Message-ID: <YfmBZvQ28y/Mh60J@smile.fi.intel.com>
Date:   Tue, 1 Feb 2022 20:52:22 +0200
From:   Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To:     Bjorn Helgaas <helgaas@...nel.org>
Cc:     Wolfram Sang <wsa@...nel.org>, Jean Delvare <jdelvare@...e.de>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Lee Jones <lee.jones@...aro.org>,
        Tan Jui Nee <jui.nee.tan@...el.com>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        Mika Westerberg <mika.westerberg@...ux.intel.com>,
        Hans de Goede <hdegoede@...hat.com>,
        Kate Hsuan <hpa@...hat.com>,
        Jonathan Yong <jonathan.yong@...el.com>,
        linux-kernel@...r.kernel.org, linux-i2c@...r.kernel.org,
        linux-pci@...r.kernel.org, linux-gpio@...r.kernel.org,
        platform-driver-x86@...r.kernel.org,
        Jean Delvare <jdelvare@...e.com>,
        Peter Tyser <ptyser@...-inc.com>,
        Andy Shevchenko <andy@...nel.org>,
        Linus Walleij <linus.walleij@...aro.org>,
        Mark Gross <markgross@...nel.org>,
        Henning Schild <henning.schild@...mens.com>
Subject: Re: [PATCH v3 3/8] platform/x86/intel: Add Primary to Sideband
 (P2SB) bridge support

On Tue, Feb 01, 2022 at 12:14:01PM -0600, Bjorn Helgaas wrote:
> On Fri, Jan 28, 2022 at 08:30:20PM +0200, Andy Shevchenko wrote:
> > On Fri, Jan 07, 2022 at 11:11:08AM -0600, Bjorn Helgaas wrote:
> > > On Fri, Jan 07, 2022 at 04:56:42PM +0200, Andy Shevchenko wrote:
> > 
> > ...
> > 
> > > > The unhide/hide back has been tested and we have already users
> > > > in the kernel (they have other issues though with the PCI rescan
> > > > lock, but it doesn't mean it wasn't ever tested).
> > > 
> > > Does the firmware team that hid this device sign off on the OS
> > > unhiding and using it?  How do we know that BIOS is not using the
> > > device?
> > 
> > BIOS might use the device via OperationRegion() in ACPI, but that
> > means that _CRS needs to have that region available. It seems not
> > the case.
> > 
> > And as far I as see in the internal documentation the hide / unhide
> > approach is not forbidden for OS side.
> 
> Unhiding is device-specific behavior, so generic PCI enumeration
> cannot use it.  We have to know there's a P2SB device at some address
> before we can safely do a config write to it.  PCI enumeration would
> learn there's a P2SB device at an address by reading a Vendor/Device
> ID.
> 
> > > My point is that the unhide is architecturally messed up.  The OS
> > > runs on the platform as described by ACPI.  Devices that cannot be
> > > enumerated are described in the ACPI namespace.
> > 
> > This device may or may not be _partially_ or _fully_ (due to being
> > multifunctional) described in ACPI. I agree, that ideally the
> > devices in question it has behind should be represented properly by
> > firmware.  However, the firmwares in the wild for selected products
> > / devices don't do that. We need to solve (work around) it in the
> > software.
> > 
> > This is already done for a few devices. This series consolidates
> > that and enables it for very known GPIO IPs.
> 
> Consolidating the code to unhide the device and size the BAR is fine.
> 
> I would prefer the PCI core to be involved as little as possible
> because we're violating some key assumptions and we could trip over
> those later.  We're assuming the existence of P2SB based on the fact
> that we found some *other* device, we're assuming firmware isn't using
> P2SB (may be true now, but impossible to verify), we're assuming the
> P2SB BAR contains a valid address that's not used elsewhere but also
> won't be assigned to anything.
> 
> > PCI core just provides a code that is very similar to what we need
> > here. Are you specifically suggesting that we have to copy'n'paste
> > that rather long function and maintain in parallel with PCI?
> 
> I think we're talking about __pci_read_base(), which is currently an
> internal PCI interface.  This series adds pci_bus_info/warn/etc(),

The patch that adds those macros is good on its own, if you think so...
I tried to submit it separately, but it was no response, so I don't know.

> reworks __pci_read_base() to operate on a struct pci_bus *, exports
> it, and uses it via #include <../../../pci/pci.h>.

Yes, which allows at least to have the same code, doing same things to be
in one copy in one place.

> __pci_read_base() is fairly long, but you apparently don't need all
> the functionality there because the core of the patch is this:
> 
>   -   pci_bus_read_config_dword(bus, spi, PCI_BASE_ADDRESS_0,
>   -                             &spi_base);
>   -   if (spi_base != ~0) {
>   -           res->start = spi_base & 0xfffffff0;
>   -           res->end = res->start + SPIBASE_APL_SZ - 1;
>   -   }
>   +   __pci_bus_read_base(bus, devfn, pci_bar_unknown, mem, PCI_BASE_ADDRESS_0, true)

You probably took the least pleasant (to me) example, because it's buggy in a
few ways:

- it misses 64-bit handling code
- it misses PCI rescan lock (in case PCI code decides to change addresses,
  previously ones will be invalid, while other drivers may still use that
  MMIO space
- it doesn't check if (for a new version Hans suggested me to add this check as
  it's done in one out of 3 cases)

It also useful to have some messages to be printed just in cases of errors
or success in a standard (PCI core provided) way.

> I don't think it's worth all the __pci_read_base() changes to do that.
> What if you made a library function that looks like this?
> 
>   int p2sb_bar(...)
>   {
>     pci_bus_write_config_byte(bus, devfn_p2sb, P2SBC_HIDE_BYTE, 0);
>     pci_bus_read_config_dword(bus, devfn, PCI_BASE_ADDRESS_0, &orig);
>     if (orig) {
>       pci_bus_write_config_dword(bus, devfn, PCI_BASE_ADDRESS_0, ~0);
>       pci_bus_read_config_dword(bus, devfn, PCI_BASE_ADDRESS_0, &val);
>       pci_bus_write_config_dword(bus, devfn, PCI_BASE_ADDRESS_0, orig);
>       res->start = orig;
>       res->end = res->start + (~val + 1);
>     }
>     pci_bus_write_config_byte(bus, devfn, P2SBC_HIDE_BYTE, P2SBC_HIDE_BIT);
>   }

It seems simple, but with the above mentioned adjustments, it will become
closer to the size of the original __pci_read_base().

-- 
With Best Regards,
Andy Shevchenko

Powered by blists - more mailing lists