[<prev] [next>] [day] [month] [year] [list]
Message-ID: <20220201052650.GA29389@pengutronix.de>
Date: Tue, 1 Feb 2022 06:26:50 +0100
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Sam Ravnborg <sam@...nborg.org>
Cc: Mark Rutland <mark.rutland@....com>, devicetree@...r.kernel.org,
Pengutronix Kernel Team <kernel@...gutronix.de>,
dri-devel@...ts.freedesktop.org,
Robin van der Gracht <robin@...tonic.nl>,
David Airlie <airlied@...ux.ie>,
Fabio Estevam <festevam@...il.com>,
Sascha Hauer <s.hauer@...gutronix.de>,
linux-kernel@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
Thierry Reding <thierry.reding@...il.com>,
NXP Linux Team <linux-imx@....com>,
Daniel Vetter <daniel@...ll.ch>,
David Jander <david@...tonic.nl>,
Shawn Guo <shawnguo@...nel.org>,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v2 4/5] ARM: dts: imx6dl: plym2m, prtvt7, victgo: make
use of new resistive-adc-touch driver
Hi Sam,
On Mon, Jan 31, 2022 at 04:42:06PM +0100, Sam Ravnborg wrote:
> On Mon, Jan 31, 2022 at 11:28:40AM +0100, Oleksij Rempel wrote:
> > The tsc2046 is an ADC used as touchscreen controller. To share as mach
> much
> > code as possible, we should use it as actual ADC + virtual touchscreen
> > controller.
> > With this patch we make use of the new kernel IIO and HID infrastructure.
> >
> > Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
> > ---
> > arch/arm/boot/dts/imx6dl-plym2m.dts | 59 +++++++++++++++++++++--------
> > arch/arm/boot/dts/imx6dl-prtvt7.dts | 57 +++++++++++++++++++++-------
> > arch/arm/boot/dts/imx6dl-victgo.dts | 59 ++++++++++++++++++++++-------
> > 3 files changed, 132 insertions(+), 43 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/imx6dl-plym2m.dts b/arch/arm/boot/dts/imx6dl-plym2m.dts
> > index 60fe5f14666e..73c7622bfe0f 100644
> > --- a/arch/arm/boot/dts/imx6dl-plym2m.dts
> > +++ b/arch/arm/boot/dts/imx6dl-plym2m.dts
> > @@ -101,6 +101,18 @@ reg_12v0: regulator-12v0 {
> > regulator-min-microvolt = <12000000>;
> > regulator-max-microvolt = <12000000>;
> > };
> > +
> > + touchscreen {
> > + compatible = "resistive-adc-touch";
> > + io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
> > + <&adc_ts 5>;
> > + io-channel-names = "y", "z1", "z2", "x";
> > + touchscreen-min-pressure = <64687>;
> > + touchscreen-inverted-x;
> > + touchscreen-inverted-y;
> > + touchscreen-x-plate-ohms = <300>;
> > + touchscreen-y-plate-ohms = <800>;
> > + };
> > };
> >
> > &can1 {
> > @@ -129,26 +141,41 @@ &ecspi2 {
> > pinctrl-0 = <&pinctrl_ecspi2>;
> > status = "okay";
> >
> > - touchscreen@0 {
> > - compatible = "ti,tsc2046";
> > + adc_ts: adc@0 {
> > + compatible = "ti,tsc2046e-adc";
> > reg = <0>;
> > pinctrl-0 = <&pinctrl_tsc2046>;
> > pinctrl-names ="default";
> > - spi-max-frequency = <100000>;
> > - interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>;
> > - pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
> > + spi-max-frequency = <1000000>;
> > + interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
> > + #io-channel-cells = <1>;
>
> I quickly skimmed the patch - we seem to loose the pendown-gpio in most
> of the patches - I do not see it replaced.
pendown-gpio is not used by the new driver. It is replace by the IIO
trigger. Please see this comment:
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git/tree/drivers/iio/adc/ti-tsc2046.c?h=testing#n521
Regards,
Oleksij
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Powered by blists - more mailing lists