linux-kernel - [PATCH 5.16 30/43] i40e: Fix reset bw limit when DCB enabled with 1 TC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220204091918.148878584@linuxfoundation.org>
Date:   Fri,  4 Feb 2022 10:22:37 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org,
        Sylwester Dziedziuch <sylwesterx.dziedziuch@...el.com>,
        Jedrzej Jagielski <jedrzej.jagielski@...el.com>,
        Alexander Lobakin <alexandr.lobakin@...el.com>,
        Imam Hassan Reza Biswas <imam.hassan.reza.biswas@...el.com>,
        Tony Nguyen <anthony.l.nguyen@...el.com>
Subject: [PATCH 5.16 30/43] i40e: Fix reset bw limit when DCB enabled with 1 TC

From: Jedrzej Jagielski <jedrzej.jagielski@...el.com>

commit 3d2504663c41104b4359a15f35670cfa82de1bbf upstream.

There was an AQ error I40E_AQ_RC_EINVAL when trying
to reset bw limit as part of bw allocation setup.
This was caused by trying to reset bw limit with
DCB enabled. Bw limit should not be reset when
DCB is enabled. The code was relying on the pf->flags
to check if DCB is enabled but if only 1 TC is available
this flag will not be set even though DCB is enabled.
Add a check for number of TC and if it is 1
don't try to reset bw limit even if pf->flags shows
DCB as disabled.

Fixes: fa38e30ac73f ("i40e: Fix for Tx timeouts when interface is brought up if DCB is enabled")
Suggested-by: Alexander Lobakin <alexandr.lobakin@...el.com> # Flatten the condition
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@...el.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@...el.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@...el.com>
Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@...el.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@...el.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -5372,7 +5372,15 @@ static int i40e_vsi_configure_bw_alloc(s
 	/* There is no need to reset BW when mqprio mode is on.  */
 	if (pf->flags & I40E_FLAG_TC_MQPRIO)
 		return 0;
-	if (!vsi->mqprio_qopt.qopt.hw && !(pf->flags & I40E_FLAG_DCB_ENABLED)) {
+
+	if (!vsi->mqprio_qopt.qopt.hw) {
+		if (pf->flags & I40E_FLAG_DCB_ENABLED)
+			goto skip_reset;
+
+		if (IS_ENABLED(CONFIG_I40E_DCB) &&
+		    i40e_dcb_hw_get_num_tc(&pf->hw) == 1)
+			goto skip_reset;
+
 		ret = i40e_set_bw_limit(vsi, vsi->seid, 0);
 		if (ret)
 			dev_info(&pf->pdev->dev,
@@ -5380,6 +5388,8 @@ static int i40e_vsi_configure_bw_alloc(s
 				 vsi->seid);
 		return ret;
 	}
+
+skip_reset:
 	memset(&bw_data, 0, sizeof(bw_data));
 	bw_data.tc_valid_bits = enabled_tc;
 	for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++)