| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220208153639.255278-10-iwona.winiarska@intel.com>
Date: Tue, 8 Feb 2022 16:36:35 +0100
From: Iwona Winiarska <iwona.winiarska@...el.com>
To: linux-kernel@...r.kernel.org, openbmc@...ts.ozlabs.org,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: devicetree@...r.kernel.org, linux-aspeed@...ts.ozlabs.org,
linux-arm-kernel@...ts.infradead.org, linux-hwmon@...r.kernel.org,
linux-doc@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...id.au>,
Jean Delvare <jdelvare@...e.com>,
Guenter Roeck <linux@...ck-us.net>,
Arnd Bergmann <arnd@...db.de>, Olof Johansson <olof@...om.net>,
Jonathan Corbet <corbet@....net>,
Borislav Petkov <bp@...en8.de>,
Pierre-Louis Bossart <pierre-louis.bossart@...ux.intel.com>,
Tony Luck <tony.luck@...el.com>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Dan Williams <dan.j.williams@...el.com>,
Randy Dunlap <rdunlap@...radead.org>,
Zev Weiss <zweiss@...inix.com>,
David Muller <d.mueller@...oft.ch>,
Dave Hansen <dave.hansen@...el.com>,
Billy Tsai <billy_tsai@...eedtech.com>,
Iwona Winiarska <iwona.winiarska@...el.com>
Subject: [PATCH v8 09/13] peci: Add peci-cpu driver
PECI is an interface that may be used by different types of devices.
Add a peci-cpu driver compatible with Intel processors. The driver is
responsible for handling auxiliary devices that can subsequently be used
by other drivers (e.g. hwmons).
Signed-off-by: Iwona Winiarska <iwona.winiarska@...el.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@...ux.intel.com>
---
MAINTAINERS | 1 +
drivers/peci/Kconfig | 15 ++
drivers/peci/Makefile | 2 +
drivers/peci/cpu.c | 343 +++++++++++++++++++++++++++++++++++++++
drivers/peci/device.c | 1 +
drivers/peci/internal.h | 27 +++
drivers/peci/request.c | 213 ++++++++++++++++++++++++
include/linux/peci-cpu.h | 40 +++++
include/linux/peci.h | 8 -
9 files changed, 642 insertions(+), 8 deletions(-)
create mode 100644 drivers/peci/cpu.c
create mode 100644 include/linux/peci-cpu.h
diff --git a/MAINTAINERS b/MAINTAINERS
index a63b106a09fb..503d3e636263 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15115,6 +15115,7 @@ L: openbmc@...ts.ozlabs.org (moderated for non-subscribers)
S: Supported
F: Documentation/devicetree/bindings/peci/
F: drivers/peci/
+F: include/linux/peci-cpu.h
F: include/linux/peci.h
PENSANDO ETHERNET DRIVERS
diff --git a/drivers/peci/Kconfig b/drivers/peci/Kconfig
index 99279df97a78..89872ad83320 100644
--- a/drivers/peci/Kconfig
+++ b/drivers/peci/Kconfig
@@ -16,6 +16,21 @@ menuconfig PECI
if PECI
+config PECI_CPU
+ tristate "PECI CPU"
+ select AUXILIARY_BUS
+ help
+ This option enables peci-cpu driver for Intel processors. It is
+ responsible for creating auxiliary devices that can subsequently
+ be used by other drivers in order to perform various
+ functionalities such as e.g. temperature monitoring.
+
+ Additional drivers must be enabled in order to use the functionality
+ of the device.
+
+ This driver can also be built as a module. If so, the module
+ will be called peci-cpu.
+
source "drivers/peci/controller/Kconfig"
endif # PECI
diff --git a/drivers/peci/Makefile b/drivers/peci/Makefile
index 917f689e147a..7de18137e738 100644
--- a/drivers/peci/Makefile
+++ b/drivers/peci/Makefile
@@ -3,6 +3,8 @@
# Core functionality
peci-y := core.o request.o device.o sysfs.o
obj-$(CONFIG_PECI) += peci.o
+peci-cpu-y := cpu.o
+obj-$(CONFIG_PECI_CPU) += peci-cpu.o
# Hardware specific bus drivers
obj-y += controller/
diff --git a/drivers/peci/cpu.c b/drivers/peci/cpu.c
new file mode 100644
index 000000000000..68eb61c65d34
--- /dev/null
+++ b/drivers/peci/cpu.c
@@ -0,0 +1,343 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2021 Intel Corporation
+
+#include <linux/auxiliary_bus.h>
+#include <linux/module.h>
+#include <linux/peci.h>
+#include <linux/peci-cpu.h>
+#include <linux/slab.h>
+
+#include "internal.h"
+
+/**
+ * peci_temp_read() - read the maximum die temperature from PECI target device
+ * @device: PECI device to which request is going to be sent
+ * @temp_raw: where to store the read temperature
+ *
+ * It uses GetTemp PECI command.
+ *
+ * Return: 0 if succeeded, other values in case errors.
+ */
+int peci_temp_read(struct peci_device *device, s16 *temp_raw)
+{
+ struct peci_request *req;
+
+ req = peci_xfer_get_temp(device);
+ if (IS_ERR(req))
+ return PTR_ERR(req);
+
+ *temp_raw = peci_request_temp_read(req);
+
+ peci_request_free(req);
+
+ return 0;
+}
+EXPORT_SYMBOL_NS_GPL(peci_temp_read, PECI_CPU);
+
+/**
+ * peci_pcs_read() - read PCS register
+ * @device: PECI device to which request is going to be sent
+ * @index: PCS index
+ * @param: PCS parameter
+ * @data: where to store the read data
+ *
+ * It uses RdPkgConfig PECI command.
+ *
+ * Return: 0 if succeeded, other values in case errors.
+ */
+int peci_pcs_read(struct peci_device *device, u8 index, u16 param, u32 *data)
+{
+ struct peci_request *req;
+ int ret;
+
+ req = peci_xfer_pkg_cfg_readl(device, index, param);
+ if (IS_ERR(req))
+ return PTR_ERR(req);
+
+ ret = peci_request_status(req);
+ if (ret)
+ goto out_req_free;
+
+ *data = peci_request_data_readl(req);
+out_req_free:
+ peci_request_free(req);
+
+ return ret;
+}
+EXPORT_SYMBOL_NS_GPL(peci_pcs_read, PECI_CPU);
+
+/**
+ * peci_pci_local_read() - read 32-bit memory location using raw address
+ * @device: PECI device to which request is going to be sent
+ * @bus: bus
+ * @dev: device
+ * @func: function
+ * @reg: register
+ * @data: where to store the read data
+ *
+ * It uses RdPCIConfigLocal PECI command.
+ *
+ * Return: 0 if succeeded, other values in case errors.
+ */
+int peci_pci_local_read(struct peci_device *device, u8 bus, u8 dev, u8 func,
+ u16 reg, u32 *data)
+{
+ struct peci_request *req;
+ int ret;
+
+ req = peci_xfer_pci_cfg_local_readl(device, bus, dev, func, reg);
+ if (IS_ERR(req))
+ return PTR_ERR(req);
+
+ ret = peci_request_status(req);
+ if (ret)
+ goto out_req_free;
+
+ *data = peci_request_data_readl(req);
+out_req_free:
+ peci_request_free(req);
+
+ return ret;
+}
+EXPORT_SYMBOL_NS_GPL(peci_pci_local_read, PECI_CPU);
+
+/**
+ * peci_ep_pci_local_read() - read 32-bit memory location using raw address
+ * @device: PECI device to which request is going to be sent
+ * @seg: PCI segment
+ * @bus: bus
+ * @dev: device
+ * @func: function
+ * @reg: register
+ * @data: where to store the read data
+ *
+ * Like &peci_pci_local_read, but it uses RdEndpointConfig PECI command.
+ *
+ * Return: 0 if succeeded, other values in case errors.
+ */
+int peci_ep_pci_local_read(struct peci_device *device, u8 seg,
+ u8 bus, u8 dev, u8 func, u16 reg, u32 *data)
+{
+ struct peci_request *req;
+ int ret;
+
+ req = peci_xfer_ep_pci_cfg_local_readl(device, seg, bus, dev, func, reg);
+ if (IS_ERR(req))
+ return PTR_ERR(req);
+
+ ret = peci_request_status(req);
+ if (ret)
+ goto out_req_free;
+
+ *data = peci_request_data_readl(req);
+out_req_free:
+ peci_request_free(req);
+
+ return ret;
+}
+EXPORT_SYMBOL_NS_GPL(peci_ep_pci_local_read, PECI_CPU);
+
+/**
+ * peci_mmio_read() - read 32-bit memory location using 64-bit bar offset address
+ * @device: PECI device to which request is going to be sent
+ * @bar: PCI bar
+ * @seg: PCI segment
+ * @bus: bus
+ * @dev: device
+ * @func: function
+ * @address: 64-bit MMIO address
+ * @data: where to store the read data
+ *
+ * It uses RdEndpointConfig PECI command.
+ *
+ * Return: 0 if succeeded, other values in case errors.
+ */
+int peci_mmio_read(struct peci_device *device, u8 bar, u8 seg,
+ u8 bus, u8 dev, u8 func, u64 address, u32 *data)
+{
+ struct peci_request *req;
+ int ret;
+
+ req = peci_xfer_ep_mmio64_readl(device, bar, seg, bus, dev, func, address);
+ if (IS_ERR(req))
+ return PTR_ERR(req);
+
+ ret = peci_request_status(req);
+ if (ret)
+ goto out_req_free;
+
+ *data = peci_request_data_readl(req);
+out_req_free:
+ peci_request_free(req);
+
+ return ret;
+}
+EXPORT_SYMBOL_NS_GPL(peci_mmio_read, PECI_CPU);
+
+static const char * const peci_adev_types[] = {
+ "cputemp",
+ "dimmtemp",
+};
+
+struct peci_cpu {
+ struct peci_device *device;
+ const struct peci_device_id *id;
+};
+
+static void adev_release(struct device *dev)
+{
+ struct auxiliary_device *adev = to_auxiliary_dev(dev);
+
+ auxiliary_device_uninit(adev);
+
+ kfree(adev->name);
+ kfree(adev);
+}
+
+static struct auxiliary_device *adev_alloc(struct peci_cpu *priv, int idx)
+{
+ struct peci_controller *controller = to_peci_controller(priv->device->dev.parent);
+ struct auxiliary_device *adev;
+ const char *name;
+ int ret;
+
+ adev = kzalloc(sizeof(*adev), GFP_KERNEL);
+ if (!adev)
+ return ERR_PTR(-ENOMEM);
+
+ name = kasprintf(GFP_KERNEL, "%s.%s", peci_adev_types[idx], (const char *)priv->id->data);
+ if (!name) {
+ ret = -ENOMEM;
+ goto free_adev;
+ }
+
+ adev->name = name;
+ adev->dev.parent = &priv->device->dev;
+ adev->dev.release = adev_release;
+ adev->id = (controller->id << 16) | (priv->device->addr);
+
+ ret = auxiliary_device_init(adev);
+ if (ret)
+ goto free_name;
+
+ return adev;
+
+free_name:
+ kfree(name);
+free_adev:
+ kfree(adev);
+ return ERR_PTR(ret);
+}
+
+static void unregister_adev(void *_adev)
+{
+ struct auxiliary_device *adev = _adev;
+
+ auxiliary_device_delete(adev);
+}
+
+static int devm_adev_add(struct device *dev, int idx)
+{
+ struct peci_cpu *priv = dev_get_drvdata(dev);
+ struct auxiliary_device *adev;
+ int ret;
+
+ adev = adev_alloc(priv, idx);
+ if (IS_ERR(adev))
+ return PTR_ERR(adev);
+
+ ret = auxiliary_device_add(adev);
+ if (ret) {
+ auxiliary_device_uninit(adev);
+ return ret;
+ }
+
+ ret = devm_add_action_or_reset(&priv->device->dev, unregister_adev, adev);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static void peci_cpu_add_adevices(struct peci_cpu *priv)
+{
+ struct device *dev = &priv->device->dev;
+ int ret, i;
+
+ for (i = 0; i < ARRAY_SIZE(peci_adev_types); i++) {
+ ret = devm_adev_add(dev, i);
+ if (ret) {
+ dev_warn(dev, "Failed to register PECI auxiliary: %s, ret = %d\n",
+ peci_adev_types[i], ret);
+ continue;
+ }
+ }
+}
+
+static int
+peci_cpu_probe(struct peci_device *device, const struct peci_device_id *id)
+{
+ struct device *dev = &device->dev;
+ struct peci_cpu *priv;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, priv);
+ priv->device = device;
+ priv->id = id;
+
+ peci_cpu_add_adevices(priv);
+
+ return 0;
+}
+
+static const struct peci_device_id peci_cpu_device_ids[] = {
+ { /* Haswell Xeon */
+ .family = 6,
+ .model = INTEL_FAM6_HASWELL_X,
+ .data = "hsx",
+ },
+ { /* Broadwell Xeon */
+ .family = 6,
+ .model = INTEL_FAM6_BROADWELL_X,
+ .data = "bdx",
+ },
+ { /* Broadwell Xeon D */
+ .family = 6,
+ .model = INTEL_FAM6_BROADWELL_D,
+ .data = "bdxd",
+ },
+ { /* Skylake Xeon */
+ .family = 6,
+ .model = INTEL_FAM6_SKYLAKE_X,
+ .data = "skx",
+ },
+ { /* Icelake Xeon */
+ .family = 6,
+ .model = INTEL_FAM6_ICELAKE_X,
+ .data = "icx",
+ },
+ { /* Icelake Xeon D */
+ .family = 6,
+ .model = INTEL_FAM6_ICELAKE_D,
+ .data = "icxd",
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(peci, peci_cpu_device_ids);
+
+static struct peci_driver peci_cpu_driver = {
+ .probe = peci_cpu_probe,
+ .id_table = peci_cpu_device_ids,
+ .driver = {
+ .name = "peci-cpu",
+ },
+};
+module_peci_driver(peci_cpu_driver);
+
+MODULE_AUTHOR("Iwona Winiarska <iwona.winiarska@...el.com>");
+MODULE_DESCRIPTION("PECI CPU driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PECI);
diff --git a/drivers/peci/device.c b/drivers/peci/device.c
index 184b5e650b0b..e6b0bffb14f4 100644
--- a/drivers/peci/device.c
+++ b/drivers/peci/device.c
@@ -3,6 +3,7 @@
#include <linux/bitfield.h>
#include <linux/peci.h>
+#include <linux/peci-cpu.h>
#include <linux/slab.h>
#include "internal.h"
diff --git a/drivers/peci/internal.h b/drivers/peci/internal.h
index 52c02e12874f..9d75ea54504c 100644
--- a/drivers/peci/internal.h
+++ b/drivers/peci/internal.h
@@ -22,6 +22,7 @@ void peci_request_free(struct peci_request *req);
int peci_request_status(struct peci_request *req);
u64 peci_request_dib_read(struct peci_request *req);
+s16 peci_request_temp_read(struct peci_request *req);
u8 peci_request_data_readb(struct peci_request *req);
u16 peci_request_data_readw(struct peci_request *req);
@@ -36,6 +37,32 @@ struct peci_request *peci_xfer_pkg_cfg_readw(struct peci_device *device, u8 inde
struct peci_request *peci_xfer_pkg_cfg_readl(struct peci_device *device, u8 index, u16 param);
struct peci_request *peci_xfer_pkg_cfg_readq(struct peci_device *device, u8 index, u16 param);
+struct peci_request *peci_xfer_pci_cfg_local_readb(struct peci_device *device,
+ u8 bus, u8 dev, u8 func, u16 reg);
+struct peci_request *peci_xfer_pci_cfg_local_readw(struct peci_device *device,
+ u8 bus, u8 dev, u8 func, u16 reg);
+struct peci_request *peci_xfer_pci_cfg_local_readl(struct peci_device *device,
+ u8 bus, u8 dev, u8 func, u16 reg);
+
+struct peci_request *peci_xfer_ep_pci_cfg_local_readb(struct peci_device *device, u8 seg,
+ u8 bus, u8 dev, u8 func, u16 reg);
+struct peci_request *peci_xfer_ep_pci_cfg_local_readw(struct peci_device *device, u8 seg,
+ u8 bus, u8 dev, u8 func, u16 reg);
+struct peci_request *peci_xfer_ep_pci_cfg_local_readl(struct peci_device *device, u8 seg,
+ u8 bus, u8 dev, u8 func, u16 reg);
+
+struct peci_request *peci_xfer_ep_pci_cfg_readb(struct peci_device *device, u8 seg,
+ u8 bus, u8 dev, u8 func, u16 reg);
+struct peci_request *peci_xfer_ep_pci_cfg_readw(struct peci_device *device, u8 seg,
+ u8 bus, u8 dev, u8 func, u16 reg);
+struct peci_request *peci_xfer_ep_pci_cfg_readl(struct peci_device *device, u8 seg,
+ u8 bus, u8 dev, u8 func, u16 reg);
+
+struct peci_request *peci_xfer_ep_mmio32_readl(struct peci_device *device, u8 bar, u8 seg,
+ u8 bus, u8 dev, u8 func, u64 offset);
+
+struct peci_request *peci_xfer_ep_mmio64_readl(struct peci_device *device, u8 bar, u8 seg,
+ u8 bus, u8 dev, u8 func, u64 offset);
/**
* struct peci_device_id - PECI device data to match
* @data: pointer to driver private data specific to device
diff --git a/drivers/peci/request.c b/drivers/peci/request.c
index a49eb351cda3..8d6dd7b6b559 100644
--- a/drivers/peci/request.c
+++ b/drivers/peci/request.c
@@ -3,6 +3,7 @@
#include <linux/bug.h>
#include <linux/export.h>
+#include <linux/pci.h>
#include <linux/peci.h>
#include <linux/slab.h>
#include <linux/types.h>
@@ -15,6 +16,10 @@
#define PECI_GET_DIB_WR_LEN 1
#define PECI_GET_DIB_RD_LEN 8
+#define PECI_GET_TEMP_CMD 0x01
+#define PECI_GET_TEMP_WR_LEN 1
+#define PECI_GET_TEMP_RD_LEN 2
+
#define PECI_RDPKGCFG_CMD 0xa1
#define PECI_RDPKGCFG_WR_LEN 5
#define PECI_RDPKGCFG_RD_LEN_BASE 1
@@ -22,6 +27,45 @@
#define PECI_WRPKGCFG_WR_LEN_BASE 6
#define PECI_WRPKGCFG_RD_LEN 1
+#define PECI_RDIAMSR_CMD 0xb1
+#define PECI_RDIAMSR_WR_LEN 5
+#define PECI_RDIAMSR_RD_LEN 9
+#define PECI_WRIAMSR_CMD 0xb5
+#define PECI_RDIAMSREX_CMD 0xd1
+#define PECI_RDIAMSREX_WR_LEN 6
+#define PECI_RDIAMSREX_RD_LEN 9
+
+#define PECI_RDPCICFG_CMD 0x61
+#define PECI_RDPCICFG_WR_LEN 6
+#define PECI_RDPCICFG_RD_LEN 5
+#define PECI_RDPCICFG_RD_LEN_MAX 24
+#define PECI_WRPCICFG_CMD 0x65
+
+#define PECI_RDPCICFGLOCAL_CMD 0xe1
+#define PECI_RDPCICFGLOCAL_WR_LEN 5
+#define PECI_RDPCICFGLOCAL_RD_LEN_BASE 1
+#define PECI_WRPCICFGLOCAL_CMD 0xe5
+#define PECI_WRPCICFGLOCAL_WR_LEN_BASE 6
+#define PECI_WRPCICFGLOCAL_RD_LEN 1
+
+#define PECI_ENDPTCFG_TYPE_LOCAL_PCI 0x03
+#define PECI_ENDPTCFG_TYPE_PCI 0x04
+#define PECI_ENDPTCFG_TYPE_MMIO 0x05
+#define PECI_ENDPTCFG_ADDR_TYPE_PCI 0x04
+#define PECI_ENDPTCFG_ADDR_TYPE_MMIO_D 0x05
+#define PECI_ENDPTCFG_ADDR_TYPE_MMIO_Q 0x06
+#define PECI_RDENDPTCFG_CMD 0xc1
+#define PECI_RDENDPTCFG_PCI_WR_LEN 12
+#define PECI_RDENDPTCFG_MMIO_WR_LEN_BASE 10
+#define PECI_RDENDPTCFG_MMIO_D_WR_LEN 14
+#define PECI_RDENDPTCFG_MMIO_Q_WR_LEN 18
+#define PECI_RDENDPTCFG_RD_LEN_BASE 1
+#define PECI_WRENDPTCFG_CMD 0xc5
+#define PECI_WRENDPTCFG_PCI_WR_LEN_BASE 13
+#define PECI_WRENDPTCFG_MMIO_D_WR_LEN_BASE 15
+#define PECI_WRENDPTCFG_MMIO_Q_WR_LEN_BASE 19
+#define PECI_WRENDPTCFG_RD_LEN 1
+
/* Device Specific Completion Code (CC) Definition */
#define PECI_CC_SUCCESS 0x40
#define PECI_CC_NEED_RETRY 0x80
@@ -202,6 +246,27 @@ struct peci_request *peci_xfer_get_dib(struct peci_device *device)
}
EXPORT_SYMBOL_NS_GPL(peci_xfer_get_dib, PECI);
+struct peci_request *peci_xfer_get_temp(struct peci_device *device)
+{
+ struct peci_request *req;
+ int ret;
+
+ req = peci_request_alloc(device, PECI_GET_TEMP_WR_LEN, PECI_GET_TEMP_RD_LEN);
+ if (!req)
+ return ERR_PTR(-ENOMEM);
+
+ req->tx.buf[0] = PECI_GET_TEMP_CMD;
+
+ ret = peci_request_xfer(req);
+ if (ret) {
+ peci_request_free(req);
+ return ERR_PTR(ret);
+ }
+
+ return req;
+}
+EXPORT_SYMBOL_NS_GPL(peci_xfer_get_temp, PECI);
+
static struct peci_request *
__pkg_cfg_read(struct peci_device *device, u8 index, u16 param, u8 len)
{
@@ -226,6 +291,108 @@ __pkg_cfg_read(struct peci_device *device, u8 index, u16 param, u8 len)
return req;
}
+static u32 __get_pci_addr(u8 bus, u8 dev, u8 func, u16 reg)
+{
+ return reg | PCI_DEVID(bus, PCI_DEVFN(dev, func)) << 12;
+}
+
+static struct peci_request *
+__pci_cfg_local_read(struct peci_device *device, u8 bus, u8 dev, u8 func, u16 reg, u8 len)
+{
+ struct peci_request *req;
+ u32 pci_addr;
+ int ret;
+
+ req = peci_request_alloc(device, PECI_RDPCICFGLOCAL_WR_LEN,
+ PECI_RDPCICFGLOCAL_RD_LEN_BASE + len);
+ if (!req)
+ return ERR_PTR(-ENOMEM);
+
+ pci_addr = __get_pci_addr(bus, dev, func, reg);
+
+ req->tx.buf[0] = PECI_RDPCICFGLOCAL_CMD;
+ req->tx.buf[1] = 0;
+ put_unaligned_le24(pci_addr, &req->tx.buf[2]);
+
+ ret = peci_request_xfer_retry(req);
+ if (ret) {
+ peci_request_free(req);
+ return ERR_PTR(ret);
+ }
+
+ return req;
+}
+
+static struct peci_request *
+__ep_pci_cfg_read(struct peci_device *device, u8 msg_type, u8 seg,
+ u8 bus, u8 dev, u8 func, u16 reg, u8 len)
+{
+ struct peci_request *req;
+ u32 pci_addr;
+ int ret;
+
+ req = peci_request_alloc(device, PECI_RDENDPTCFG_PCI_WR_LEN,
+ PECI_RDENDPTCFG_RD_LEN_BASE + len);
+ if (!req)
+ return ERR_PTR(-ENOMEM);
+
+ pci_addr = __get_pci_addr(bus, dev, func, reg);
+
+ req->tx.buf[0] = PECI_RDENDPTCFG_CMD;
+ req->tx.buf[1] = 0;
+ req->tx.buf[2] = msg_type;
+ req->tx.buf[3] = 0;
+ req->tx.buf[4] = 0;
+ req->tx.buf[5] = 0;
+ req->tx.buf[6] = PECI_ENDPTCFG_ADDR_TYPE_PCI;
+ req->tx.buf[7] = seg; /* PCI Segment */
+ put_unaligned_le32(pci_addr, &req->tx.buf[8]);
+
+ ret = peci_request_xfer_retry(req);
+ if (ret) {
+ peci_request_free(req);
+ return ERR_PTR(ret);
+ }
+
+ return req;
+}
+
+static struct peci_request *
+__ep_mmio_read(struct peci_device *device, u8 bar, u8 addr_type, u8 seg,
+ u8 bus, u8 dev, u8 func, u64 offset, u8 tx_len, u8 len)
+{
+ struct peci_request *req;
+ int ret;
+
+ req = peci_request_alloc(device, tx_len, PECI_RDENDPTCFG_RD_LEN_BASE + len);
+ if (!req)
+ return ERR_PTR(-ENOMEM);
+
+ req->tx.buf[0] = PECI_RDENDPTCFG_CMD;
+ req->tx.buf[1] = 0;
+ req->tx.buf[2] = PECI_ENDPTCFG_TYPE_MMIO;
+ req->tx.buf[3] = 0; /* Endpoint ID */
+ req->tx.buf[4] = 0; /* Reserved */
+ req->tx.buf[5] = bar;
+ req->tx.buf[6] = addr_type;
+ req->tx.buf[7] = seg; /* PCI Segment */
+ req->tx.buf[8] = PCI_DEVFN(dev, func);
+ req->tx.buf[9] = bus; /* PCI Bus */
+
+ if (addr_type == PECI_ENDPTCFG_ADDR_TYPE_MMIO_D)
+ put_unaligned_le32(offset, &req->tx.buf[10]);
+ else
+ put_unaligned_le64(offset, &req->tx.buf[10]);
+
+ ret = peci_request_xfer_retry(req);
+ if (ret) {
+ peci_request_free(req);
+ return ERR_PTR(ret);
+ }
+
+ return req;
+}
+
u8 peci_request_data_readb(struct peci_request *req)
{
return req->rx.buf[1];
@@ -256,6 +423,12 @@ u64 peci_request_dib_read(struct peci_request *req)
}
EXPORT_SYMBOL_NS_GPL(peci_request_dib_read, PECI);
+s16 peci_request_temp_read(struct peci_request *req)
+{
+ return get_unaligned_le16(&req->rx.buf[0]);
+}
+EXPORT_SYMBOL_NS_GPL(peci_request_temp_read, PECI);
+
#define __read_pkg_config(x, type) \
struct peci_request *peci_xfer_pkg_cfg_##x(struct peci_device *device, u8 index, u16 param) \
{ \
@@ -267,3 +440,43 @@ __read_pkg_config(readb, u8);
__read_pkg_config(readw, u16);
__read_pkg_config(readl, u32);
__read_pkg_config(readq, u64);
+
+#define __read_pci_config_local(x, type) \
+struct peci_request * \
+peci_xfer_pci_cfg_local_##x(struct peci_device *device, u8 bus, u8 dev, u8 func, u16 reg) \
+{ \
+ return __pci_cfg_local_read(device, bus, dev, func, reg, sizeof(type)); \
+} \
+EXPORT_SYMBOL_NS_GPL(peci_xfer_pci_cfg_local_##x, PECI)
+
+__read_pci_config_local(readb, u8);
+__read_pci_config_local(readw, u16);
+__read_pci_config_local(readl, u32);
+
+#define __read_ep_pci_config(x, msg_type, type) \
+struct peci_request * \
+peci_xfer_ep_pci_cfg_##x(struct peci_device *device, u8 seg, u8 bus, u8 dev, u8 func, u16 reg) \
+{ \
+ return __ep_pci_cfg_read(device, msg_type, seg, bus, dev, func, reg, sizeof(type)); \
+} \
+EXPORT_SYMBOL_NS_GPL(peci_xfer_ep_pci_cfg_##x, PECI)
+
+__read_ep_pci_config(local_readb, PECI_ENDPTCFG_TYPE_LOCAL_PCI, u8);
+__read_ep_pci_config(local_readw, PECI_ENDPTCFG_TYPE_LOCAL_PCI, u16);
+__read_ep_pci_config(local_readl, PECI_ENDPTCFG_TYPE_LOCAL_PCI, u32);
+__read_ep_pci_config(readb, PECI_ENDPTCFG_TYPE_PCI, u8);
+__read_ep_pci_config(readw, PECI_ENDPTCFG_TYPE_PCI, u16);
+__read_ep_pci_config(readl, PECI_ENDPTCFG_TYPE_PCI, u32);
+
+#define __read_ep_mmio(x, y, addr_type, type1, type2) \
+struct peci_request *peci_xfer_ep_mmio##y##_##x(struct peci_device *device, u8 bar, u8 seg, \
+ u8 bus, u8 dev, u8 func, u64 offset) \
+{ \
+ return __ep_mmio_read(device, bar, addr_type, seg, bus, dev, func, \
+ offset, PECI_RDENDPTCFG_MMIO_WR_LEN_BASE + sizeof(type1), \
+ sizeof(type2)); \
+} \
+EXPORT_SYMBOL_NS_GPL(peci_xfer_ep_mmio##y##_##x, PECI)
+
+__read_ep_mmio(readl, 32, PECI_ENDPTCFG_ADDR_TYPE_MMIO_D, u32, u32);
+__read_ep_mmio(readl, 64, PECI_ENDPTCFG_ADDR_TYPE_MMIO_Q, u64, u32);
diff --git a/include/linux/peci-cpu.h b/include/linux/peci-cpu.h
new file mode 100644
index 000000000000..ff8ae9c26c80
--- /dev/null
+++ b/include/linux/peci-cpu.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (c) 2021 Intel Corporation */
+
+#ifndef __LINUX_PECI_CPU_H
+#define __LINUX_PECI_CPU_H
+
+#include <linux/types.h>
+
+#include "../../arch/x86/include/asm/intel-family.h"
+
+#define PECI_PCS_PKG_ID 0 /* Package Identifier Read */
+#define PECI_PKG_ID_CPU_ID 0x0000 /* CPUID Info */
+#define PECI_PKG_ID_PLATFORM_ID 0x0001 /* Platform ID */
+#define PECI_PKG_ID_DEVICE_ID 0x0002 /* Uncore Device ID */
+#define PECI_PKG_ID_MAX_THREAD_ID 0x0003 /* Max Thread ID */
+#define PECI_PKG_ID_MICROCODE_REV 0x0004 /* CPU Microcode Update Revision */
+#define PECI_PKG_ID_MCA_ERROR_LOG 0x0005 /* Machine Check Status */
+#define PECI_PCS_MODULE_TEMP 9 /* Per Core DTS Temperature Read */
+#define PECI_PCS_THERMAL_MARGIN 10 /* DTS thermal margin */
+#define PECI_PCS_DDR_DIMM_TEMP 14 /* DDR DIMM Temperature */
+#define PECI_PCS_TEMP_TARGET 16 /* Temperature Target Read */
+#define PECI_PCS_TDP_UNITS 30 /* Units for power/energy registers */
+
+struct peci_device;
+
+int peci_temp_read(struct peci_device *device, s16 *temp_raw);
+
+int peci_pcs_read(struct peci_device *device, u8 index,
+ u16 param, u32 *data);
+
+int peci_pci_local_read(struct peci_device *device, u8 bus, u8 dev,
+ u8 func, u16 reg, u32 *data);
+
+int peci_ep_pci_local_read(struct peci_device *device, u8 seg,
+ u8 bus, u8 dev, u8 func, u16 reg, u32 *data);
+
+int peci_mmio_read(struct peci_device *device, u8 bar, u8 seg,
+ u8 bus, u8 dev, u8 func, u64 address, u32 *data);
+
+#endif /* __LINUX_PECI_CPU_H */
diff --git a/include/linux/peci.h b/include/linux/peci.h
index 4eda423ba10c..06e6ef935297 100644
--- a/include/linux/peci.h
+++ b/include/linux/peci.h
@@ -14,14 +14,6 @@
*/
#define PECI_REQUEST_MAX_BUF_SIZE 32
-#define PECI_PCS_PKG_ID 0 /* Package Identifier Read */
-#define PECI_PKG_ID_CPU_ID 0x0000 /* CPUID Info */
-#define PECI_PKG_ID_PLATFORM_ID 0x0001 /* Platform ID */
-#define PECI_PKG_ID_DEVICE_ID 0x0002 /* Uncore Device ID */
-#define PECI_PKG_ID_MAX_THREAD_ID 0x0003 /* Max Thread ID */
-#define PECI_PKG_ID_MICROCODE_REV 0x0004 /* CPU Microcode Update Revision */
-#define PECI_PKG_ID_MCA_ERROR_LOG 0x0005 /* Machine Check Status */
-
struct peci_controller;
struct peci_request;
--
2.34.1
Powered by blists - more mailing lists