| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 2 Feb 2022 12:56:35 +0100
From: "H. Nikolaus Schaller" <hns@...delico.com>
To: Paul Cercueil <paul@...pouillou.net>
Cc: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Kees Cook <keescook@...omium.org>,
"Eric W. Biederman" <ebiederm@...ssion.com>,
Miquel Raynal <miquel.raynal@...tlin.com>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Neil Armstrong <narmstrong@...libre.com>,
Robert Foss <robert.foss@...aro.org>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Harry Wentland <harry.wentland@....com>,
Sam Ravnborg <sam@...nborg.org>,
Maxime Ripard <maxime@...no.tech>,
Hans Verkuil <hverkuil-cisco@...all.nl>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Paul Boddie <paul@...die.org.uk>,
Andrzej Hajda <andrzej.hajda@...el.com>,
Kieran Bingham <kieran.bingham+renesas@...asonboard.com>,
devicetree@...r.kernel.org, linux-mips@...r.kernel.org,
linux-kernel@...r.kernel.org, letux-kernel@...nphoenux.org,
Jonas Karlman <jonas@...boo.se>,
dri-devel@...ts.freedesktop.org,
Ezequiel Garcia <ezequiel@...labora.com>
Subject: Re: [PATCH v12 2/9] drm/ingenic: Add support for JZ4780 and HDMI
output
Hi Paul,
thanks for the reviews. Looks as if we are close to making a goal.
> Am 02.02.2022 um 11:23 schrieb Paul Cercueil <paul@...pouillou.net>:
>
> Hi Nikolaus,
>
> Le lun., janv. 31 2022 at 13:26:48 +0100, H. Nikolaus Schaller <hns@...delico.com> a écrit :
>> From: Paul Boddie <paul@...die.org.uk>
>> Add support for the LCD controller present on JZ4780 SoCs.
>> This SoC uses 8-byte descriptors which extend the current
>> 4-byte descriptors used for other Ingenic SoCs.
>> Tested on MIPS Creator CI20 board.
>> Signed-off-by: Paul Boddie <paul@...die.org.uk>
>> Signed-off-by: Ezequiel Garcia <ezequiel@...labora.com>
>> Signed-off-by: H. Nikolaus Schaller <hns@...delico.com>
>> ---
>> drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 61 ++++++++++++++++++++++-
>> drivers/gpu/drm/ingenic/ingenic-drm.h | 38 ++++++++++++++
>> 2 files changed, 98 insertions(+), 1 deletion(-)
>> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> index 9c60fc4605e4b..ccdb9eedd9247 100644
>> --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> @@ -6,6 +6,7 @@
>> #include "ingenic-drm.h"
>> +#include <linux/bitfield.h>
>> #include <linux/component.h>
>> #include <linux/clk.h>
>> #include <linux/dma-mapping.h>
>> @@ -49,6 +50,11 @@ struct ingenic_dma_hwdesc {
>> u32 addr;
>> u32 id;
>> u32 cmd;
>> + /* extended hw descriptor for jz4780 */
>> + u32 offsize;
>> + u32 pagewidth;
>> + u32 cpos;
>> + u32 dessize;
>> } __aligned(16);
>> struct ingenic_dma_hwdescs {
>> @@ -59,7 +65,9 @@ struct ingenic_dma_hwdescs {
>> struct jz_soc_info {
>> bool needs_dev_clk;
>> bool has_osd;
>> + bool has_alpha;
>> bool map_noncoherent;
>> + bool use_extended_hwdesc;
>> unsigned int max_width, max_height;
>> const u32 *formats_f0, *formats_f1;
>> unsigned int num_formats_f0, num_formats_f1;
>> @@ -446,6 +454,9 @@ static int ingenic_drm_plane_atomic_check(struct drm_plane *plane,
>> if (!crtc)
>> return 0;
>> + if (plane == &priv->f0)
>> + return -EINVAL;
>
> This will break JZ4725B -> JZ4770 SoCs, the f0 plane is perfectly usable there.
Hm. I think it was your request/proposal to add this [1]?
What I have forgotten is why the f0 plane should not be usable for jz4780.
BR and thanks,
Nikolaus
[1] end of https://patchwork.kernel.org/project/dri-devel/patch/2c7d0aa7d3ef480ebb996d37c27cbaa6f722728b.1633436959.git.hns@goldelico.com/#24578683
>
> Cheers,
> -Paul
>
>> +
>> crtc_state = drm_atomic_get_existing_crtc_state(state,
>> crtc);
>> if (WARN_ON(!crtc_state))
>> @@ -662,6 +673,33 @@ static void ingenic_drm_plane_atomic_update(struct drm_plane *plane,
>> hwdesc->cmd = JZ_LCD_CMD_EOF_IRQ | (width * height * cpp / 4);
>> hwdesc->next = dma_hwdesc_addr(priv, next_id);
>> + if (priv->soc_info->use_extended_hwdesc) {
>> + hwdesc->cmd |= JZ_LCD_CMD_FRM_ENABLE;
>> +
>> + /* Extended 8-byte descriptor */
>> + hwdesc->cpos = 0;
>> + hwdesc->offsize = 0;
>> + hwdesc->pagewidth = 0;
>> +
>> + switch (newstate->fb->format->format) {
>> + case DRM_FORMAT_XRGB1555:
>> + hwdesc->cpos |= JZ_LCD_CPOS_RGB555;
>> + fallthrough;
>> + case DRM_FORMAT_RGB565:
>> + hwdesc->cpos |= JZ_LCD_CPOS_BPP_15_16;
>> + break;
>> + case DRM_FORMAT_XRGB8888:
>> + hwdesc->cpos |= JZ_LCD_CPOS_BPP_18_24;
>> + break;
>> + }
>> + hwdesc->cpos |= (JZ_LCD_CPOS_COEFFICIENT_1 <<
>> + JZ_LCD_CPOS_COEFFICIENT_OFFSET);
>> + hwdesc->dessize =
>> + (0xff << JZ_LCD_DESSIZE_ALPHA_OFFSET) |
>> + FIELD_PREP(JZ_LCD_DESSIZE_HEIGHT_MASK, height - 1) |
>> + FIELD_PREP(JZ_LCD_DESSIZE_WIDTH_MASK, width - 1);
>> + }
>> +
>> if (drm_atomic_crtc_needs_modeset(crtc_state)) {
>> fourcc = newstate->fb->format->format;
>> @@ -693,6 +731,9 @@ static void ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
>> | JZ_LCD_CFG_SPL_DISABLE | JZ_LCD_CFG_REV_DISABLE;
>> }
>> + if (priv->soc_info->use_extended_hwdesc)
>> + cfg |= JZ_LCD_CFG_DESCRIPTOR_8;
>> +
>> if (mode->flags & DRM_MODE_FLAG_NHSYNC)
>> cfg |= JZ_LCD_CFG_HSYNC_ACTIVE_LOW;
>> if (mode->flags & DRM_MODE_FLAG_NVSYNC)
>> @@ -1015,6 +1056,7 @@ static int ingenic_drm_bind(struct device *dev, bool has_components)
>> long parent_rate;
>> unsigned int i, clone_mask = 0;
>> int ret, irq;
>> + u32 osdc = 0;
>> soc_info = of_device_get_match_data(dev);
>> if (!soc_info) {
>> @@ -1272,7 +1314,10 @@ static int ingenic_drm_bind(struct device *dev, bool has_components)
>> /* Enable OSD if available */
>> if (soc_info->has_osd)
>> - regmap_write(priv->map, JZ_REG_LCD_OSDC, JZ_LCD_OSDC_OSDEN);
>> + osdc |= JZ_LCD_OSDC_OSDEN;
>> + if (soc_info->has_alpha)
>> + osdc |= JZ_LCD_OSDC_ALPHAEN;
>> + regmap_write(priv->map, JZ_REG_LCD_OSDC, osdc);
>> mutex_init(&priv->clk_mutex);
>> priv->clock_nb.notifier_call = ingenic_drm_update_pixclk;
>> @@ -1468,10 +1513,24 @@ static const struct jz_soc_info jz4770_soc_info = {
>> .num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
>> };
>> +static const struct jz_soc_info jz4780_soc_info = {
>> + .needs_dev_clk = true,
>> + .has_osd = true,
>> + .has_alpha = true,
>> + .use_extended_hwdesc = true,
>> + .max_width = 4096,
>> + .max_height = 2048,
>> + .formats_f1 = jz4770_formats_f1,
>> + .num_formats_f1 = ARRAY_SIZE(jz4770_formats_f1),
>> + .formats_f0 = jz4770_formats_f0,
>> + .num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
>> +};
>> +
>> static const struct of_device_id ingenic_drm_of_match[] = {
>> { .compatible = "ingenic,jz4740-lcd", .data = &jz4740_soc_info },
>> { .compatible = "ingenic,jz4725b-lcd", .data = &jz4725b_soc_info },
>> { .compatible = "ingenic,jz4770-lcd", .data = &jz4770_soc_info },
>> + { .compatible = "ingenic,jz4780-lcd", .data = &jz4780_soc_info },
>> { /* sentinel */ },
>> };
>> MODULE_DEVICE_TABLE(of, ingenic_drm_of_match);
>> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm.h b/drivers/gpu/drm/ingenic/ingenic-drm.h
>> index 22654ac1dde1c..cb1d09b625881 100644
>> --- a/drivers/gpu/drm/ingenic/ingenic-drm.h
>> +++ b/drivers/gpu/drm/ingenic/ingenic-drm.h
>> @@ -44,8 +44,11 @@
>> #define JZ_REG_LCD_XYP1 0x124
>> #define JZ_REG_LCD_SIZE0 0x128
>> #define JZ_REG_LCD_SIZE1 0x12c
>> +#define JZ_REG_LCD_PCFG 0x2c0
>> #define JZ_LCD_CFG_SLCD BIT(31)
>> +#define JZ_LCD_CFG_DESCRIPTOR_8 BIT(28)
>> +#define JZ_LCD_CFG_RECOVER_FIFO_UNDERRUN BIT(25)
>> #define JZ_LCD_CFG_PS_DISABLE BIT(23)
>> #define JZ_LCD_CFG_CLS_DISABLE BIT(22)
>> #define JZ_LCD_CFG_SPL_DISABLE BIT(21)
>> @@ -63,6 +66,7 @@
>> #define JZ_LCD_CFG_DE_ACTIVE_LOW BIT(9)
>> #define JZ_LCD_CFG_VSYNC_ACTIVE_LOW BIT(8)
>> #define JZ_LCD_CFG_18_BIT BIT(7)
>> +#define JZ_LCD_CFG_24_BIT BIT(6)
>> #define JZ_LCD_CFG_PDW (BIT(5) | BIT(4))
>> #define JZ_LCD_CFG_MODE_GENERIC_16BIT 0
>> @@ -132,6 +136,7 @@
>> #define JZ_LCD_CMD_SOF_IRQ BIT(31)
>> #define JZ_LCD_CMD_EOF_IRQ BIT(30)
>> #define JZ_LCD_CMD_ENABLE_PAL BIT(28)
>> +#define JZ_LCD_CMD_FRM_ENABLE BIT(26)
>> #define JZ_LCD_SYNC_MASK 0x3ff
>> @@ -153,6 +158,7 @@
>> #define JZ_LCD_RGBC_EVEN_BGR (0x5 << 0)
>> #define JZ_LCD_OSDC_OSDEN BIT(0)
>> +#define JZ_LCD_OSDC_ALPHAEN BIT(2)
>> #define JZ_LCD_OSDC_F0EN BIT(3)
>> #define JZ_LCD_OSDC_F1EN BIT(4)
>> @@ -176,6 +182,38 @@
>> #define JZ_LCD_SIZE01_WIDTH_LSB 0
>> #define JZ_LCD_SIZE01_HEIGHT_LSB 16
>> +#define JZ_LCD_DESSIZE_ALPHA_OFFSET 24
>> +#define JZ_LCD_DESSIZE_HEIGHT_MASK GENMASK(23, 12)
>> +#define JZ_LCD_DESSIZE_WIDTH_MASK GENMASK(11, 0)
>> +
>> +#define JZ_LCD_CPOS_BPP_15_16 (4 << 27)
>> +#define JZ_LCD_CPOS_BPP_18_24 (5 << 27)
>> +#define JZ_LCD_CPOS_BPP_30 (7 << 27)
>> +#define JZ_LCD_CPOS_RGB555 BIT(30)
>> +#define JZ_LCD_CPOS_PREMULTIPLY_LCD BIT(26)
>> +#define JZ_LCD_CPOS_COEFFICIENT_OFFSET 24
>> +#define JZ_LCD_CPOS_COEFFICIENT_0 0
>> +#define JZ_LCD_CPOS_COEFFICIENT_1 1
>> +#define JZ_LCD_CPOS_COEFFICIENT_ALPHA1 2
>> +#define JZ_LCD_CPOS_COEFFICIENT_1_ALPHA1 3
>> +
>> +#define JZ_LCD_RGBC_RGB_PADDING BIT(15)
>> +#define JZ_LCD_RGBC_RGB_PADDING_FIRST BIT(14)
>> +#define JZ_LCD_RGBC_422 BIT(8)
>> +#define JZ_LCD_RGBC_RGB_FORMAT_ENABLE BIT(7)
>> +
>> +#define JZ_LCD_PCFG_PRI_MODE BIT(31)
>> +#define JZ_LCD_PCFG_HP_BST_4 (0 << 28)
>> +#define JZ_LCD_PCFG_HP_BST_8 (1 << 28)
>> +#define JZ_LCD_PCFG_HP_BST_16 (2 << 28)
>> +#define JZ_LCD_PCFG_HP_BST_32 (3 << 28)
>> +#define JZ_LCD_PCFG_HP_BST_64 (4 << 28)
>> +#define JZ_LCD_PCFG_HP_BST_16_CONT (5 << 28)
>> +#define JZ_LCD_PCFG_HP_BST_DISABLE (7 << 28)
>> +#define JZ_LCD_PCFG_THRESHOLD2_OFFSET 18
>> +#define JZ_LCD_PCFG_THRESHOLD1_OFFSET 9
>> +#define JZ_LCD_PCFG_THRESHOLD0_OFFSET 0
>> +
>> struct device;
>> struct drm_plane;
>> struct drm_plane_state;
>> --
>> 2.33.0
>
>
Powered by blists - more mailing lists