linux-kernel - [PATCH 2/2] drm/bridge: ti-sn65dsi83: Allow GPIO operations to sleep

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-Id: <20220207075325.285179-2-alexander.stein@ew.tq-group.com>
Date:   Mon,  7 Feb 2022 08:53:25 +0100
From:   Alexander Stein <alexander.stein@...tq-group.com>
To:     Andrzej Hajda <andrzej.hajda@...el.com>,
        Neil Armstrong <narmstrong@...libre.com>,
        Robert Foss <robert.foss@...aro.org>,
        Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
        Jonas Karlman <jonas@...boo.se>,
        Jernej Skrabec <jernej.skrabec@...il.com>,
        David Airlie <airlied@...ux.ie>,
        Daniel Vetter <daniel@...ll.ch>
Cc:     Alexander Stein <alexander.stein@...tq-group.com>,
        dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org
Subject: [PATCH 2/2] drm/bridge: ti-sn65dsi83: Allow GPIO operations to sleep

There is no need to require non-sleeping GPIO access. Silence the
WARN_ON() if GPIO is using e.g. I2C expanders.

Signed-off-by: Alexander Stein <alexander.stein@...tq-group.com>
---
If the GPIO is from an expander on I2C, this warning will rise
obviously. Straight forward fix.

 drivers/gpu/drm/bridge/ti-sn65dsi83.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi83.c b/drivers/gpu/drm/bridge/ti-sn65dsi83.c
index 1f02596d6db4..2927fa2abd3d 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi83.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi83.c
@@ -346,7 +346,7 @@ static void sn65dsi83_atomic_enable(struct drm_bridge *bridge,
 	}
 
 	/* Deassert reset */
-	gpiod_set_value(ctx->enable_gpio, 1);
+	gpiod_set_value_cansleep(ctx->enable_gpio, 1);
 	usleep_range(1000, 1100);
 
 	/* Get the LVDS format from the bridge state. */
@@ -497,7 +497,7 @@ static void sn65dsi83_atomic_disable(struct drm_bridge *bridge,
 	int ret;
 
 	/* Put the chip in reset, pull EN line low, and assure 10ms reset low timing. */
-	gpiod_set_value(ctx->enable_gpio, 0);
+	gpiod_set_value_cansleep(ctx->enable_gpio, 0);
 	usleep_range(10000, 11000);
 
 	ret = regulator_disable(ctx->vcc);
-- 
2.25.1