| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <573f8647-7479-3561-cd88-035b4db33e36@linux.ibm.com>
Date: Mon, 7 Feb 2022 14:39:31 -0500
From: Tony Krowiak <akrowiak@...ux.ibm.com>
To: Halil Pasic <pasic@...ux.ibm.com>
Cc: linux-s390@...r.kernel.org, linux-kernel@...r.kernel.org,
kvm@...r.kernel.org, jjherne@...ux.ibm.com, freude@...ux.ibm.com,
borntraeger@...ibm.com, cohuck@...hat.com, mjrosato@...ux.ibm.com,
alex.williamson@...hat.com, kwankhede@...dia.com,
fiuczy@...ux.ibm.com
Subject: Re: [PATCH v17 14/15] s390/ap: notify drivers on config changed and
scan complete callbacks
On 2/4/22 05:43, Halil Pasic wrote:
> On Thu, 21 Oct 2021 11:23:31 -0400
> Tony Krowiak <akrowiak@...ux.ibm.com> wrote:
>
>> This patch introduces an extension to the ap bus to notify device drivers
>> when the host AP configuration changes - i.e., adapters, domains or
>> control domains are added or removed. When an adapter or domain is added to
>> the host's AP configuration, the AP bus will create the associated queue
>> devices in the linux sysfs device model. Each new type 10 (i.e., CEX4) or
>> newer queue device with an APQN that is not reserved for the default device
>> driver will get bound to the vfio_ap device driver. Likewise, whan an
>> adapter or domain is removed from the host's AP configuration, the AP bus
>> will remove the associated queue devices from the sysfs device model. Each
>> of the queues that is bound to the vfio_ap device driver will get unbound.
>>
>> With the introduction of hot plug support, binding or unbinding of a
>> queue device will result in plugging or unplugging one or more queues from
>> a guest that is using the queue. If there are multiple changes to the
>> host's AP configuration, it could result in the probe and remove callbacks
>> getting invoked multiple times. Each time queues are plugged into or
>> unplugged from a guest, the guest's VCPUs must be taken out of SIE.
>> If this occurs multiple times due to changes in the host's AP
>> configuration, that can have an undesirable negative affect on the guest's
>> performance.
>>
>> To alleviate this problem, this patch introduces two new callbacks: one to
>> notify the vfio_ap device driver when the AP bus scan routine detects a
>> change to the host's AP configuration; and, one to notify the driver when
>> the AP bus is done scanning. This will allow the vfio_ap driver to do
>> bulk processing of all affected adapters, domains and control domains for
>> affected guests rather than plugging or unplugging them one at a time when
>> the probe or remove callback is invoked. The two new callbacks are:
>>
>> void (*on_config_changed)(struct ap_config_info *new_config_info,
>> struct ap_config_info *old_config_info);
>>
>> This callback is invoked at the start of the AP bus scan
>> function when it determines that the host AP configuration information
>> has changed since the previous scan. This is done by storing
>> an old and current QCI info struct and comparing them. If there is any
>> difference, the callback is invoked.
>>
>> The vfio_ap device driver registers a callback function for this callback
>> that performs the following operations:
>>
>> 1. Unplugs the adapters, domains and control domains removed from the
>> host's AP configuration from the guests to which they are
>> assigned in a single operation.
>>
>> 2. Disconnects the links between each queue structure representing a
>> queue that was unplugged from the structure representing
>> the mediated device to which the queue is assigned. Thus, when the
>> vfio_ap device driver's remove callback is invoked, the unplugging of
>> the queue from the guest and the unlinking of the queue structure from
>> the mediated device structure will be bypassed because the queues and
>> control domains will have already been unplugged in bulk.
>>
>> 3. Stores bitmaps identifying the adapters, domains and control domains
>> added to the host's AP configuration with the structure representing
>> the mediated device. When the vfio_ap device driver's probe callback is
>> subsequently invoked, the probe function will recognize that the
>> queue is being probed due to a change in the host's AP configuration
>> and the plugging of the queue into the guest will be bypassed.
>>
>> void (*on_scan_complete)(struct ap_config_info *new_config_info,
>> struct ap_config_info *old_config_info);
>>
>> The on_scan_complete callback is invoked after the ap bus scan is
>> completed if the host AP configuration data has changed. The vfio_ap
>> device driver registers a callback function for this callback that hot
>> plugs each queue and control domain added to the AP configuration for each
>> guest using them in a single hot plug operation.
>>
>> Signed-off-by: Harald Freudenberger <freude@...ux.ibm.com>
>> [akrowiak@...ux.ibm.com: implemented callback functions in vfio_ap driver]
>> Signed-off-by: Tony Krowiak <akrowiak@...ux.ibm.com>
>> ---
>> drivers/s390/crypto/ap_bus.c | 81 ++++++-
>> drivers/s390/crypto/ap_bus.h | 12 +
>> drivers/s390/crypto/vfio_ap_drv.c | 4 +-
>> drivers/s390/crypto/vfio_ap_ops.c | 332 ++++++++++++++++++++++++--
>> drivers/s390/crypto/vfio_ap_private.h | 23 +-
>> 5 files changed, 429 insertions(+), 23 deletions(-)
>>
>> diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c
>> index 15886610f61a..b97149d02da6 100644
>> --- a/drivers/s390/crypto/ap_bus.c
>> +++ b/drivers/s390/crypto/ap_bus.c
>> @@ -88,6 +88,7 @@ static atomic64_t ap_bindings_complete_count = ATOMIC64_INIT(0);
>> static DECLARE_COMPLETION(ap_init_apqn_bindings_complete);
>>
>> static struct ap_config_info *ap_qci_info;
>> +static struct ap_config_info *ap_qci_info_old;
>>
>> /*
>> * AP bus related debug feature things.
>> @@ -225,9 +226,14 @@ static void __init ap_init_qci_info(void)
>> ap_qci_info = kzalloc(sizeof(*ap_qci_info), GFP_KERNEL);
>> if (!ap_qci_info)
>> return;
>> + ap_qci_info_old = kzalloc(sizeof(*ap_qci_info_old), GFP_KERNEL);
>> + if (!ap_qci_info_old)
>> + return;
>> if (ap_fetch_qci_info(ap_qci_info) != 0) {
>> kfree(ap_qci_info);
>> + kfree(ap_qci_info_old);
>> ap_qci_info = NULL;
>> + ap_qci_info_old = NULL;
>> return;
>> }
>> AP_DBF_INFO("%s successful fetched initial qci info\n", __func__);
>> @@ -244,6 +250,8 @@ static void __init ap_init_qci_info(void)
>> __func__, ap_max_domain_id);
>> }
>> }
>> +
>> + memcpy(ap_qci_info_old, ap_qci_info, sizeof(*ap_qci_info));
>> }
>>
>> /*
>> @@ -1635,6 +1643,49 @@ static int __match_queue_device_with_queue_id(struct device *dev, const void *da
>> && AP_QID_QUEUE(to_ap_queue(dev)->qid) == (int)(long) data;
>> }
>>
>> +/* Helper function for notify_config_changed */
>> +static int __drv_notify_config_changed(struct device_driver *drv, void *data)
>> +{
>> + struct ap_driver *ap_drv = to_ap_drv(drv);
>> +
>> + if (try_module_get(drv->owner)) {
>> + if (ap_drv->on_config_changed)
>> + ap_drv->on_config_changed(ap_qci_info, ap_qci_info_old);
>> + module_put(drv->owner);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +/* Notify all drivers about an qci config change */
>> +static inline void notify_config_changed(void)
>> +{
>> + bus_for_each_drv(&ap_bus_type, NULL, NULL,
>> + __drv_notify_config_changed);
>> +}
>> +
>> +/* Helper function for notify_scan_complete */
>> +static int __drv_notify_scan_complete(struct device_driver *drv, void *data)
>> +{
>> + struct ap_driver *ap_drv = to_ap_drv(drv);
>> +
>> + if (try_module_get(drv->owner)) {
>> + if (ap_drv->on_scan_complete)
>> + ap_drv->on_scan_complete(ap_qci_info,
>> + ap_qci_info_old);
>> + module_put(drv->owner);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +/* Notify all drivers about bus scan complete */
>> +static inline void notify_scan_complete(void)
>> +{
>> + bus_for_each_drv(&ap_bus_type, NULL, NULL,
>> + __drv_notify_scan_complete);
>> +}
>> +
>> /*
>> * Helper function for ap_scan_bus().
>> * Remove card device and associated queue devices.
>> @@ -1923,6 +1974,25 @@ static inline void ap_scan_adapter(int ap)
>> put_device(&ac->ap_dev.device);
>> }
>>
>> +/**
>> + * ap_get_configuration - get the host AP configuration
>> + *
>> + * Stores the host AP configuration information returned from the previous call
>> + * to Query Configuration Information (QCI), then retrieves and stores the
>> + * current AP configuration returned from QCI.
>> + *
>> + * Return: true if the host AP configuration changed between calls to QCI;
>> + * otherwise, return false.
>> + */
>> +static bool ap_get_configuration(void)
>> +{
>> + memcpy(ap_qci_info_old, ap_qci_info, sizeof(*ap_qci_info));
>> + ap_fetch_qci_info(ap_qci_info);
>> +
>> + return memcmp(ap_qci_info, ap_qci_info_old,
>> + sizeof(struct ap_config_info)) != 0;
>> +}
>> +
>> /**
>> * ap_scan_bus(): Scan the AP bus for new devices
>> * Runs periodically, workqueue timer (ap_config_time)
>> @@ -1930,9 +2000,12 @@ static inline void ap_scan_adapter(int ap)
>> */
>> static void ap_scan_bus(struct work_struct *unused)
>> {
>> - int ap;
>> + int ap, config_changed = 0;
>>
>> - ap_fetch_qci_info(ap_qci_info);
>> + /* config change notify */
>> + config_changed = ap_get_configuration();
>> + if (config_changed)
>> + notify_config_changed();
>> ap_select_domain();
>>
>> AP_DBF_DBG("%s running\n", __func__);
>> @@ -1941,6 +2014,10 @@ static void ap_scan_bus(struct work_struct *unused)
>> for (ap = 0; ap <= ap_max_adapter_id; ap++)
>> ap_scan_adapter(ap);
>>
>> + /* scan complete notify */
>> + if (config_changed)
>> + notify_scan_complete();
>> +
>> /* check if there is at least one queue available with default domain */
>> if (ap_domain_index >= 0) {
>> struct device *dev =
>> diff --git a/drivers/s390/crypto/ap_bus.h b/drivers/s390/crypto/ap_bus.h
>> index 67c1bef60ad5..4de062ea6b76 100644
>> --- a/drivers/s390/crypto/ap_bus.h
>> +++ b/drivers/s390/crypto/ap_bus.h
>> @@ -143,6 +143,18 @@ struct ap_driver {
>> int (*probe)(struct ap_device *);
>> void (*remove)(struct ap_device *);
>> int (*in_use)(unsigned long *apm, unsigned long *aqm);
>> + /*
>> + * Called at the start of the ap bus scan function when
>> + * the crypto config information (qci) has changed.
>> + */
>> + void (*on_config_changed)(struct ap_config_info *new_config_info,
>> + struct ap_config_info *old_config_info);
>> + /*
>> + * Called at the end of the ap bus scan function when
>> + * the crypto config information (qci) has changed.
>> + */
>> + void (*on_scan_complete)(struct ap_config_info *new_config_info,
>> + struct ap_config_info *old_config_info);
>> };
>>
>> #define to_ap_drv(x) container_of((x), struct ap_driver, driver)
>> diff --git a/drivers/s390/crypto/vfio_ap_drv.c b/drivers/s390/crypto/vfio_ap_drv.c
>> index df7528dcf6ed..5edd45d4d2fc 100644
>> --- a/drivers/s390/crypto/vfio_ap_drv.c
>> +++ b/drivers/s390/crypto/vfio_ap_drv.c
>> @@ -45,6 +45,8 @@ static struct ap_driver vfio_ap_drv = {
>> .probe = vfio_ap_mdev_probe_queue,
>> .remove = vfio_ap_mdev_remove_queue,
>> .in_use = vfio_ap_mdev_resource_in_use,
>> + .on_config_changed = vfio_ap_on_cfg_changed,
>> + .on_scan_complete = vfio_ap_on_scan_complete,
>> .ids = ap_queue_ids,
>> };
>>
>> @@ -92,7 +94,7 @@ static int vfio_ap_matrix_dev_create(void)
>>
>> /* Fill in config info via PQAP(QCI), if available */
>> if (test_facility(12)) {
>> - ret = ap_qci(&matrix_dev->info);
>> + ret = ap_qci(&matrix_dev->config_info);
>> if (ret)
>> goto matrix_alloc_err;
>> }
>> diff --git a/drivers/s390/crypto/vfio_ap_ops.c b/drivers/s390/crypto/vfio_ap_ops.c
>> index 8075080ef2dd..cedf491c0df4 100644
>> --- a/drivers/s390/crypto/vfio_ap_ops.c
>> +++ b/drivers/s390/crypto/vfio_ap_ops.c
>> @@ -330,7 +330,7 @@ static bool vfio_ap_mdev_filter_cdoms(struct ap_matrix_mdev *matrix_mdev)
>>
>> bitmap_copy(shadow_adm, matrix_mdev->shadow_apcb.adm, AP_DOMAINS);
>> bitmap_and(matrix_mdev->shadow_apcb.adm, matrix_mdev->matrix.adm,
>> - (unsigned long *)matrix_dev->info.adm, AP_DOMAINS);
>> + (unsigned long *)matrix_dev->config_info.adm, AP_DOMAINS);
>>
>> return !bitmap_equal(shadow_adm, matrix_mdev->shadow_apcb.adm,
>> AP_DOMAINS);
>> @@ -349,19 +349,15 @@ static bool vfio_ap_mdev_filter_cdoms(struct ap_matrix_mdev *matrix_mdev)
>> */
>> static bool vfio_ap_mdev_filter_matrix(struct ap_matrix_mdev *matrix_mdev)
>> {
>> - int ret;
>> unsigned long apid, apqi, apqn;
>> DECLARE_BITMAP(shadow_apm, AP_DEVICES);
>> DECLARE_BITMAP(shadow_aqm, AP_DOMAINS);
>> struct vfio_ap_queue *q;
>>
>> - ret = ap_qci(&matrix_dev->info);
>> - if (ret)
>> - return false;
>> -
>> bitmap_copy(shadow_apm, matrix_mdev->shadow_apcb.apm, AP_DEVICES);
>> bitmap_copy(shadow_aqm, matrix_mdev->shadow_apcb.aqm, AP_DOMAINS);
>> - vfio_ap_matrix_init(&matrix_dev->info, &matrix_mdev->shadow_apcb);
>> + vfio_ap_matrix_init(&matrix_dev->config_info,
>> + &matrix_mdev->shadow_apcb);
>>
>> /*
>> * Copy the adapters, domains and control domains to the shadow_apcb
>> @@ -369,9 +365,9 @@ static bool vfio_ap_mdev_filter_matrix(struct ap_matrix_mdev *matrix_mdev)
>> * AP configuration.
>> */
>> bitmap_and(matrix_mdev->shadow_apcb.apm, matrix_mdev->matrix.apm,
>> - (unsigned long *)matrix_dev->info.apm, AP_DEVICES);
>> + (unsigned long *)matrix_dev->config_info.apm, AP_DEVICES);
>> bitmap_and(matrix_mdev->shadow_apcb.aqm, matrix_mdev->matrix.aqm,
>> - (unsigned long *)matrix_dev->info.aqm, AP_DOMAINS);
>> + (unsigned long *)matrix_dev->config_info.aqm, AP_DOMAINS);
>>
>> for_each_set_bit_inv(apid, matrix_mdev->shadow_apcb.apm, AP_DEVICES) {
>> for_each_set_bit_inv(apqi, matrix_mdev->shadow_apcb.aqm,
>> @@ -417,8 +413,9 @@ static int vfio_ap_mdev_probe(struct mdev_device *mdev)
>> &vfio_ap_matrix_dev_ops);
>>
>> matrix_mdev->mdev = mdev;
>> - vfio_ap_matrix_init(&matrix_dev->info, &matrix_mdev->matrix);
>> - vfio_ap_matrix_init(&matrix_dev->info, &matrix_mdev->shadow_apcb);
>> + vfio_ap_matrix_init(&matrix_dev->config_info, &matrix_mdev->matrix);
>> + vfio_ap_matrix_init(&matrix_dev->config_info,
>> + &matrix_mdev->shadow_apcb);
>> hash_init(matrix_mdev->qtable.queues);
>> mdev_set_drvdata(mdev, matrix_mdev);
>> mutex_lock(&matrix_dev->lock);
>> @@ -772,13 +769,17 @@ static void vfio_ap_unlink_apqn_fr_mdev(struct ap_matrix_mdev *matrix_mdev,
>>
>> q = vfio_ap_mdev_get_queue(matrix_mdev, AP_MKQID(apid, apqi));
>> /* If the queue is assigned to the matrix mdev, unlink it. */
>> - if (q)
>> + if (q) {
>> vfio_ap_unlink_queue_fr_mdev(q);
>>
>> - /* If the queue is assigned to the APCB, store it in @qtable. */
>> - if (test_bit_inv(apid, matrix_mdev->shadow_apcb.apm) &&
>> - test_bit_inv(apqi, matrix_mdev->shadow_apcb.aqm))
>> - hash_add(qtable->queues, &q->mdev_qnode, q->apqn);
>> + /* If the queue is assigned to the APCB, store it in @qtable. */
>> + if (qtable) {
>> + if (test_bit_inv(apid, matrix_mdev->shadow_apcb.apm) &&
>> + test_bit_inv(apqi, matrix_mdev->shadow_apcb.aqm))
>> + hash_add(qtable->queues, &q->mdev_qnode,
>> + q->apqn);
>> + }
>> + }
>> }
>>
>> /**
>> @@ -1702,9 +1703,31 @@ static void vfio_ap_mdev_put_qlocks(struct ap_guest *guest)
>> mutex_unlock(&guest->kvm->lock);
>>
>> mutex_unlock(&matrix_dev->lock);
>> +
>> up_read(&matrix_dev->guests_lock);
>> }
>>
>> +static bool vfio_ap_mdev_do_filter_matrix(struct ap_matrix_mdev *matrix_mdev,
>> + struct vfio_ap_queue *q)
>> +{
>> + unsigned long apid = AP_QID_CARD(q->apqn);
>> + unsigned long apqi = AP_QID_QUEUE(q->apqn);
>> +
>> + /*
>> + * If the queue is being probed because its APID or APQI is in the
>> + * process of being added to the host's AP configuration, then we don't
>> + * want to filter the matrix now as the filtering will be done after
>> + * the driver is notified that the AP bus scan operation has completed
>> + * (see the vfio_ap_on_scan_complete callback function).
>> + */
>> + if (test_bit_inv(apid, matrix_mdev->apm_add) ||
>> + test_bit_inv(apqi, matrix_mdev->aqm_add))
>> + return false;
>> +
>> +
>> + return true;
>> +}
>> +
>> int vfio_ap_mdev_probe_queue(struct ap_device *apdev)
>> {
>> struct vfio_ap_queue *q;
>> @@ -1722,8 +1745,10 @@ int vfio_ap_mdev_probe_queue(struct ap_device *apdev)
>> if (guest) {
>> vfio_ap_mdev_link_queue(guest->matrix_mdev, q);
>>
>> - if (vfio_ap_mdev_filter_matrix(guest->matrix_mdev))
>> - vfio_ap_mdev_hotplug_apcb(guest->matrix_mdev);
>> + if (vfio_ap_mdev_do_filter_matrix(guest->matrix_mdev, q)) {
>> + if (vfio_ap_mdev_filter_matrix(guest->matrix_mdev))
>> + vfio_ap_mdev_hotplug_apcb(guest->matrix_mdev);
>> + }
>> } else {
>> vfio_ap_queue_link_mdev(q);
>> }
>> @@ -1767,3 +1792,274 @@ int vfio_ap_mdev_resource_in_use(unsigned long *apm, unsigned long *aqm)
>>
>> return ret;
>> }
>> +
>> +/**
>> + * vfio_ap_mdev_unlink_adapters - unlinks all queues from the matrix mdev with
>> + * an APQI of a domain that has been removed from
>> + * the host's AP configuration.
>> + *
>> + * @matrix_mdev: the matrix mdev from which the queues are to be unlinked
>> + * @ap_unlink: a bitmap specifying the APIDs of the adapters removed from the
>> + * host's AP configuration.
>> + */
>> +static void vfio_ap_mdev_unlink_adapters(struct ap_matrix_mdev *matrix_mdev,
>> + unsigned long *ap_unlink)
>> +{
>> + unsigned long apid;
>> +
>> + for_each_set_bit_inv(apid, ap_unlink, AP_DEVICES)
>> + vfio_ap_mdev_unlink_adapter(matrix_mdev, apid, NULL);
>> +}
>> +
>> +/**
>> + * vfio_ap_mdev_unlink_domains - unlinks all queues from the matrix mdev with an
>> + * APQI of a domain that has been removed from the
>> + * host's AP configuration.
>> + *
>> + * @matrix_mdev: the matrix mdev from which the queues are to be unlinked
>> + * @aq_unlink: a bitmap specifying the APQIs of the domains removed from the
>> + * host's AP configuration.
>> + */
>> +static void vfio_ap_mdev_unlink_domains(struct ap_matrix_mdev *matrix_mdev,
>> + unsigned long *aq_unlink)
>> +{
>> + unsigned long apqi;
>> +
>> + for_each_set_bit_inv(apqi, aq_unlink, AP_DOMAINS)
>> + vfio_ap_mdev_unlink_domain(matrix_mdev, apqi, NULL);
>> +}
>> +
>> +/**
>> + * vfio_ap_mdev_hot_unplug_cfg - hot unplug the adapters, domains and control
>> + * domains that have been removed from the host's
>> + * AP configuration from a guest.
>> + *
>> + * @guest: the guest
>> + * @aprem: the adapters that have been removed from the host's AP configuration
>> + * @aqrem: the domains that have been removed from the host's AP configuration
>> + */
>> +static void vfio_ap_mdev_hot_unplug_cfg(struct ap_guest *guest,
>> + unsigned long *aprem,
>> + unsigned long *aqrem)
>> +{
>> + vfio_ap_mdev_unlink_adapters(guest->matrix_mdev, aprem);
>> + vfio_ap_mdev_unlink_domains(guest->matrix_mdev, aqrem);
>> +
>> + if (vfio_ap_mdev_filter_matrix(guest->matrix_mdev) ||
>> + vfio_ap_mdev_filter_cdoms(guest->matrix_mdev)) {
>> + mutex_lock(&guest->kvm->lock);
>> + mutex_lock(&matrix_dev->lock);
>> +
>> + vfio_ap_mdev_hotplug_apcb(guest->matrix_mdev);
>> +
>> + mutex_unlock(&guest->kvm->lock);
>> + mutex_unlock(&matrix_dev->lock);
>> + }
>> +}
>> +
>> +/**
>> + * vfio_ap_mdev_cfg_remove - determines which guests are using the adapters,
>> + * domains and control domains that have been removed
>> + * from the host AP configuration and unplugs them
>> + * from those guests.
>> + *
>> + * @ap_remove: bitmap specifying which adapters have been removed from the host
>> + * config.
>> + * @aq_remove: bitmap specifying which domains have been removed from the host
>> + * config.
>> + * @cd_remove: bitmap specifying which control domains have been removed from
>> + * the host config.
>> + */
>> +static void vfio_ap_mdev_cfg_remove(unsigned long *ap_remove,
>> + unsigned long *aq_remove,
>> + unsigned long *cd_remove)
>> +{
>> + struct ap_guest *guest;
>> + DECLARE_BITMAP(aprem, AP_DEVICES);
>> + DECLARE_BITMAP(aqrem, AP_DOMAINS);
>> + int do_ap_remove, do_aq_remove, do_cd_remove;
>> +
>> + list_for_each_entry(guest, &matrix_dev->guests, node) {
>> + do_ap_remove = bitmap_and(aprem, ap_remove,
>> + guest->matrix_mdev->matrix.apm,
>> + AP_DEVICES);
>> + do_aq_remove = bitmap_and(aqrem, aq_remove,
>> + guest->matrix_mdev->matrix.aqm,
>> + AP_DOMAINS);
>> + do_cd_remove = bitmap_and(aqrem, cd_remove,
>> + guest->matrix_mdev->matrix.aqm,
>> + AP_DOMAINS);
>> +
>> + if (!do_ap_remove && !do_aq_remove && !do_cd_remove)
>> + continue;
>> +
>> + vfio_ap_mdev_hot_unplug_cfg(guest, aprem, aqrem);
>> + }
>> +}
>> +
>> +/**
>> + * vfio_ap_mdev_on_cfg_remove - responds to the removal of adapters, domains and
>> + * control domains from the host AP configuration
>> + * by unplugging them from the guests that are
>> + * using them.
>> + */
>> +static void vfio_ap_mdev_on_cfg_remove(void)
>> +{
>> + int ap_remove, aq_remove, cd_remove;
>> + DECLARE_BITMAP(aprem, AP_DEVICES);
>> + DECLARE_BITMAP(aqrem, AP_DOMAINS);
>> + DECLARE_BITMAP(cdrem, AP_DOMAINS);
>> + unsigned long *cur_apm, *cur_aqm, *cur_adm;
>> + unsigned long *prev_apm, *prev_aqm, *prev_adm;
>> +
>> + cur_apm = (unsigned long *)matrix_dev->config_info.apm;
>> + cur_aqm = (unsigned long *)matrix_dev->config_info.aqm;
>> + cur_adm = (unsigned long *)matrix_dev->config_info.adm;
>> + prev_apm = (unsigned long *)matrix_dev->config_info_prev.apm;
>> + prev_aqm = (unsigned long *)matrix_dev->config_info_prev.aqm;
>> + prev_adm = (unsigned long *)matrix_dev->config_info_prev.adm;
>> +
>> + ap_remove = bitmap_andnot(aprem, prev_apm, cur_apm, AP_DEVICES);
>> + aq_remove = bitmap_andnot(aqrem, prev_aqm, cur_aqm, AP_DOMAINS);
>> + cd_remove = bitmap_andnot(cdrem, prev_adm, cur_adm, AP_DOMAINS);
>> +
>> + if (ap_remove || aq_remove || cd_remove)
>> + vfio_ap_mdev_cfg_remove(aprem, aqrem, cdrem);
>> +}
>> +
>> +/**
>> + * vfio_ap_mdev_cfg_add - store bitmaps specifying the adapters, domains and
>> + * control domains that have been added to the host's
>> + * AP configuration for each matrix mdev to which they
>> + * are assigned.
>> + *
>> + * @apm_add: a bitmap specifying the adapters that have been added to the AP
>> + * configuration.
>> + * @aqm_add: a bitmap specifying the domains that have been added to the AP
>> + * configuration.
>> + * @adm_add: a bitmap specifying the control domains that have been added to the
>> + * AP configuration.
>> + */
>> +static void vfio_ap_mdev_cfg_add(unsigned long *apm_add, unsigned long *aqm_add,
>> + unsigned long *adm_add)
>> +{
>> + struct ap_guest *guest;
>> +
>> + list_for_each_entry(guest, &matrix_dev->guests, node) {
>> + bitmap_and(guest->matrix_mdev->apm_add,
>> + guest->matrix_mdev->matrix.apm, apm_add, AP_DEVICES);
>> + bitmap_and(guest->matrix_mdev->aqm_add,
>> + guest->matrix_mdev->matrix.aqm, aqm_add, AP_DOMAINS);
>> + bitmap_and(guest->matrix_mdev->adm_add,
>> + guest->matrix_mdev->matrix.adm, adm_add, AP_DEVICES);
>> + }
>> +}
>> +
>> +/**
>> + * vfio_ap_mdev_on_cfg_add - responds to the addition of adapters, domains and
>> + * control domains to the host AP configuration
>> + * by updating the bitmaps that specify what adapters,
>> + * domains and control domains have been added so they
>> + * can be hot plugged into the guest when the AP bus
>> + * scan completes (see vfio_ap_on_scan_complete
>> + * function).
>> + */
>> +static void vfio_ap_mdev_on_cfg_add(void)
>> +{
>> + bool do_add;
>> + DECLARE_BITMAP(apm_add, AP_DEVICES);
>> + DECLARE_BITMAP(aqm_add, AP_DOMAINS);
>> + DECLARE_BITMAP(adm_add, AP_DOMAINS);
>> + unsigned long *cur_apm, *cur_aqm, *cur_adm;
>> + unsigned long *prev_apm, *prev_aqm, *prev_adm;
>> +
>> + cur_apm = (unsigned long *)matrix_dev->config_info.apm;
>> + cur_aqm = (unsigned long *)matrix_dev->config_info.aqm;
>> + cur_adm = (unsigned long *)matrix_dev->config_info.adm;
>> +
>> + prev_apm = (unsigned long *)matrix_dev->config_info_prev.apm;
>> + prev_aqm = (unsigned long *)matrix_dev->config_info_prev.aqm;
>> + prev_adm = (unsigned long *)matrix_dev->config_info_prev.adm;
>> +
>> + do_add = bitmap_andnot(apm_add, cur_apm, prev_apm, AP_DEVICES);
>> + do_add |= bitmap_andnot(aqm_add, cur_aqm, prev_aqm, AP_DOMAINS);
>> + do_add |= bitmap_andnot(adm_add, cur_adm, prev_adm, AP_DOMAINS);
>> +
>> + if (do_add)
>> + vfio_ap_mdev_cfg_add(apm_add, aqm_add, adm_add);
>> +}
>> +
>> +/**
>> + * vfio_ap_on_cfg_changed - handles notification of changes to the host AP
>> + * configuration.
>> + *
>> + * @new_config_info: the new host AP configuration
>> + * @old_config_info: the previous host AP configuration
>> + */
>> +void vfio_ap_on_cfg_changed(struct ap_config_info *new_config_info,
>> + struct ap_config_info *old_config_info)
>> +{
>> + down_read(&matrix_dev->guests_lock);
>> +
>> + memcpy(&matrix_dev->config_info_prev, old_config_info,
>> + sizeof(struct ap_config_info));
>> + memcpy(&matrix_dev->config_info, new_config_info,
>> + sizeof(struct ap_config_info));
>> + vfio_ap_mdev_on_cfg_remove();
> Back to the topic of locking: it looks to me that on this path you
> do the filtering and thus the accesses to matrix_mdev->shadow_apcb,
> matrix_mdev->matrix and matrix_dev->config_info some of which are
> of type write whithout the matrix_dev->lock held. More precisely
> only with the matrix_dev->guests_lock held in "read" mode.
>
> Did I misread the code? If not, how is that OK?
You make a valid point, a struct rw_semaphore is not adequate for the
purposes
it is used in this patch series. It needs to be a mutex.
For v18 which is forthcoming probably this week, I've been reworking the
locking
based on your observation that the struct ap_guest is not necessary given we
already have a list of the mediated devices which contain the KVM
pointer. On the other
hand, the matrix_dev->guests_lock will remain, except it will have a new
name,
matrix_dev->kvm_lock, and will be changed to a mutex per your
observation above.
So, I will address this question based on the forthcoming patches. The
purpose and
usage of the matrix_dev->kvm_lock, however, will not differ much, if at
all, from this
v17 series.
Let's start with the purposes of the matrix_dev->kvm lock:
The primary purpose of this lock is to enforce a locking order that ensures
the matrix_mdev->kvm->lock is taken before the matrix_dev->lock to
prevent a lockdep splat. Consequently, any function that dynamically updates
the guest's APCB must take this lock before any other; including, all
mediated
device assign/unassign interfaces, the vfio_ap driver's probe/remove
callback,
the mdev remove callback and the AP bus callbacks described herein. In
all other
cases, it is unnecessary to take the matrix_dev->kvm_lock because the
matrix_dev->lock is sufficient since all fields in the matrix_mdev are
protected
by that lock including matrix_mdev->kvm.
So, let's look at each of the objects you mentioned:
* Access to matrix_mdev->shadow_apcb:
In every case that the guest's APCB is updated - which includes
filtering and updating
the shadow APCB, the matrix_dev->kvm_lock will be taken before any
other locks; so,
in the context of the vfio_ap_cfg_changed callback, it is sufficient
to operate on the
matrix_mdev->shadow_apcb with only the matrix_dev->kvm_lock held.
* Access to matrix_mdev->matrix:
The matrix_mdev->matrix is only changed via the mediated device's sysfs
assign/unassign interfaces. Since these functions may update the guest's
APCB, they take the matrix_dev->kvm_lock prior to taking any other
lock and
hold it until the operation is complete. That being the case, the
matrix_mdev->matrix will remain stable for the duration of the the
vfio_ap_cfg_changed callback.
* Access to matrix_dev->config_info:
The matrix_dev->config_info value is set in the vfio_ap_cfg_changed
callback
function subsequent to taking the matrix_dev->kvm_lock, so access to the
matrix_dev->config_info is protected by that lock for the duration of the
function. The only other place matrix_dev->config_info is accessed is
in the
filtering functions which will only ever be called while the
matrix_dev->kvm_lock
is held.
>
> BTW I got delayed on my "locking rules" writeup. Sorry for that!
No worries, I've been writing up a vfio-ap-locking.rst document to
include with the next
version of the patch series.
>
> Regards,
> Halil
>
>> + vfio_ap_mdev_on_cfg_add();
>> +
>> + up_read(&matrix_dev->guests_lock);
>> +}
>> +
>> +static void vfio_ap_mdev_hot_plug_cfg(struct ap_guest *guest)
>> +{
>> + bool filter_matrix, filter_cdoms, do_hotplug = false;
>> +
>> + filter_matrix = bitmap_intersects(guest->matrix_mdev->matrix.apm,
>> + guest->matrix_mdev->apm_add,
>> + AP_DEVICES) ||
>> + bitmap_intersects(guest->matrix_mdev->matrix.aqm,
>> + guest->matrix_mdev->aqm_add,
>> + AP_DOMAINS);
>> +
>> + filter_cdoms = bitmap_intersects(guest->matrix_mdev->matrix.adm,
>> + guest->matrix_mdev->aqm_add,
>> + AP_DOMAINS);
>> +
>> + mutex_lock(&guest->kvm->lock);
>> + mutex_lock(&matrix_dev->lock);
>> +
>> + if (filter_matrix)
>> + do_hotplug |= vfio_ap_mdev_filter_matrix(guest->matrix_mdev);
>> +
>> + if (filter_cdoms)
>> + do_hotplug |= vfio_ap_mdev_filter_cdoms(guest->matrix_mdev);
>> +
>> + if (do_hotplug)
>> + vfio_ap_mdev_hotplug_apcb(guest->matrix_mdev);
>> +
>> + mutex_unlock(&matrix_dev->lock);
>> + mutex_unlock(&guest->kvm->lock);
>> +}
>> +
>> +void vfio_ap_on_scan_complete(struct ap_config_info *new_config_info,
>> + struct ap_config_info *old_config_info)
>> +{
>> + struct ap_guest *guest;
>> +
>> + down_read(&matrix_dev->guests_lock);
>> +
>> + list_for_each_entry(guest, &matrix_dev->guests, node) {
>> + if (bitmap_empty(guest->matrix_mdev->apm_add, AP_DEVICES) &&
>> + bitmap_empty(guest->matrix_mdev->aqm_add, AP_DOMAINS) &&
>> + bitmap_empty(guest->matrix_mdev->adm_add, AP_DOMAINS))
>> + continue;
>> +
>> + vfio_ap_mdev_hot_plug_cfg(guest);
>> + bitmap_clear(guest->matrix_mdev->apm_add, 0, AP_DEVICES);
>> + bitmap_clear(guest->matrix_mdev->aqm_add, 0, AP_DOMAINS);
>> + bitmap_clear(guest->matrix_mdev->adm_add, 0, AP_DOMAINS);
>> + }
>> +
>> + up_read(&matrix_dev->guests_lock);
>> +}
>> diff --git a/drivers/s390/crypto/vfio_ap_private.h b/drivers/s390/crypto/vfio_ap_private.h
>> index 97da41f87c65..affa63da7f88 100644
>> --- a/drivers/s390/crypto/vfio_ap_private.h
>> +++ b/drivers/s390/crypto/vfio_ap_private.h
>> @@ -37,7 +37,9 @@ struct ap_guest {
>> *
>> * @device: generic device structure associated with the AP matrix device
>> * @available_instances: number of mediated matrix devices that can be created
>> - * @info: the struct containing the output from the PQAP(QCI) instruction
>> + * @config_info: the struct containing the output from the PQAP(QCI) instruction
>> + * @config_info_prev: the struct containing the previous output from the
>> + * PQAP(AQIC) instruction
>> * @mdev_list: the list of mediated matrix devices created
>> * @lock: mutex for locking the AP matrix device. This lock will be
>> * taken every time we fiddle with state managed by the vfio_ap
>> @@ -52,7 +54,8 @@ struct ap_guest {
>> struct ap_matrix_dev {
>> struct device device;
>> atomic_t available_instances;
>> - struct ap_config_info info;
>> + struct ap_config_info config_info;
>> + struct ap_config_info config_info_prev;
>> struct list_head mdev_list;
>> struct mutex lock;
>> struct ap_driver *vfio_ap_drv;
>> @@ -110,6 +113,13 @@ struct ap_queue_table {
>> * @mdev: the mediated device
>> * @qtable: table of queues (struct vfio_ap_queue) assigned to the mdev
>> * @guest: the KVM guest using the matrix mdev
>> + * @apm_add: adapters to be hot plugged into the guest when the vfio_ap
>> + * device driver is notified that the AP bus scan has completed.
>> + * @aqm_add: domains to be hot plugged into the guest when the vfio_ap
>> + * device driver is notified that the AP bus scan has completed.
>> + * @adm_add: control domains to be hot plugged into the guest when the
>> + * vfio_ap device driver is notified that the AP bus scan has
>> + * completed.
>> */
>> struct ap_matrix_mdev {
>> struct vfio_device vdev;
>> @@ -121,6 +131,9 @@ struct ap_matrix_mdev {
>> struct mdev_device *mdev;
>> struct ap_queue_table qtable;
>> struct ap_guest *guest;
>> + DECLARE_BITMAP(apm_add, AP_DEVICES);
>> + DECLARE_BITMAP(aqm_add, AP_DOMAINS);
>> + DECLARE_BITMAP(adm_add, AP_DOMAINS);
>> };
>>
>> /**
>> @@ -151,4 +164,10 @@ void vfio_ap_mdev_remove_queue(struct ap_device *queue);
>>
>> int vfio_ap_mdev_resource_in_use(unsigned long *apm, unsigned long *aqm);
>>
>> +
>> +void vfio_ap_on_cfg_changed(struct ap_config_info *new_config_info,
>> + struct ap_config_info *old_config_info);
>> +void vfio_ap_on_scan_complete(struct ap_config_info *new_config_info,
>> + struct ap_config_info *old_config_info);
>> +
>> #endif /* _VFIO_AP_PRIVATE_H_ */
Powered by blists - more mailing lists