| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220201183734.224756-3-ek5.chimenti@gmail.com>
Date: Tue, 1 Feb 2022 19:37:34 +0100
From: ektor5 <ek5.chimenti@...il.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Hans Verkuil <hverkuil-cisco@...all.nl>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Ettore Chimenti <ek5.chimenti@...il.com>,
linux-kernel@...r.kernel.org, linux-media@...r.kernel.org,
linuxfancy@...glegroups.com
Subject: [PATCH 2/2] media: cec: seco: add newlines in debug messages
From: Ettore Chimenti <ek5.chimenti@...il.com>
Newlines were missing in almost all regular and debug printk.
Signed-off-by: Ettore Chimenti <ek5.chimenti@...il.com>
---
drivers/media/cec/platform/seco/seco-cec.c | 54 +++++++++++-----------
1 file changed, 27 insertions(+), 27 deletions(-)
diff --git a/drivers/media/cec/platform/seco/seco-cec.c b/drivers/media/cec/platform/seco/seco-cec.c
index ae138cc253fd..78856a55e637 100644
--- a/drivers/media/cec/platform/seco/seco-cec.c
+++ b/drivers/media/cec/platform/seco/seco-cec.c
@@ -129,7 +129,7 @@ static int secocec_adap_enable(struct cec_adapter *adap, bool enable)
if (status)
goto err;
- dev_dbg(dev, "Device enabled");
+ dev_dbg(dev, "Device enabled\n");
} else {
/* Clear the status register */
status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
@@ -141,7 +141,7 @@ static int secocec_adap_enable(struct cec_adapter *adap, bool enable)
~SECOCEC_ENABLE_REG_1_CEC &
~SECOCEC_ENABLE_REG_1_IR);
- dev_dbg(dev, "Device disabled");
+ dev_dbg(dev, "Device disabled\n");
}
return 0;
@@ -264,12 +264,12 @@ static void secocec_rx_done(struct cec_adapter *adap, u16 status_val)
if (status_val & SECOCEC_STATUS_RX_OVERFLOW_MASK) {
/* NOTE: Untested, it also might not be necessary */
- dev_warn(dev, "Received more than 16 bytes. Discarding");
+ dev_warn(dev, "Received more than 16 bytes. Discarding\n");
flag_overflow = true;
}
if (status_val & SECOCEC_STATUS_RX_ERROR_MASK) {
- dev_warn(dev, "Message received with errors. Discarding");
+ dev_warn(dev, "Message received with errors. Discarding\n");
status = -EIO;
goto rxerr;
}
@@ -390,12 +390,12 @@ static int secocec_ir_probe(void *priv)
if (status != 0)
goto err;
- dev_dbg(dev, "IR enabled");
+ dev_dbg(dev, "IR enabled\n");
status = devm_rc_register_device(dev, cec->ir);
if (status) {
- dev_err(dev, "Failed to prepare input device");
+ dev_err(dev, "Failed to prepare input device\n");
cec->ir = NULL;
goto err;
}
@@ -408,7 +408,7 @@ static int secocec_ir_probe(void *priv)
smb_wr16(SECOCEC_ENABLE_REG_1,
val & ~SECOCEC_ENABLE_REG_1_IR);
- dev_dbg(dev, "IR disabled");
+ dev_dbg(dev, "IR disabled\n");
return status;
}
@@ -431,13 +431,13 @@ static int secocec_ir_rx(struct secocec_data *priv)
rc_keydown(cec->ir, RC_PROTO_RC5, RC_SCANCODE_RC5(addr, key), toggle);
- dev_dbg(dev, "IR key pressed: 0x%02x addr 0x%02x toggle 0x%02x", key,
+ dev_dbg(dev, "IR key pressed: 0x%02x addr 0x%02x toggle 0x%02x\n", key,
addr, toggle);
return 0;
err:
- dev_err(dev, "IR Receive message failed (%d)", status);
+ dev_err(dev, "IR Receive message failed (%d)\n", status);
return -EIO;
}
#else
@@ -497,7 +497,7 @@ static irqreturn_t secocec_irq_handler(int irq, void *priv)
return IRQ_HANDLED;
err:
- dev_err_once(dev, "IRQ: R/W SMBus operation failed (%d)", status);
+ dev_err_once(dev, "IRQ: R/W SMBus operation failed %d\n", status);
/* Reset status register */
val = SECOCEC_STATUS_REG_1_CEC | SECOCEC_STATUS_REG_1_IR;
@@ -553,16 +553,16 @@ static int secocec_acpi_probe(struct secocec_data *sdev)
gpio = devm_gpiod_get(dev, NULL, GPIOF_IN);
if (IS_ERR(gpio)) {
- dev_err(dev, "Cannot request interrupt gpio");
+ dev_err(dev, "Cannot request interrupt gpio\n");
return PTR_ERR(gpio);
}
irq = gpiod_to_irq(gpio);
if (irq < 0) {
- dev_err(dev, "Cannot find valid irq");
+ dev_err(dev, "Cannot find valid irq\n");
return -ENODEV;
}
- dev_dbg(dev, "irq-gpio is bound to IRQ %d", irq);
+ dev_dbg(dev, "irq-gpio is bound to IRQ %d\n", irq);
sdev->irq = irq;
@@ -590,7 +590,7 @@ static int secocec_probe(struct platform_device *pdev)
/* Request SMBus regions */
if (!request_muxed_region(BRA_SMB_BASE_ADDR, 7, "CEC00001")) {
- dev_err(dev, "Request memory region failed");
+ dev_err(dev, "Request memory region failed\n");
return -ENXIO;
}
@@ -598,14 +598,14 @@ static int secocec_probe(struct platform_device *pdev)
secocec->dev = dev;
if (!has_acpi_companion(dev)) {
- dev_dbg(dev, "Cannot find any ACPI companion");
+ dev_dbg(dev, "Cannot find any ACPI companion\n");
ret = -ENODEV;
goto err;
}
ret = secocec_acpi_probe(secocec);
if (ret) {
- dev_err(dev, "Cannot assign gpio to IRQ");
+ dev_err(dev, "Cannot assign gpio to IRQ\n");
ret = -ENODEV;
goto err;
}
@@ -613,11 +613,11 @@ static int secocec_probe(struct platform_device *pdev)
/* Firmware version check */
ret = smb_rd16(SECOCEC_VERSION, &val);
if (ret) {
- dev_err(dev, "Cannot check fw version");
+ dev_err(dev, "Cannot check fw version\n");
goto err;
}
if (val < SECOCEC_LATEST_FW) {
- dev_err(dev, "CEC Firmware not supported (v.%04x). Use ver > v.%04x",
+ dev_err(dev, "CEC Firmware not supported (v.%04x). Use ver > v.%04x\n",
val, SECOCEC_LATEST_FW);
ret = -EINVAL;
goto err;
@@ -631,7 +631,7 @@ static int secocec_probe(struct platform_device *pdev)
dev_name(&pdev->dev), secocec);
if (ret) {
- dev_err(dev, "Cannot request IRQ %d", secocec->irq);
+ dev_err(dev, "Cannot request IRQ %d\n", secocec->irq);
ret = -EIO;
goto err;
}
@@ -666,7 +666,7 @@ static int secocec_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, secocec);
- dev_dbg(dev, "Device registered");
+ dev_dbg(dev, "Device registered\n");
return ret;
@@ -691,14 +691,14 @@ static int secocec_remove(struct platform_device *pdev)
smb_wr16(SECOCEC_ENABLE_REG_1, val & ~SECOCEC_ENABLE_REG_1_IR);
- dev_dbg(&pdev->dev, "IR disabled");
+ dev_dbg(&pdev->dev, "IR disabled\n");
}
cec_notifier_cec_adap_unregister(secocec->notifier, secocec->cec_adap);
cec_unregister_adapter(secocec->cec_adap);
release_region(BRA_SMB_BASE_ADDR, 7);
- dev_dbg(&pdev->dev, "CEC device removed");
+ dev_dbg(&pdev->dev, "CEC device removed\n");
return 0;
}
@@ -709,7 +709,7 @@ static int secocec_suspend(struct device *dev)
int status;
u16 val;
- dev_dbg(dev, "Device going to suspend, disabling");
+ dev_dbg(dev, "Device going to suspend, disabling\n");
/* Clear the status register */
status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
@@ -733,7 +733,7 @@ static int secocec_suspend(struct device *dev)
return 0;
err:
- dev_err(dev, "Suspend failed (err: %d)", status);
+ dev_err(dev, "Suspend failed: %d\n", status);
return status;
}
@@ -742,7 +742,7 @@ static int secocec_resume(struct device *dev)
int status;
u16 val;
- dev_dbg(dev, "Resuming device from suspend");
+ dev_dbg(dev, "Resuming device from suspend\n");
/* Clear the status register */
status = smb_rd16(SECOCEC_STATUS_REG_1, &val);
@@ -762,12 +762,12 @@ static int secocec_resume(struct device *dev)
if (status)
goto err;
- dev_dbg(dev, "Device resumed from suspend");
+ dev_dbg(dev, "Device resumed from suspend\n");
return 0;
err:
- dev_err(dev, "Resume failed (err: %d)", status);
+ dev_err(dev, "Resume failed: %d\n", status);
return status;
}
--
2.17.1
Powered by blists - more mailing lists