCELOT_PORT_MODE_2500BASEX | \
OCELOT_PORT_MODE_USXGMII)
static const u32 vsc9959_port_modes[] = {
VSC9959_PORT_MODE_SERDES,
VSC9959_PORT_MODE_SERDES,
VSC9959_PORT_MODE_SERDES,
VSC9959_PORT_MODE_SERDES,
OCELOT_PORT_MODE_INTERNAL,
OCELOT_PORT_MODE_INTERNAL,
};
seville_vsc9953.c would be:
#define VSC9953_PORT_MODE_SERDES (OCELOT_PORT_MODE_SGMII | \
OCELOT_PORT_MODE_QSGMII)
static const u32 vsc9959_port_modes[] = {
VSC9953_PORT_MODE_SERDES,
VSC9953_PORT_MODE_SERDES,
VSC9953_PORT_MODE_SERDES,
VSC9953_PORT_MODE_SERDES,
VSC9953_PORT_MODE_SERDES,
VSC9953_PORT_MODE_SERDES,
VSC9953_PORT_MODE_SERDES,
VSC9953_PORT_MODE_SERDES,
OCELOT_PORT_MODE_INTERNAL,
OCELOT_PORT_MODE_INTERNAL,
};
and no more felix_info :: prevalidate_phy_mode function pointer.
> +
> +static const u32 vsc7512_gcb_regmap[] = {
> + REG(GCB_SOFT_RST, 0x0008),
> + REG(GCB_MIIM_MII_STATUS, 0x009c),
> + REG(GCB_PHY_PHY_CFG, 0x00f0),
> + REG(GCB_PHY_PHY_STAT, 0x00f4),
> +};
> +
> +static const u32 *vsc7512_regmap[TARGET_MAX] = {
> + [ANA] = vsc7514_ana_regmap,
> + [QS] = vsc7514_qs_regmap,
> + [QSYS] = vsc7514_qsys_regmap,
> + [REW] = vsc7514_rew_regmap,
> + [SYS] = vsc7514_sys_regmap,
> + [S0] = vsc7514_vcap_regmap,
> + [S1] = vsc7514_vcap_regmap,
> + [S2] = vsc7514_vcap_regmap,
> + [PTP] = vsc7514_ptp_regmap,
> + [GCB] = vsc7512_gcb_regmap,
> + [DEV_GMII] = vsc7514_dev_gmii_regmap,
> +};
> +
> +#define VSC7512_BYTE_ORDER_LE 0x00000000
> +#define VSC7512_BYTE_ORDER_BE 0x81818181
> +#define VSC7512_BIT_ORDER_MSB 0x00000000
> +#define VSC7512_BIT_ORDER_LSB 0x42424242
Unused.
> +
> +static struct ocelot_ext_data *felix_to_ocelot_ext(struct felix *felix)
> +{
> + return container_of(felix, struct ocelot_ext_data, felix);
> +}
> +
> +static struct ocelot_ext_data *ocelot_to_ocelot_ext(struct ocelot *ocelot)
> +{
> + struct felix *felix = ocelot_to_felix(ocelot);
> +
> + return felix_to_ocelot_ext(felix);
> +}
I wouldn't mind a "ds_to_felix()" helper, but as mentioned, it would be
good if you could use struct felix instead of introducing yet one more
container.
> +
> +static void ocelot_ext_reset_phys(struct ocelot *ocelot)
> +{
> + ocelot_write(ocelot, 0, GCB_PHY_PHY_CFG);
> + ocelot_write(ocelot, 0x1ff, GCB_PHY_PHY_CFG);
> + mdelay(500);
> +}
> +
> +static int ocelot_ext_reset(struct ocelot *ocelot)
> +{
> + struct felix *felix = ocelot_to_felix(ocelot);
> + struct device *dev = ocelot->dev;
> + struct device_node *mdio_node;
> + int retries = 100;
> + int err, val;
> +
> + ocelot_ext_reset_phys(ocelot);
> +
> + mdio_node = of_get_child_by_name(dev->of_node, "mdio");
* Return: A node pointer if found, with refcount incremented, use
* of_node_put() on it when done.
There's no "of_node_put()" below.
> + if (!mdio_node)
> + dev_info(ocelot->dev,
> + "mdio children not found in device tree\n");
> +
> + err = of_mdiobus_register(felix->imdio, mdio_node);
> + if (err) {
> + dev_err(ocelot->dev, "error registering MDIO bus\n");
> + return err;
> + }
> +
> + felix->ds->slave_mii_bus = felix->imdio;
A bit surprised to see MDIO bus registration in ocelot_ops :: reset and
not in felix_info :: mdio_bus_alloc.
> +
> + /* We might need to reset the switch core here, if that is possible */
> + err = regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_INIT], 1);
> + if (err)
of_mdiobus_register() needs mdiobus_unregister() on error.
> + return err;
> +
> + err = regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_ENA], 1);
> + if (err)
> + return err;
> +
> + do {
> + msleep(1);
> + regmap_field_read(ocelot->regfields[SYS_RESET_CFG_MEM_INIT],
> + &val);
> + } while (val && --retries);
> +
> + if (!retries)
> + return -ETIMEDOUT;
> +
> + err = regmap_field_write(ocelot->regfields[SYS_RESET_CFG_CORE_ENA], 1);
> +
> + return err;
"err = ...; return err" can be turned into "return ..." if it weren't
for error handling. But you need to handle errors.
> +}
> +
> +static u32 ocelot_offset_from_reg_base(struct ocelot *ocelot, u32 target,
> + u32 reg)
> +{
> + return ocelot->map[target][reg & REG_MASK];
> +}
> +
> +static const struct ocelot_ops vsc7512_ops = {
> + .reset = ocelot_ext_reset,
> + .wm_enc = ocelot_wm_enc,
> + .wm_dec = ocelot_wm_dec,
> + .wm_stat = ocelot_wm_stat,
> + .port_to_netdev = felix_port_to_netdev,
> + .netdev_to_port = felix_netdev_to_port,
> +};
> +
> +static const struct resource vsc7512_target_io_res[TARGET_MAX] = {
> + [ANA] = {
> + .start = 0x71880000,
> + .end = 0x7188ffff,
> + .name = "ana",
> + },
> + [QS] = {
> + .start = 0x71080000,
> + .end = 0x710800ff,
> + .name = "qs",
> + },
> + [QSYS] = {
> + .start = 0x71800000,
> + .end = 0x719fffff,
> + .name = "qsys",
> + },
> + [REW] = {
> + .start = 0x71030000,
> + .end = 0x7103ffff,
> + .name = "rew",
> + },
> + [SYS] = {
> + .start = 0x71010000,
> + .end = 0x7101ffff,
> + .name = "sys",
> + },
> + [S0] = {
> + .start = 0x71040000,
> + .end = 0x710403ff,
> + .name = "s0",
> + },
> + [S1] = {
> + .start = 0x71050000,
> + .end = 0x710503ff,
> + .name = "s1",
> + },
> + [S2] = {
> + .start = 0x71060000,
> + .end = 0x710603ff,
> + .name = "s2",
> + },
> + [GCB] = {
> + .start = 0x71070000,
> + .end = 0x7107022b,
> + .name = "devcpu_gcb",
> + },
> +};
> +
> +static const struct resource vsc7512_port_io_res[] = {
> + {
> + .start = 0x711e0000,
> + .end = 0x711effff,
> + .name = "port0",
> + },
> + {
> + .start = 0x711f0000,
> + .end = 0x711fffff,
> + .name = "port1",
> + },
> + {
> + .start = 0x71200000,
> + .end = 0x7120ffff,
> + .name = "port2",
> + },
> + {
> + .start = 0x71210000,
> + .end = 0x7121ffff,
> + .name = "port3",
> + },
> + {
> + .start = 0x71220000,
> + .end = 0x7122ffff,
> + .name = "port4",
> + },
> + {
> + .start = 0x71230000,
> + .end = 0x7123ffff,
> + .name = "port5",
> + },
> + {
> + .start = 0x71240000,
> + .end = 0x7124ffff,
> + .name = "port6",
> + },
> + {
> + .start = 0x71250000,
> + .end = 0x7125ffff,
> + .name = "port7",
> + },
> + {
> + .start = 0x71260000,
> + .end = 0x7126ffff,
> + .name = "port8",
> + },
> + {
> + .start = 0x71270000,
> + .end = 0x7127ffff,
> + .name = "port9",
> + },
> + {
> + .start = 0x71280000,
> + .end = 0x7128ffff,
> + .name = "port10",
> + },
> +};
> +
> +static const struct reg_field vsc7512_regfields[REGFIELD_MAX] = {
> + [ANA_ADVLEARN_VLAN_CHK] = REG_FIELD(ANA_ADVLEARN, 11, 11),
> + [ANA_ADVLEARN_LEARN_MIRROR] = REG_FIELD(ANA_ADVLEARN, 0, 10),
> + [ANA_ANEVENTS_MSTI_DROP] = REG_FIELD(ANA_ANEVENTS, 27, 27),
> + [ANA_ANEVENTS_ACLKILL] = REG_FIELD(ANA_ANEVENTS, 26, 26),
> + [ANA_ANEVENTS_ACLUSED] = REG_FIELD(ANA_ANEVENTS, 25, 25),
> + [ANA_ANEVENTS_AUTOAGE] = REG_FIELD(ANA_ANEVENTS, 24, 24),
> + [ANA_ANEVENTS_VS2TTL1] = REG_FIELD(ANA_ANEVENTS, 23, 23),
> + [ANA_ANEVENTS_STORM_DROP] = REG_FIELD(ANA_ANEVENTS, 22, 22),
> + [ANA_ANEVENTS_LEARN_DROP] = REG_FIELD(ANA_ANEVENTS, 21, 21),
> + [ANA_ANEVENTS_AGED_ENTRY] = REG_FIELD(ANA_ANEVENTS, 20, 20),
> + [ANA_ANEVENTS_CPU_LEARN_FAILED] = REG_FIELD(ANA_ANEVENTS, 19, 19),
> + [ANA_ANEVENTS_AUTO_LEARN_FAILED] = REG_FIELD(ANA_ANEVENTS, 18, 18),
> + [ANA_ANEVENTS_LEARN_REMOVE] = REG_FIELD(ANA_ANEVENTS, 17, 17),
> + [ANA_ANEVENTS_AUTO_LEARNED] = REG_FIELD(ANA_ANEVENTS, 16, 16),
> + [ANA_ANEVENTS_AUTO_MOVED] = REG_FIELD(ANA_ANEVENTS, 15, 15),
> + [ANA_ANEVENTS_DROPPED] = REG_FIELD(ANA_ANEVENTS, 14, 14),
> + [ANA_ANEVENTS_CLASSIFIED_DROP] = REG_FIELD(ANA_ANEVENTS, 13, 13),
> + [ANA_ANEVENTS_CLASSIFIED_COPY] = REG_FIELD(ANA_ANEVENTS, 12, 12),
> + [ANA_ANEVENTS_VLAN_DISCARD] = REG_FIELD(ANA_ANEVENTS, 11, 11),
> + [ANA_ANEVENTS_FWD_DISCARD] = REG_FIELD(ANA_ANEVENTS, 10, 10),
> + [ANA_ANEVENTS_MULTICAST_FLOOD] = REG_FIELD(ANA_ANEVENTS, 9, 9),
> + [ANA_ANEVENTS_UNICAST_FLOOD] = REG_FIELD(ANA_ANEVENTS, 8, 8),
> + [ANA_ANEVENTS_DEST_KNOWN] = REG_FIELD(ANA_ANEVENTS, 7, 7),
> + [ANA_ANEVENTS_BUCKET3_MATCH] = REG_FIELD(ANA_ANEVENTS, 6, 6),
> + [ANA_ANEVENTS_BUCKET2_MATCH] = REG_FIELD(ANA_ANEVENTS, 5, 5),
> + [ANA_ANEVENTS_BUCKET1_MATCH] = REG_FIELD(ANA_ANEVENTS, 4, 4),
> + [ANA_ANEVENTS_BUCKET0_MATCH] = REG_FIELD(ANA_ANEVENTS, 3, 3),
> + [ANA_ANEVENTS_CPU_OPERATION] = REG_FIELD(ANA_ANEVENTS, 2, 2),
> + [ANA_ANEVENTS_DMAC_LOOKUP] = REG_FIELD(ANA_ANEVENTS, 1, 1),
> + [ANA_ANEVENTS_SMAC_LOOKUP] = REG_FIELD(ANA_ANEVENTS, 0, 0),
> + [ANA_TABLES_MACACCESS_B_DOM] = REG_FIELD(ANA_TABLES_MACACCESS, 18, 18),
> + [ANA_TABLES_MACTINDX_BUCKET] = REG_FIELD(ANA_TABLES_MACTINDX, 10, 11),
> + [ANA_TABLES_MACTINDX_M_INDEX] = REG_FIELD(ANA_TABLES_MACTINDX, 0, 9),
> + [GCB_SOFT_RST_SWC_RST] = REG_FIELD(GCB_SOFT_RST, 1, 1),
> + [QSYS_TIMED_FRAME_ENTRY_TFRM_VLD] = REG_FIELD(QSYS_TIMED_FRAME_ENTRY, 20, 20),
> + [QSYS_TIMED_FRAME_ENTRY_TFRM_FP] = REG_FIELD(QSYS_TIMED_FRAME_ENTRY, 8, 19),
> + [QSYS_TIMED_FRAME_ENTRY_TFRM_PORTNO] = REG_FIELD(QSYS_TIMED_FRAME_ENTRY, 4, 7),
> + [QSYS_TIMED_FRAME_ENTRY_TFRM_TM_SEL] = REG_FIELD(QSYS_TIMED_FRAME_ENTRY, 1, 3),
> + [QSYS_TIMED_FRAME_ENTRY_TFRM_TM_T] = REG_FIELD(QSYS_TIMED_FRAME_ENTRY, 0, 0),
> + [SYS_RESET_CFG_CORE_ENA] = REG_FIELD(SYS_RESET_CFG, 2, 2),
> + [SYS_RESET_CFG_MEM_ENA] = REG_FIELD(SYS_RESET_CFG, 1, 1),
> + [SYS_RESET_CFG_MEM_INIT] = REG_FIELD(SYS_RESET_CFG, 0, 0),
> + /* Replicated per number of ports (12), register size 4 per port */
> + [QSYS_SWITCH_PORT_MODE_PORT_ENA] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 14, 14, 12, 4),
> + [QSYS_SWITCH_PORT_MODE_SCH_NEXT_CFG] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 11, 13, 12, 4),
> + [QSYS_SWITCH_PORT_MODE_YEL_RSRVD] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 10, 10, 12, 4),
> + [QSYS_SWITCH_PORT_MODE_INGRESS_DROP_MODE] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 9, 9, 12, 4),
> + [QSYS_SWITCH_PORT_MODE_TX_PFC_ENA] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 1, 8, 12, 4),
> + [QSYS_SWITCH_PORT_MODE_TX_PFC_MODE] = REG_FIELD_ID(QSYS_SWITCH_PORT_MODE, 0, 0, 12, 4),
> + [SYS_PORT_MODE_DATA_WO_TS] = REG_FIELD_ID(SYS_PORT_MODE, 5, 6, 12, 4),
> + [SYS_PORT_MODE_INCL_INJ_HDR] = REG_FIELD_ID(SYS_PORT_MODE, 3, 4, 12, 4),
> + [SYS_PORT_MODE_INCL_XTR_HDR] = REG_FIELD_ID(SYS_PORT_MODE, 1, 2, 12, 4),
> + [SYS_PORT_MODE_INCL_HDR_ERR] = REG_FIELD_ID(SYS_PORT_MODE, 0, 0, 12, 4),
> + [SYS_PAUSE_CFG_PAUSE_START] = REG_FIELD_ID(SYS_PAUSE_CFG, 10, 18, 12, 4),
> + [SYS_PAUSE_CFG_PAUSE_STOP] = REG_FIELD_ID(SYS_PAUSE_CFG, 1, 9, 12, 4),
> + [SYS_PAUSE_CFG_PAUSE_ENA] = REG_FIELD_ID(SYS_PAUSE_CFG, 0, 1, 12, 4),
> +};
> +
> +static const struct ocelot_stat_layout vsc7512_stats_layout[] = {
> + { .offset = 0x00, .name = "rx_octets", },
> + { .offset = 0x01, .name = "rx_unicast", },
> + { .offset = 0x02, .name = "rx_multicast", },
> + { .offset = 0x03, .name = "rx_broadcast", },
> + { .offset = 0x04, .name = "rx_shorts", },
> + { .offset = 0x05, .name = "rx_fragments", },
> + { .offset = 0x06, .name = "rx_jabbers", },
> + { .offset = 0x07, .name = "rx_crc_align_errs", },
> + { .offset = 0x08, .name = "rx_sym_errs", },
> + { .offset = 0x09, .name = "rx_frames_below_65_octets", },
> + { .offset = 0x0A, .name = "rx_frames_65_to_127_octets", },
> + { .offset = 0x0B, .name = "rx_frames_128_to_255_octets", },
> + { .offset = 0x0C, .name = "rx_frames_256_to_511_octets", },
> + { .offset = 0x0D, .name = "rx_frames_512_to_1023_octets", },
> + { .offset = 0x0E, .name = "rx_frames_1024_to_1526_octets", },
> + { .offset = 0x0F, .name = "rx_frames_over_1526_octets", },
> + { .offset = 0x10, .name = "rx_pause", },
> + { .offset = 0x11, .name = "rx_control", },
> + { .offset = 0x12, .name = "rx_longs", },
> + { .offset = 0x13, .name = "rx_classified_drops", },
> + { .offset = 0x14, .name = "rx_red_prio_0", },
> + { .offset = 0x15, .name = "rx_red_prio_1", },
> + { .offset = 0x16, .name = "rx_red_prio_2", },
> + { .offset = 0x17, .name = "rx_red_prio_3", },
> + { .offset = 0x18, .name = "rx_red_prio_4", },
> + { .offset = 0x19, .name = "rx_red_prio_5", },
> + { .offset = 0x1A, .name = "rx_red_prio_6", },
> + { .offset = 0x1B, .name = "rx_red_prio_7", },
> + { .offset = 0x1C, .name = "rx_yellow_prio_0", },
> + { .offset = 0x1D, .name = "rx_yellow_prio_1", },
> + { .offset = 0x1E, .name = "rx_yellow_prio_2", },
> + { .offset = 0x1F, .name = "rx_yellow_prio_3", },
> + { .offset = 0x20, .name = "rx_yellow_prio_4", },
> + { .offset = 0x21, .name = "rx_yellow_prio_5", },
> + { .offset = 0x22, .name = "rx_yellow_prio_6", },
> + { .offset = 0x23, .name = "rx_yellow_prio_7", },
> + { .offset = 0x24, .name = "rx_green_prio_0", },
> + { .offset = 0x25, .name = "rx_green_prio_1", },
> + { .offset = 0x26, .name = "rx_green_prio_2", },
> + { .offset = 0x27, .name = "rx_green_prio_3", },
> + { .offset = 0x28, .name = "rx_green_prio_4", },
> + { .offset = 0x29, .name = "rx_green_prio_5", },
> + { .offset = 0x2A, .name = "rx_green_prio_6", },
> + { .offset = 0x2B, .name = "rx_green_prio_7", },
> + { .offset = 0x40, .name = "tx_octets", },
> + { .offset = 0x41, .name = "tx_unicast", },
> + { .offset = 0x42, .name = "tx_multicast", },
> + { .offset = 0x43, .name = "tx_broadcast", },
> + { .offset = 0x44, .name = "tx_collision", },
> + { .offset = 0x45, .name = "tx_drops", },
> + { .offset = 0x46, .name = "tx_pause", },
> + { .offset = 0x47, .name = "tx_frames_below_65_octets", },
> + { .offset = 0x48, .name = "tx_frames_65_to_127_octets", },
> + { .offset = 0x49, .name = "tx_frames_128_255_octets", },
> + { .offset = 0x4A, .name = "tx_frames_256_511_octets", },
> + { .offset = 0x4B, .name = "tx_frames_512_1023_octets", },
> + { .offset = 0x4C, .name = "tx_frames_1024_1526_octets", },
> + { .offset = 0x4D, .name = "tx_frames_over_1526_octets", },
> + { .offset = 0x4E, .name = "tx_yellow_prio_0", },
> + { .offset = 0x4F, .name = "tx_yellow_prio_1", },
> + { .offset = 0x50, .name = "tx_yellow_prio_2", },
> + { .offset = 0x51, .name = "tx_yellow_prio_3", },
> + { .offset = 0x52, .name = "tx_yellow_prio_4", },
> + { .offset = 0x53, .name = "tx_yellow_prio_5", },
> + { .offset = 0x54, .name = "tx_yellow_prio_6", },
> + { .offset = 0x55, .name = "tx_yellow_prio_7", },
> + { .offset = 0x56, .name = "tx_green_prio_0", },
> + { .offset = 0x57, .name = "tx_green_prio_1", },
> + { .offset = 0x58, .name = "tx_green_prio_2", },
> + { .offset = 0x59, .name = "tx_green_prio_3", },
> + { .offset = 0x5A, .name = "tx_green_prio_4", },
> + { .offset = 0x5B, .name = "tx_green_prio_5", },
> + { .offset = 0x5C, .name = "tx_green_prio_6", },
> + { .offset = 0x5D, .name = "tx_green_prio_7", },
> + { .offset = 0x5E, .name = "tx_aged", },
> + { .offset = 0x80, .name = "drop_local", },
> + { .offset = 0x81, .name = "drop_tail", },
> + { .offset = 0x82, .name = "drop_yellow_prio_0", },
> + { .offset = 0x83, .name = "drop_yellow_prio_1", },
> + { .offset = 0x84, .name = "drop_yellow_prio_2", },
> + { .offset = 0x85, .name = "drop_yellow_prio_3", },
> + { .offset = 0x86, .name = "drop_yellow_prio_4", },
> + { .offset = 0x87, .name = "drop_yellow_prio_5", },
> + { .offset = 0x88, .name = "drop_yellow_prio_6", },
> + { .offset = 0x89, .name = "drop_yellow_prio_7", },
> + { .offset = 0x8A, .name = "drop_green_prio_0", },
> + { .offset = 0x8B, .name = "drop_green_prio_1", },
> + { .offset = 0x8C, .name = "drop_green_prio_2", },
> + { .offset = 0x8D, .name = "drop_green_prio_3", },
> + { .offset = 0x8E, .name = "drop_green_prio_4", },
> + { .offset = 0x8F, .name = "drop_green_prio_5", },
> + { .offset = 0x90, .name = "drop_green_prio_6", },
> + { .offset = 0x91, .name = "drop_green_prio_7", },
> +};
> +
> +static void vsc7512_phylink_validate(struct ocelot *ocelot, int port,
> + unsigned long *supported,
> + struct phylink_link_state *state)
> +{
> + struct ocelot_port *ocelot_port = ocelot->ports[port];
> +
> + __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
> +
> + if (state->interface != PHY_INTERFACE_MODE_NA &&
> + state->interface != ocelot_port->phy_mode) {
> + bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
> + return;
> + }
> +
> + phylink_set_port_modes(mask);
> +
> + phylink_set(mask, Pause);
> + phylink_set(mask, Autoneg);
> + phylink_set(mask, Asym_Pause);
> + phylink_set(mask, 10baseT_Half);
> + phylink_set(mask, 10baseT_Full);
> + phylink_set(mask, 100baseT_Half);
> + phylink_set(mask, 100baseT_Full);
> + phylink_set(mask, 1000baseT_Half);
> + phylink_set(mask, 1000baseT_Full);
> +
> + bitmap_and(supported, supported, mask, __ETHTOOL_LINK_MODE_MASK_NBITS);
> + bitmap_and(state->advertising, state->advertising, mask,
> + __ETHTOOL_LINK_MODE_MASK_NBITS);
> +}
> +
> +static int vsc7512_prevalidate_phy_mode(struct ocelot *ocelot, int port,
> + phy_interface_t phy_mode)
> +{
> + struct ocelot_ext_data *ocelot_ext = ocelot_to_ocelot_ext(ocelot);
> +
> + switch (phy_mode) {
> + case PHY_INTERFACE_MODE_INTERNAL:
> + if (ocelot_ext->port_modes[port] &
> + OCELOT_SPI_PORT_MODE_INTERNAL)
> + return 0;
> + return -EOPNOTSUPP;
> + case PHY_INTERFACE_MODE_SGMII:
> + if (ocelot_ext->port_modes[port] & OCELOT_SPI_PORT_MODE_SGMII)
> + return 0;
> + return -EOPNOTSUPP;
> + case PHY_INTERFACE_MODE_QSGMII:
> + if (ocelot_ext->port_modes[port] & OCELOT_SPI_PORT_MODE_QSGMII)
> + return 0;
> + return -EOPNOTSUPP;
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static int vsc7512_port_setup_tc(struct dsa_switch *ds, int port,
> + enum tc_setup_type type, void *type_data)
> +{
> + return -EOPNOTSUPP;
> +}
The absence of this callback should return -EOPNOTSUPP as well, from
felix_port_setup_tc().
> +
> +static struct vcap_props vsc7512_vcap_props[] = {
> + [VCAP_ES0] = {
> + .action_type_width = 0,
> + .action_table = {
> + [ES0_ACTION_TYPE_NORMAL] = {
> + .width = 73,
> + .count = 1,
> + },
> + },
> + .target = S0,
> + .keys = vsc7514_vcap_es0_keys,
> + .actions = vsc7514_vcap_es0_actions,
> + },
> + [VCAP_IS1] = {
> + .action_type_width = 0,
> + .action_table = {
> + [IS1_ACTION_TYPE_NORMAL] = {
> + .width = 78,
> + .count = 4,
> + },
> + },
> + .target = S1,
> + .keys = vsc7514_vcap_is1_keys,
> + .actions = vsc7514_vcap_is1_actions,
> + },
> + [VCAP_IS2] = {
> + .action_type_width = 1,
> + .action_table = {
> + [IS2_ACTION_TYPE_NORMAL] = {
> + .width = 49,
> + .count = 2,
> + },
> + [IS2_ACTION_TYPE_SMAC_SIP] = {
> + .width = 6,
> + .count = 4,
> + },
> + },
> + .target = S2,
> + .keys = vsc7514_vcap_is2_keys,
> + .actions = vsc7514_vcap_is2_actions,
> + },
> +};
> +
> +static struct regmap *vsc7512_regmap_init(struct ocelot *ocelot,
> + struct resource *res)
> +{
> + struct device *dev = ocelot->dev;
> + struct regmap *regmap;
> +
> + regmap = ocelot_get_regmap_from_resource(dev->parent, res);
> + if (IS_ERR(regmap))
> + return ERR_CAST(regmap);
> +
> + return regmap;
Seems like a long-winded way of typing "return ocelot_get_regmap_from_resource(...)"?
> +}
> +
> +static int vsc7512_mdio_bus_alloc(struct ocelot *ocelot)
> +{
> + struct felix *felix = ocelot_to_felix(ocelot);
> + struct device *dev = ocelot->dev;
> + u32 mii_offset, phy_offset;
> + struct mii_bus *bus;
> + int err;
> +
> + mii_offset = ocelot_offset_from_reg_base(ocelot, GCB,
> + GCB_MIIM_MII_STATUS);
> +
> + phy_offset = ocelot_offset_from_reg_base(ocelot, GCB, GCB_PHY_PHY_CFG);
> +
> + err = mscc_miim_setup(dev, &bus, "ocelot_ext MDIO bus",
> + ocelot->targets[GCB], mii_offset,
> + ocelot->targets[GCB], phy_offset);
> + if (err) {
> + dev_err(dev, "failed to setup MDIO bus\n");
> + return err;
> + }
> +
> + felix->imdio = bus;
> +
> + return err;
> +}
> +
> +
> +static void vsc7512_mdio_bus_free(struct ocelot *ocelot)
> +{
> + struct felix *felix = ocelot_to_felix(ocelot);
> +
> + if (felix->imdio)
I don't think the conditional is warranted here? Did you notice a call
path where you were called while felix->imdio was NULL?
> + mdiobus_unregister(felix->imdio);
> +}
> +
> +static const struct felix_info ocelot_ext_info = {
> + .target_io_res = vsc7512_target_io_res,
> + .port_io_res = vsc7512_port_io_res,
> + .regfields = vsc7512_regfields,
> + .map = vsc7512_regmap,
> + .ops = &vsc7512_ops,
> + .stats_layout = vsc7512_stats_layout,
> + .num_stats = ARRAY_SIZE(vsc7512_stats_layout),
> + .vcap = vsc7512_vcap_props,
> + .num_mact_rows = 1024,
> + .num_ports = VSC7512_NUM_PORTS,
> + .num_tx_queues = OCELOT_NUM_TC,
> + .mdio_bus_alloc = vsc7512_mdio_bus_alloc,
> + .mdio_bus_free = vsc7512_mdio_bus_free,
> + .phylink_validate = vsc7512_phylink_validate,
> + .prevalidate_phy_mode = vsc7512_prevalidate_phy_mode,
> + .port_setup_tc = vsc7512_port_setup_tc,
> + .init_regmap = vsc7512_regmap_init,
> +};
> +
> +static int ocelot_ext_probe(struct platform_device *pdev)
> +{
> + struct ocelot_ext_data *ocelot_ext;
> + struct dsa_switch *ds;
> + struct ocelot *ocelot;
> + struct felix *felix;
> + struct device *dev;
> + int err;
> +
> + dev = &pdev->dev;
> +
> + ocelot_ext = devm_kzalloc(dev, sizeof(struct ocelot_ext_data),
> + GFP_KERNEL);
> +
> + if (!ocelot_ext)
Try to omit blank lines between an assignment and the proceeding sanity
checks. Also, try to stick to either using devres everywhere, or nowhere,
within the same function at least.
> + return -ENOMEM;
> +
> + dev_set_drvdata(dev, ocelot_ext);
> +
> + ocelot_ext->port_modes = vsc7512_port_modes;
> + felix = &ocelot_ext->felix;
> +
> + ocelot = &felix->ocelot;
> + ocelot->dev = dev;
> +
> + ocelot->num_flooding_pgids = 1;
> +
> + felix->info = &ocelot_ext_info;
> +
> + ds = kzalloc(sizeof(*ds), GFP_KERNEL);
> + if (!ds) {
> + err = -ENOMEM;
> + dev_err(dev, "Failed to allocate DSA switch\n");
> + return err;
> + }
> +
> + ds->dev = dev;
> + ds->num_ports = felix->info->num_ports;
> + ds->num_tx_queues = felix->info->num_tx_queues;
> +
> + ds->ops = &felix_switch_ops;
> + ds->priv = ocelot;
> + felix->ds = ds;
> + felix->tag_proto = DSA_TAG_PROTO_OCELOT;
> +
> + err = dsa_register_switch(ds);
> +
> + if (err) {
> + dev_err(dev, "Failed to register DSA switch: %d\n", err);
> + goto err_register_ds;
> + }
> +
> + return 0;
> +
> +err_register_ds:
> + kfree(ds);
> + return err;
> +}
> +
> +static int ocelot_ext_remove(struct platform_device *pdev)
> +{
> + struct ocelot_ext_data *ocelot_ext;
> + struct felix *felix;
> +
> + ocelot_ext = dev_get_drvdata(&pdev->dev);
> + felix = &ocelot_ext->felix;
> +
> + dsa_unregister_switch(felix->ds);
> +
> + kfree(felix->ds);
> +
> + devm_kfree(&pdev->dev, ocelot_ext);
What is the point of devm_kfree?
> +
> + return 0;
> +}
> +
> +const struct of_device_id ocelot_ext_switch_of_match[] = {
> + { .compatible = "mscc,vsc7512-ext-switch" },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, ocelot_ext_switch_of_match);
> +
> +static struct platform_driver ocelot_ext_switch_driver = {
> + .driver = {
> + .name = "ocelot-ext-switch",
> + .of_match_table = of_match_ptr(ocelot_ext_switch_of_match),
> + },
> + .probe = ocelot_ext_probe,
> + .remove = ocelot_ext_remove,
Please blindly follow the pattern of every other DSA driver, with a
->remove and ->shutdown method that run either one, or the other, by
checking whether dev_get_drvdata() has been set to NULL by the other one
or not. And call dsa_switch_shutdown() from ocelot_ext_shutdown() (or
vsc7512_shutdown, or whatever you decide to call it).
> +};
> +module_platform_driver(ocelot_ext_switch_driver);
> +
> +MODULE_DESCRIPTION("External Ocelot Switch driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h
> index 8b8ebede5a01..62cd61d4142e 100644
> --- a/include/soc/mscc/ocelot.h
> +++ b/include/soc/mscc/ocelot.h
> @@ -399,6 +399,8 @@ enum ocelot_reg {
> GCB_MIIM_MII_STATUS,
> GCB_MIIM_MII_CMD,
> GCB_MIIM_MII_DATA,
> + GCB_PHY_PHY_CFG,
> + GCB_PHY_PHY_STAT,
> DEV_CLOCK_CFG = DEV_GMII << TARGET_OFFSET,
> DEV_PORT_MISC,
> DEV_EVENTS,
> --
> 2.25.1
>
Powered by blists - more mailing lists