[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAD=FV=XhVC2g+Me_7Hj=cKEz_GxUJao7OSbfV-nT6GS535SpOA@mail.gmail.com>
Date: Mon, 31 Jan 2022 16:34:41 -0800
From: Doug Anderson <dianders@...omium.org>
To: Bjorn Andersson <bjorn.andersson@...aro.org>
Cc: Shaik Sajida Bhanu <sbhanu@...eaurora.org>,
Matthias Kaehlcke <mka@...omium.org>,
Stephen Boyd <swboyd@...omium.org>,
Andy Gross <agross@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 4/5] arm64: dts: qcom: sc7280: Clean up sdc1 / sdc2 pinctrl
Hi,
On Mon, Jan 31, 2022 at 4:33 PM Bjorn Andersson
<bjorn.andersson@...aro.org> wrote:
>
> On Mon 31 Jan 18:25 CST 2022, Doug Anderson wrote:
>
> > Hi,
> >
> > On Mon, Jan 31, 2022 at 4:11 PM Douglas Anderson <dianders@...omium.org> wrote:
> > >
> > > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > > index 40cb414bc377..dc98a87e2871 100644
> > > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > > @@ -616,6 +616,9 @@ qfprom: efuse@...000 {
> > >
> > > sdhc_1: sdhci@...000 {
> > > compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
> > > + pinctrl-names = "default", "sleep";
> > > + pinctrl-0 = <&sdc1_clk>, <&sdc1_cmd>, <&sdc1_data>, <&sdc1_rclk>;
> > > + pinctrl-1 = <&sdc1_clk_sleep>, <&sdc1_cmd_sleep>, <&sdc1_data_sleep>, <&sdc1_rclk_sleep>;
> > > status = "disabled";
> > >
> > > reg = <0 0x007c4000 0 0x1000>,
> > > @@ -2425,6 +2428,9 @@ apss_merge_funnel_in: endpoint {
> > >
> > > sdhc_2: sdhci@...4000 {
> > > compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
> > > + pinctrl-names = "default", "sleep";
> > > + pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>;
> > > + pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>;
> > > status = "disabled";
> > >
> > > reg = <0 0x08804000 0 0x1000>;
> > > @@ -3943,81 +3949,76 @@ qup_uart15_rx: qup-uart15-rx {
> > > function = "qup17";
> > > };
> > >
> > > - sdc1_on: sdc1-on {
> > > - clk {
> > > - pins = "sdc1_clk";
> > > - };
> > >
> > > - cmd {
> > > - pins = "sdc1_cmd";
> > > - };
> > >
> > > - data {
> > > - pins = "sdc1_data";
> > > - };
> > > + sdc1_clk: sdc1-clk {
> >
> > Ugh. I just noticed that there are way too many blank lines here in
> > the output. Happy to have this fixed when applying or I can post a v2.
> >
>
> I can fix that up as I apply it. Will let it sit for a few days to
> attract reviews first though.
Sounds good. Thanks! I might end up sending a v2 anyway since I found
a few more fixups, but I'll at least wait a day or two so I don't spam
people too hard.
-Doug
Powered by blists - more mailing lists