linux-kernel - [PATCH 1/2] arm64: dts: qcom: c630: Add backlight controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220208041606.144039-1-bjorn.andersson@linaro.org>
Date:   Mon,  7 Feb 2022 22:16:05 -0600
From:   Bjorn Andersson <bjorn.andersson@...aro.org>
To:     Bjorn Andersson <bjorn.andersson@...aro.org>,
        Steev Klimaszewski <steev@...i.org>
Cc:     Rob Herring <robh+dt@...nel.org>, linux-arm-msm@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 1/2] arm64: dts: qcom: c630: Add backlight controller

The Lenovo Yoga C630 uses the PWM controller in the TI SN65DSI86 bridge
chip to provide a signal for the backlight control and has TLMM GPIO 11
attached to some regulator that drives the backlight.

Unfortunately the regulator attached to this gpio is also powering the
camera, so turning off backlight result in the detachment of the camera
as well.

Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
---
 arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 58845a14805f..55fb7302245b 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -59,6 +59,7 @@ mode {
 	panel {
 		compatible = "boe,nv133fhm-n61";
 		no-hpd;
+		backlight = <&backlight>;
 
 		ports {
 			port {
@@ -98,6 +99,12 @@ sn65dsi86_refclk: sn65dsi86-refclk {
 
 		clock-frequency = <19200000>;
 	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&sn65dsi86 1000000>;
+		enable-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &adsp_pas {
@@ -419,6 +426,7 @@ sn65dsi86: bridge@2c {
 		clock-names = "refclk";
 
 		no-hpd;
+		#pwm-cells = <1>;
 
 		ports {
 			#address-cells = <1>;
-- 
2.32.0