[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Wed, 2 Feb 2022 13:23:41 -0800
From: Douglas Anderson <dianders@...omium.org>
To: Bjorn Andersson <bjorn.andersson@...aro.org>
Cc: pmaliset@...eaurora.org, mka@...omium.org,
quic_rjendra@...cinc.com,
Shaik Sajida Bhanu <sbhanu@...eaurora.org>,
kgodara@...eaurora.org, konrad.dybcio@...ainline.org,
Sankeerth Billakanti <quic_sbillaka@...cinc.com>,
sibis@...eaurora.org, swboyd@...omium.org,
Douglas Anderson <dianders@...omium.org>,
Andy Gross <agross@...nel.org>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v3 07/14] arm64: dts: qcom: sc7280: Add edp_out port and HPD lines
Like dp_out, we should have defined edp_out in sc7280.dtsi so we don't
need to do this in the board files.
Like dp_hot_plug_det, we should define edp_hot_plug_det in
sc7280.dtsi.
We should set the default pinctrl for edp_hot_plug_det in
sc7280.dtsi. NOTE: this is _unlike_ the dp_hot_plug_det. It is
reasonable that in some boards the dedicated DP Hot Plug Detect will
not be hooked up in favor of Type C mechanisms. This is unlike eDP
where the Hot Plug Detect line (which functions as "panel ready" in
eDP) is highly likely to be used by boards.
Signed-off-by: Douglas Anderson <dianders@...omium.org>
---
Changes in v3:
- ("Add edp_out port and HPD lines") new for v3.
arch/arm64/boot/dts/qcom/sc7280.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 4d5892411a38..3f9837921c17 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3010,6 +3010,8 @@ mdss_dsi_phy: phy@...4400 {
mdss_edp: edp@...0000 {
compatible = "qcom,sc7280-edp";
+ pinctrl-names = "default";
+ pinctrl-0 = <&edp_hot_plug_det>;
reg = <0 0xaea0000 0 0x200>,
<0 0xaea0200 0 0x200>,
@@ -3052,12 +3054,18 @@ mdss_edp: edp@...0000 {
ports {
#address-cells = <1>;
#size-cells = <0>;
+
port@0 {
reg = <0>;
edp_in: endpoint {
remote-endpoint = <&dpu_intf5_out>;
};
};
+
+ port@1 {
+ reg = <1>;
+ edp_out: endpoint { };
+ };
};
edp_opp_table: opp-table {
@@ -3277,6 +3285,11 @@ dp_hot_plug_det: dp-hot-plug-det {
bias-disable;
};
+ edp_hot_plug_det: edp-hot-plug-det {
+ pins = "gpio60";
+ function = "edp_hot";
+ };
+
pcie1_clkreq_n: pcie1-clkreq-n {
pins = "gpio79";
function = "pcie1_clkreqn";
--
2.35.0.rc2.247.g8bbb082509-goog
Powered by blists - more mailing lists