linux-kernel - [PATCH 2/2] serial: stm32: enable / disable wake irqs for mcrtl

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220203171644.12231-3-erwan.leray@foss.st.com>
Date:   Thu, 3 Feb 2022 18:16:44 +0100
From:   Erwan Le Ray <erwan.leray@...s.st.com>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>
CC:     Jiri Slaby <jirislaby@...nel.org>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Alexandre Torgue <alexandre.torgue@...s.st.com>,
        Gerald Baeza <gerald.baeza@...com>,
        Erwan Le Ray <erwan.leray@...s.st.com>,
        Valentin Caron <valentin.caron@...s.st.com>,
        <linux-serial@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>
Subject: [PATCH 2/2] serial: stm32: enable / disable wake irqs for mcrtl_gpio wakeup sources

Enable mctrl_gpio wake_irq if device_may_wakeup when usart is suspended,
and disable mctrl_gpios wake_irq if device_may_wakeup when usart is
resumed.

Signed-off-by: Erwan Le Ray <erwan.leray@...s.st.com>

diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 3244e7f6818c..df86c53e62a7 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -1708,6 +1708,7 @@ static int __maybe_unused stm32_usart_serial_en_wakeup(struct uart_port *port,
 	if (enable) {
 		stm32_usart_set_bits(port, ofs->cr1, USART_CR1_UESM);
 		stm32_usart_set_bits(port, ofs->cr3, USART_CR3_WUFIE);
+		mctrl_gpio_enable_irq_wake(stm32_port->gpios);
 
 		/*
 		 * When DMA is used for reception, it must be disabled before
@@ -1734,7 +1735,7 @@ static int __maybe_unused stm32_usart_serial_en_wakeup(struct uart_port *port,
 			if (ret)
 				return ret;
 		}
-
+		mctrl_gpio_disable_irq_wake(stm32_port->gpios);
 		stm32_usart_clr_bits(port, ofs->cr1, USART_CR1_UESM);
 		stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_WUFIE);
 	}
-- 
2.17.1