[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220131105236.319378045@linuxfoundation.org>
Date: Mon, 31 Jan 2022 11:55:44 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Guenter Roeck <linux@...ck-us.net>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Xu Yang <xu.yang_2@....com>
Subject: [PATCH 5.16 081/200] usb: typec: tcpci: dont touch CC line if its Vconn source
From: Xu Yang <xu.yang_2@....com>
commit 5638b0dfb6921f69943c705383ff40fb64b987f2 upstream.
With the AMS and Collision Avoidance, tcpm often needs to change the CC's
termination. When one CC line is sourcing Vconn, if we still change its
termination, the voltage of the another CC line is likely to be fluctuant
and unstable.
Therefore, we should verify whether a CC line is sourcing Vconn before
changing its termination and only change the termination that is not
a Vconn line. This can be done by reading the Vconn Present bit of
POWER_ STATUS register. To determine the polarity, we can read the
Plug Orientation bit of TCPC_CONTROL register. Since Vconn can only be
sourced if Plug Orientation is set.
Fixes: 0908c5aca31e ("usb: typec: tcpm: AMS and Collision Avoidance")
cc: <stable@...r.kernel.org>
Reviewed-by: Guenter Roeck <linux@...ck-us.net>
Acked-by: Heikki Krogerus <heikki.krogerus@...ux.intel.com>
Signed-off-by: Xu Yang <xu.yang_2@....com>
Link: https://lore.kernel.org/r/20220113092943.752372-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/usb/typec/tcpm/tcpci.c | 26 ++++++++++++++++++++++++++
drivers/usb/typec/tcpm/tcpci.h | 1 +
2 files changed, 27 insertions(+)
--- a/drivers/usb/typec/tcpm/tcpci.c
+++ b/drivers/usb/typec/tcpm/tcpci.c
@@ -75,9 +75,25 @@ static int tcpci_write16(struct tcpci *t
static int tcpci_set_cc(struct tcpc_dev *tcpc, enum typec_cc_status cc)
{
struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
+ bool vconn_pres;
+ enum typec_cc_polarity polarity = TYPEC_POLARITY_CC1;
unsigned int reg;
int ret;
+ ret = regmap_read(tcpci->regmap, TCPC_POWER_STATUS, ®);
+ if (ret < 0)
+ return ret;
+
+ vconn_pres = !!(reg & TCPC_POWER_STATUS_VCONN_PRES);
+ if (vconn_pres) {
+ ret = regmap_read(tcpci->regmap, TCPC_TCPC_CTRL, ®);
+ if (ret < 0)
+ return ret;
+
+ if (reg & TCPC_TCPC_CTRL_ORIENTATION)
+ polarity = TYPEC_POLARITY_CC2;
+ }
+
switch (cc) {
case TYPEC_CC_RA:
reg = (TCPC_ROLE_CTRL_CC_RA << TCPC_ROLE_CTRL_CC1_SHIFT) |
@@ -112,6 +128,16 @@ static int tcpci_set_cc(struct tcpc_dev
break;
}
+ if (vconn_pres) {
+ if (polarity == TYPEC_POLARITY_CC2) {
+ reg &= ~(TCPC_ROLE_CTRL_CC1_MASK << TCPC_ROLE_CTRL_CC1_SHIFT);
+ reg |= (TCPC_ROLE_CTRL_CC_OPEN << TCPC_ROLE_CTRL_CC1_SHIFT);
+ } else {
+ reg &= ~(TCPC_ROLE_CTRL_CC2_MASK << TCPC_ROLE_CTRL_CC2_SHIFT);
+ reg |= (TCPC_ROLE_CTRL_CC_OPEN << TCPC_ROLE_CTRL_CC2_SHIFT);
+ }
+ }
+
ret = regmap_write(tcpci->regmap, TCPC_ROLE_CTRL, reg);
if (ret < 0)
return ret;
--- a/drivers/usb/typec/tcpm/tcpci.h
+++ b/drivers/usb/typec/tcpm/tcpci.h
@@ -98,6 +98,7 @@
#define TCPC_POWER_STATUS_SOURCING_VBUS BIT(4)
#define TCPC_POWER_STATUS_VBUS_DET BIT(3)
#define TCPC_POWER_STATUS_VBUS_PRES BIT(2)
+#define TCPC_POWER_STATUS_VCONN_PRES BIT(1)
#define TCPC_POWER_STATUS_SINKING_VBUS BIT(0)
#define TCPC_FAULT_STATUS 0x1f
Powered by blists - more mailing lists