| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220201205328.123066-10-dwmw2@infradead.org>
Date: Tue, 1 Feb 2022 20:53:28 +0000
From: David Woodhouse <dwmw2@...radead.org>
To: Thomas Gleixner <tglx@...utronix.de>
Cc: Ingo Molnar <mingo@...hat.com>, Borislav Petkov <bp@...en8.de>,
Dave Hansen <dave.hansen@...ux.intel.com>, x86@...nel.org,
"H . Peter Anvin" <hpa@...or.com>,
Paolo Bonzini <pbonzini@...hat.com>,
"Paul E . McKenney" <paulmck@...nel.org>,
linux-kernel@...r.kernel.org, kvm@...r.kernel.org,
rcu@...r.kernel.org, mimoja@...oja.de, hewenliang4@...wei.com,
hushiyuan@...wei.com, luolongjun@...wei.com, hejingxian@...wei.com,
Tom Lendacky <thomas.lendacky@....com>,
Sean Christopherson <seanjc@...gle.com>,
Paul Menzel <pmenzel@...gen.mpg.de>
Subject: [PATCH v4 9/9] x86/smpboot: Serialize topology updates for secondary bringup
From: David Woodhouse <dwmw@...zon.co.uk>
If we bring up secondaries in parallel they might get confused unless we
impose some ordering here:
[ 1.360149] x86: Booting SMP configuration:
[ 1.360221] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23
[ 1.366225] .... node #1, CPUs: #24 #25 #26 #27 #28 #29 #30 #31 #32 #33 #34 #35 #36 #37 #38 #39 #40 #41 #42 #43 #44 #45 #46 #47
[ 1.370219] .... node #0, CPUs: #48 #49 #50 #51 #52 #53 #54 #55 #56 #57 #58 #59 #60 #61 #62 #63 #64 #65 #66 #67 #68 #69 #70 #71
[ 1.378226] .... node #1, CPUs: #72 #73 #74 #75 #76 #77 #78 #79 #80 #81 #82 #83 #84 #85 #86 #87 #88 #89 #90 #91 #92 #93 #94 #95
[ 1.382037] Brought 96 CPUs to x86/cpu:kick in 72232606 cycles
[ 0.104104] smpboot: CPU 26 Converting physical 0 to logical die 1
[ 0.104104] smpboot: CPU 27 Converting physical 1 to logical package 2
[ 0.104104] smpboot: CPU 24 Converting physical 1 to logical package 3
[ 0.104104] smpboot: CPU 27 Converting physical 0 to logical die 2
[ 0.104104] smpboot: CPU 25 Converting physical 1 to logical package 4
[ 1.385609] Brought 96 CPUs to x86/cpu:wait-init in 9269218 cycles
[ 1.395285] Brought CPUs online in 28930764 cycles
[ 1.395469] smp: Brought up 2 nodes, 96 CPUs
[ 1.395689] smpboot: Max logical packages: 2
[ 1.396222] smpboot: Total of 96 processors activated (576000.00 BogoMIPS)
Do the full topology update in smp_store_cpu_info() under a spinlock
to ensure that things remain consistent.
Signed-off-by: David Woodhouse <dwmw@...zon.co.uk>
---
arch/x86/include/asm/smp.h | 4 +-
arch/x86/include/asm/topology.h | 2 -
arch/x86/kernel/cpu/common.c | 6 +--
arch/x86/kernel/smpboot.c | 73 ++++++++++++++++++++-------------
arch/x86/xen/smp_pv.c | 4 +-
5 files changed, 48 insertions(+), 41 deletions(-)
diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h
index 4fe1320c2e8d..1df2951ca0bd 100644
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -59,8 +59,6 @@ struct smp_ops {
};
/* Globals due to paravirt */
-extern void set_cpu_sibling_map(int cpu);
-
#ifdef CONFIG_SMP
extern struct smp_ops smp_ops;
@@ -148,7 +146,7 @@ void native_send_call_func_single_ipi(int cpu);
void x86_idle_thread_init(unsigned int cpu, struct task_struct *idle);
void smp_store_boot_cpu_info(void);
-void smp_store_cpu_info(int id);
+void smp_store_cpu_info(int id, bool force_single_core);
asmlinkage __visible void smp_reboot_interrupt(void);
__visible void smp_reschedule_interrupt(struct pt_regs *regs);
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 2f0b6be8eaab..a4e14ae3f1e1 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -135,8 +135,6 @@ static inline int topology_max_smt_threads(void)
return __max_smt_threads;
}
-int topology_update_package_map(unsigned int apicid, unsigned int cpu);
-int topology_update_die_map(unsigned int dieid, unsigned int cpu);
int topology_phys_to_logical_pkg(unsigned int pkg);
int topology_phys_to_logical_die(unsigned int die, unsigned int cpu);
bool topology_is_primary_thread(unsigned int cpu);
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 7b8382c11788..623b910971e1 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1517,7 +1517,7 @@ static void generic_identify(struct cpuinfo_x86 *c)
* Validate that ACPI/mptables have the same information about the
* effective APIC id and update the package map.
*/
-static void validate_apic_and_package_id(struct cpuinfo_x86 *c)
+static void validate_apic_id(struct cpuinfo_x86 *c)
{
#ifdef CONFIG_SMP
unsigned int apicid, cpu = smp_processor_id();
@@ -1528,8 +1528,6 @@ static void validate_apic_and_package_id(struct cpuinfo_x86 *c)
pr_err(FW_BUG "CPU%u: APIC id mismatch. Firmware: %x APIC: %x\n",
cpu, apicid, c->initial_apicid);
}
- BUG_ON(topology_update_package_map(c->phys_proc_id, cpu));
- BUG_ON(topology_update_die_map(c->cpu_die_id, cpu));
#else
c->logical_proc_id = 0;
#endif
@@ -1716,7 +1714,7 @@ void identify_secondary_cpu(struct cpuinfo_x86 *c)
enable_sep_cpu();
#endif
mtrr_ap_init();
- validate_apic_and_package_id(c);
+ validate_apic_id(c);
x86_spec_ctrl_setup_ap();
update_srbds_msr();
}
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index e0ae7ee18d34..147eedd93329 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -190,16 +190,12 @@ static void smp_callin(void)
apic_ap_setup();
/*
- * Save our processor parameters. Note: this information
- * is needed for clock calibration.
- */
- smp_store_cpu_info(cpuid);
-
- /*
+ * Save our processor parameters and update topology.
+ * Note: this information is needed for clock calibration.
* The topology information must be up to date before
* calibrate_delay() and notify_cpu_starting().
*/
- set_cpu_sibling_map(raw_smp_processor_id());
+ smp_store_cpu_info(cpuid, false);
init_freq_invariance(true, false);
@@ -254,6 +250,12 @@ static void notrace start_secondary(void *unused)
* smp_callout_mask to release them.
*/
cpu_init_secondary();
+
+ /*
+ * Even though notify_cpu_starting() will do this, it does so too late
+ * as the AP may already have triggered lockdep splats by then. See
+ * commit 29368e093 ("x86/smpboot: Move rcu_cpu_starting() earlier").
+ */
rcu_cpu_starting(raw_smp_processor_id());
x86_cpuinit.early_percpu_clock_init();
@@ -362,7 +364,7 @@ EXPORT_SYMBOL(topology_phys_to_logical_die);
* @pkg: The physical package id as retrieved via CPUID
* @cpu: The cpu for which this is updated
*/
-int topology_update_package_map(unsigned int pkg, unsigned int cpu)
+static int topology_update_package_map(unsigned int pkg, unsigned int cpu)
{
int new;
@@ -385,7 +387,7 @@ int topology_update_package_map(unsigned int pkg, unsigned int cpu)
* @die: The die id as retrieved via CPUID
* @cpu: The cpu for which this is updated
*/
-int topology_update_die_map(unsigned int die, unsigned int cpu)
+static int topology_update_die_map(unsigned int die, unsigned int cpu)
{
int new;
@@ -416,25 +418,7 @@ void __init smp_store_boot_cpu_info(void)
c->initialized = true;
}
-/*
- * The bootstrap kernel entry code has set these up. Save them for
- * a given CPU
- */
-void smp_store_cpu_info(int id)
-{
- struct cpuinfo_x86 *c = &cpu_data(id);
-
- /* Copy boot_cpu_data only on the first bringup */
- if (!c->initialized)
- *c = boot_cpu_data;
- c->cpu_index = id;
- /*
- * During boot time, CPU0 has this setup already. Save the info when
- * bringing up AP or offlined CPU0.
- */
- identify_secondary_cpu(c);
- c->initialized = true;
-}
+static arch_spinlock_t topology_lock = __ARCH_SPIN_LOCK_UNLOCKED;
static bool
topology_same_node(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
@@ -640,7 +624,7 @@ static struct sched_domain_topology_level x86_topology[] = {
*/
static bool x86_has_numa_in_package;
-void set_cpu_sibling_map(int cpu)
+static void set_cpu_sibling_map(int cpu)
{
bool has_smt = smp_num_siblings > 1;
bool has_mp = has_smt || boot_cpu_data.x86_max_cores > 1;
@@ -719,6 +703,37 @@ void set_cpu_sibling_map(int cpu)
}
}
+/*
+ * The bootstrap kernel entry code has set these up. Save them for
+ * a given CPU
+ */
+void smp_store_cpu_info(int id, bool force_single_core)
+{
+ struct cpuinfo_x86 *c = &cpu_data(id);
+
+ /* Copy boot_cpu_data only on the first bringup */
+ if (!c->initialized)
+ *c = boot_cpu_data;
+ c->cpu_index = id;
+ /*
+ * During boot time, CPU0 has this setup already. Save the info when
+ * bringing up AP or offlined CPU0.
+ */
+ identify_secondary_cpu(c);
+
+ arch_spin_lock(&topology_lock);
+ BUG_ON(topology_update_package_map(c->phys_proc_id, id));
+ BUG_ON(topology_update_die_map(c->cpu_die_id, id));
+ c->initialized = true;
+
+ /* For Xen PV */
+ if (force_single_core)
+ c->x86_max_cores = 1;
+
+ set_cpu_sibling_map(id);
+ arch_spin_unlock(&topology_lock);
+}
+
/* maps the cpu to the sched domain representing multi-core */
const struct cpumask *cpu_coregroup_mask(int cpu)
{
diff --git a/arch/x86/xen/smp_pv.c b/arch/x86/xen/smp_pv.c
index 6a8f3b53ab83..ff37dff20dc0 100644
--- a/arch/x86/xen/smp_pv.c
+++ b/arch/x86/xen/smp_pv.c
@@ -71,9 +71,7 @@ static void cpu_bringup(void)
xen_enable_syscall();
}
cpu = smp_processor_id();
- smp_store_cpu_info(cpu);
- cpu_data(cpu).x86_max_cores = 1;
- set_cpu_sibling_map(cpu);
+ smp_store_cpu_info(cpu, true);
speculative_store_bypass_ht_init();
--
2.33.1
Powered by blists - more mailing lists