Message-ID: <d79bf21d-5a90-0074-cef6-896f66e80d28@somainline.org>
Date:   Tue, 1 Feb 2022 16:51:41 +0100
From:   Konrad Dybcio <konrad.dybcio@...ainline.org>
To:     Miquel Raynal <miquel.raynal@...tlin.com>
Cc:     Sricharan Ramabadhran <sricharan@...eaurora.org>,
        Manivannan Sadhasivam <mani@...nel.org>,
        pragalla@...eaurora.org, ~postmarketos/upstreaming@...ts.sr.ht,
        martin.botka@...ainline.org,
        angelogioacchino.delregno@...ainline.org,
        marijn.suijten@...ainline.org, jamipkettunen@...ainline.org,
        Richard Weinberger <richard@....at>,
        Vignesh Raghavendra <vigneshr@...com>,
        linux-mtd@...ts.infradead.org, linux-arm-msm@...r.kernel.org,
        linux-kernel@...r.kernel.org, mdalam@...eaurora.org
Subject: Re: [PATCH] mtd: nand: raw: qcom_nandc: Don't clear_bam_transaction
 on READID


On 01/02/2022 14:52, Miquel Raynal wrote:
> Hi Konrad,
>
> konrad.dybcio@...ainline.org wrote on Mon, 31 Jan 2022 20:54:12 +0100:
>
>> On 31/01/2022 15:13, Sricharan Ramabadhran wrote:
>>> Hi Konrad,
>>>
>>> On 1/31/2022 3:39 PM, Konrad Dybcio wrote:
>>>> On 28/01/2022 18:50, Sricharan Ramabadhran wrote:
>>>>> Hi Konrad,
>>>>>
>>>>> On 1/28/2022 9:55 AM, Sricharan Ramabadhran wrote:
>>>>>> Hi Miquel,
>>>>>>
>>>>>> On 1/26/2022 4:12 PM, Miquel Raynal wrote:
>>>>>>> Hi Mani,
>>>>>>>
>>>>>>> mani@...nel.org wrote on Wed, 26 Jan 2022 16:03:16 +0530:
>>>>>>>   
>>>>>>>> On Wed, Jan 26, 2022 at 11:16:13AM +0100, Miquel Raynal wrote:
>>>>>>>>> Hello,
>>>>>>>>>
>>>>>>>>> miquel.raynal@...tlin.com wrote on Fri, 14 Jan 2022 08:27:18 +0100:
>>>>>>>>>> Hi Konrad,
>>>>>>>>>>
>>>>>>>>>> konrad.dybcio@...ainline.org wrote on Thu, 13 Jan 2022 19:44:26 >>>>>>>> +0100:
>>>>>>>>>>> While I have absolutely 0 idea why and how, running >>>>>>>>> clear_bam_transaction
>>>>>>>>>>> when READID is issued makes the DMA totally clog up and refuse >>>>>>>>> to function
>>>>>>>>>>> at all on mdm9607. In fact, it is so bad that all the data >>>>>>>>> gets garbled
>>>>>>>>>>> and after a short while in the nand probe flow, the CPU >>>>>>>>> decides that
>>>>>>>>>>> sepuku is the only option.
>>>>>>>>>>>
>>>>>>>>>>> Removing _READID from the if condition makes it work like a >>>>>>>>> charm, I can
>>>>>>>>>>> read data and mount partitions without a problem.
>>>>>>>>>>>
>>>>>>>>>>> Signed-off-by: Konrad Dybcio <konrad.dybcio@...ainline.org>
>>>>>>>>>>> ---
>>>>>>>>>>> This is totally just an observation which took me an inhumane >>>>>>>>> amount of
>>>>>>>>>>> debug prints to find.. perhaps there's a better reason behind >>>>>>>>> this, but
>>>>>>>>>>> I can't seem to find any answers.. Therefore, this is a BIG RFC!
>>>>>>>>>> I'm adding two people from codeaurora who worked a lot on this >>>>>>>> driver.
>>>>>>>>>> Hopefully they will have an idea :)
>>>>>>>>> Sadre, I've spent a significant amount of time reviewing your >>>>>>> patches,
>>>>>>>>> now it's your turn to not take a month to answer to your peers
>>>>>>>>> proposals.
>>>>>>>>>
>>>>>>>>> Please help reviewing this patch.
>>>>>>>> Sorry. I was hoping that Qcom folks would chime in as I don't >>>>>> have any idea
>>>>>>>> about the mdm9607 platform. It could be that the mail server >>>>>> migration from
>>>>>>>> codeaurora to quicinc put a barrier here.
>>>>>>>>
>>>>>>>> Let me ping them internally.
>>>>>>> Oh, ok, I didn't know. Thanks!
>>>>>>     Sorry Miquel, somehow we did not get this email in our inbox.
>>>>>>     Thanks to Mani for pinging us, we will test this up today and >>>> get back.
>>>>>>   
>>>>>        While we could not reproduce this issue on our ipq boards (do >>> not have a mdm9607 right now) and
>>>>>         issue does not look any obvious.
>>>>>        can you please give the debug logs that you did for the above >>> stage by stage ?
>>>> I won't have access to the board for about two weeks, sorry.
>>>>
>>>> When I get to it, I'll surely try to send you the logs, though there
>>>>
>>>> wasn't much more than just something jumping to who-knows-where
>>>>
>>>> after clear_bam_transaction was called, resulting in values >> associated with
>>>>
>>>> the NAND being all zeroed out in pr_err/_debug/etc.
>>>>
>>>>   
>>>      Ok sure. So was the READID command itself failing (or) the > subsequent one ?
>>>     We can check which parameter reset by the clear_bam_transaction is > causing the
>>>     failure.  Meanwhile, looping in Pradeep who has access to the > board, so in a better
>>>     position to debug.
>> I'm sorry I have so few details on hand, and no kernel tree (no access to that machine either, for now).
>>
>>
>> I will try to describe to the best of my abilities what I recall.
>>
>>
>> My methodology of making sure things don't go haywire was to print the oob size
>>
>> of our NAND basically every two lines of code (yes, i was very desperate at one point),
>>
>> as that was zeroed out when *the bug* happened,
> This does look like a pointer error at some point and some kernel data
> has been corrupted very badly by the driver.
>
>> leading to a kernel bug/panic/stall
>>
>> (can't recall what exactly it was, but it said something along the lines of "no support for
>>
>> oob size 0" and then it didn't fail graceully, leading to some bad jumps and ultimately
>>
>> a dead platform..)
>>
>>
>> after hours of digging, I found out that everything goes fine until clear_bam_transaction is called,
> Do you remember if this function was called for the first time when
> this happened?

I think so, if I recall correctly there are no more callers in this 
path, as readid is the first nand command executed in flash probe flow.



>
>> after that gets executed every nand op starts reading all zeroes (for example in JEDEC ID check)
>>
>> so I added the changes from this patch, and things magically started working... My suspicion is
>>
>> that the underlying FIFO isn't fully drained (is it a FIFO on 9607? bah, i work on too many socs at once)
> I don't see it in the list of supported devices, what's the exact
> compatible used?

qcom,ipq4019-nand



>
>> and this function only makes Linux think it is, without actually draining it, and the leftover
>>
>> commands get executed with some parts of them getting overwritten, resulting in the
>>
>> famous garbage in - garbage out situation, but that's only a guesstimate..
> I would bet for a non allocated bam-ish pointer that is reset to zero
> in the clear_bam_transaction() helper.
>
> Can you get your hands on the board again?

Sure, but as I mentioned previously, only in about 2 weeks, I can't 
really do any dev before then.. :(



> It would be nice to check if the allocation always occurs before use,
> and if yes on how much bytes.
>
> If the pointer is not dangling, then perhaps something else smashes
> that pointer.


Konrad

>
>> Do note this somehow worked fine on 5.11 and then broke on 5.12/13. I went as far as replacing most
>>
>> of the kernel with the updated/downgraded parts via git checkout (i tried many combinations),
>>
>> to no avail.. I even tried different compilers and optimization levels, thinking it could have been
>>
>> a codegen issue, but no luck either.
>>
>>
>> I.. do understand this email is a total mess to read, as much as it was to write, but
>>
>> without access to my code and the machine itself I can't give you solid details, and
>>
>> the fact this situation is far from ordinary doesn't help either..
>>
>>
>> The latest (ancient, not quite pretty, but probably working if my memory is correct) version of my patches
>>
>> for the mdm9607 is available at [1], I will push the new revision after I get access to the workstation.
>>
>>
>> Konrad
>>
>>
>> [1] https://github.com/SoMainline/linux/commits/konrad/pinemodem
>>
>>
>>> Regards,
>>>     Sricharan
>>>
>>>   
>
> Thanks,
> Miquèl

Powered by blists - more mailing lists