[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220204091917.455414849@linuxfoundation.org>
Date: Fri, 4 Feb 2022 10:22:15 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Jonathan McDowell <noodles@...th.li>,
"Russell King (Oracle)" <rmk+kernel@...linux.org.uk>,
"David S. Miller" <davem@...emloft.net>
Subject: [PATCH 5.16 08/43] net: phy: Fix qca8081 with speeds lower than 2.5Gb/s
From: Jonathan McDowell <noodles@...th.li>
commit 881cc731df6af99a21622e9be25a23b81adcd10b upstream.
A typo in qca808x_read_status means we try to set SMII mode on the port
rather than SGMII when the link speed is not 2.5Gb/s. This results in no
traffic due to the mismatch in configuration between the phy and the
mac.
v2:
Only change interface mode when the link is up
Fixes: 79c7bc0521545 ("net: phy: add qca8081 read_status")
Cc: stable@...r.kernel.org
Signed-off-by: Jonathan McDowell <noodles@...th.li>
Reviewed-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/net/phy/at803x.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -1688,19 +1688,19 @@ static int qca808x_read_status(struct ph
if (ret < 0)
return ret;
- if (phydev->link && phydev->speed == SPEED_2500)
- phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
- else
- phydev->interface = PHY_INTERFACE_MODE_SMII;
-
- /* generate seed as a lower random value to make PHY linked as SLAVE easily,
- * except for master/slave configuration fault detected.
- * the reason for not putting this code into the function link_change_notify is
- * the corner case where the link partner is also the qca8081 PHY and the seed
- * value is configured as the same value, the link can't be up and no link change
- * occurs.
- */
- if (!phydev->link) {
+ if (phydev->link) {
+ if (phydev->speed == SPEED_2500)
+ phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
+ else
+ phydev->interface = PHY_INTERFACE_MODE_SGMII;
+ } else {
+ /* generate seed as a lower random value to make PHY linked as SLAVE easily,
+ * except for master/slave configuration fault detected.
+ * the reason for not putting this code into the function link_change_notify is
+ * the corner case where the link partner is also the qca8081 PHY and the seed
+ * value is configured as the same value, the link can't be up and no link change
+ * occurs.
+ */
if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR) {
qca808x_phy_ms_seed_enable(phydev, false);
} else {
Powered by blists - more mailing lists