[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <300f9ec9-da52-235f-ea3c-b49bdc8bfb75@kali.org>
Date: Tue, 8 Feb 2022 06:35:08 -0600
From: Steev Klimaszewski <steev@...i.org>
To: Bjorn Andersson <bjorn.andersson@...aro.org>
Cc: Rob Herring <robh+dt@...nel.org>, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] arm64: dts: qcom: c630: Add backlight controller
On 2/7/22 10:16 PM, Bjorn Andersson wrote:
> The Lenovo Yoga C630 uses the PWM controller in the TI SN65DSI86 bridge
> chip to provide a signal for the backlight control and has TLMM GPIO 11
> attached to some regulator that drives the backlight.
>
> Unfortunately the regulator attached to this gpio is also powering the
> camera, so turning off backlight result in the detachment of the camera
> as well.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> ---
> arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
> index 58845a14805f..55fb7302245b 100644
> --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
> @@ -59,6 +59,7 @@ mode {
> panel {
> compatible = "boe,nv133fhm-n61";
> no-hpd;
> + backlight = <&backlight>;
>
> ports {
> port {
> @@ -98,6 +99,12 @@ sn65dsi86_refclk: sn65dsi86-refclk {
>
> clock-frequency = <19200000>;
> };
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + pwms = <&sn65dsi86 1000000>;
> + enable-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
> + };
> };
>
> &adsp_pas {
> @@ -419,6 +426,7 @@ sn65dsi86: bridge@2c {
> clock-names = "refclk";
>
> no-hpd;
> + #pwm-cells = <1>;
>
> ports {
> #address-cells = <1>;
Tested-by: Steev Klimaszewski <steev@...i.org>
Powered by blists - more mailing lists