[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAASuNyWRh4++uLh4zPuJAuwX4NhYa4HvO1M7iMYdg3Dm0Qbc7Q@mail.gmail.com>
Date: Wed, 9 Feb 2022 12:46:01 -0800
From: Cpp Code <cpp.code.lv@...il.com>
To: Pravin Shelar <pravin.ovn@...il.com>
Cc: Linux Kernel Network Developers <netdev@...r.kernel.org>,
"David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
ovs dev <dev@...nvswitch.org>,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH net-next v8] net: openvswitch: IPv6: Add IPv6 extension
header support
On Thu, Dec 9, 2021 at 11:36 PM Pravin Shelar <pravin.ovn@...il.com> wrote:
>
> ()
>
> On Mon, Dec 6, 2021 at 3:00 PM Cpp Code <cpp.code.lv@...il.com> wrote:
> >
> > On Thu, Dec 2, 2021 at 9:28 PM Pravin Shelar <pravin.ovn@...il.com> wrote:
> > >
> > > On Thu, Dec 2, 2021 at 12:20 PM Cpp Code <cpp.code.lv@...il.com> wrote:
> > > >
> > > > On Wed, Dec 1, 2021 at 11:34 PM Pravin Shelar <pravin.ovn@...il.com> wrote:
> > > > >
> > > > > On Wed, Nov 24, 2021 at 11:33 AM Toms Atteka <cpp.code.lv@...il.com> wrote:
> > > > > >
> > > > > > This change adds a new OpenFlow field OFPXMT_OFB_IPV6_EXTHDR and
> > > > > > packets can be filtered using ipv6_ext flag.
> > > > > >
> > > > > > Signed-off-by: Toms Atteka <cpp.code.lv@...il.com>
> > > > > > ---
> > > > > > include/uapi/linux/openvswitch.h | 6 ++
> > > > > > net/openvswitch/flow.c | 140 +++++++++++++++++++++++++++++++
> > > > > > net/openvswitch/flow.h | 14 ++++
> > > > > > net/openvswitch/flow_netlink.c | 26 +++++-
> > > > > > 4 files changed, 184 insertions(+), 2 deletions(-)
> > > > > >
> > > > > > diff --git a/include/uapi/linux/openvswitch.h b/include/uapi/linux/openvswitch.h
> > > > > > index a87b44cd5590..43790f07e4a2 100644
> > > > > > --- a/include/uapi/linux/openvswitch.h
> > > > > > +++ b/include/uapi/linux/openvswitch.h
> > > > > > @@ -342,6 +342,7 @@ enum ovs_key_attr {
> > > > > > OVS_KEY_ATTR_CT_ORIG_TUPLE_IPV4, /* struct ovs_key_ct_tuple_ipv4 */
> > > > > > OVS_KEY_ATTR_CT_ORIG_TUPLE_IPV6, /* struct ovs_key_ct_tuple_ipv6 */
> > > > > > OVS_KEY_ATTR_NSH, /* Nested set of ovs_nsh_key_* */
> > > > > > + OVS_KEY_ATTR_IPV6_EXTHDRS, /* struct ovs_key_ipv6_exthdr */
> > > > > >
> > > > > > #ifdef __KERNEL__
> > > > > > OVS_KEY_ATTR_TUNNEL_INFO, /* struct ip_tunnel_info */
> > > > > > @@ -421,6 +422,11 @@ struct ovs_key_ipv6 {
> > > > > > __u8 ipv6_frag; /* One of OVS_FRAG_TYPE_*. */
> > > > > > };
> > > > > >
> > > > > > +/* separate structure to support backward compatibility with older user space */
> > > > > > +struct ovs_key_ipv6_exthdrs {
> > > > > > + __u16 hdrs;
> > > > > > +};
> > > > > > +
> > > > > > struct ovs_key_tcp {
> > > > > > __be16 tcp_src;
> > > > > > __be16 tcp_dst;
> > > > > > diff --git a/net/openvswitch/flow.c b/net/openvswitch/flow.c
> > > > > > index 9d375e74b607..28acb40437ca 100644
> > > > > > --- a/net/openvswitch/flow.c
> > > > > > +++ b/net/openvswitch/flow.c
> > > > > > @@ -239,6 +239,144 @@ static bool icmphdr_ok(struct sk_buff *skb)
> > > > > > sizeof(struct icmphdr));
> > > > > > }
> > > > > >
> > > > > > +/**
> > > > > > + * get_ipv6_ext_hdrs() - Parses packet and sets IPv6 extension header flags.
> > > > > > + *
> > > > > > + * @skb: buffer where extension header data starts in packet
> > > > > > + * @nh: ipv6 header
> > > > > > + * @ext_hdrs: flags are stored here
> > > > > > + *
> > > > > > + * OFPIEH12_UNREP is set if more than one of a given IPv6 extension header
> > > > > > + * is unexpectedly encountered. (Two destination options headers may be
> > > > > > + * expected and would not cause this bit to be set.)
> > > > > > + *
> > > > > > + * OFPIEH12_UNSEQ is set if IPv6 extension headers were not in the order
> > > > > > + * preferred (but not required) by RFC 2460:
> > > > > > + *
> > > > > > + * When more than one extension header is used in the same packet, it is
> > > > > > + * recommended that those headers appear in the following order:
> > > > > > + * IPv6 header
> > > > > > + * Hop-by-Hop Options header
> > > > > > + * Destination Options header
> > > > > > + * Routing header
> > > > > > + * Fragment header
> > > > > > + * Authentication header
> > > > > > + * Encapsulating Security Payload header
> > > > > > + * Destination Options header
> > > > > > + * upper-layer header
> > > > > > + */
> > > > > > +static void get_ipv6_ext_hdrs(struct sk_buff *skb, struct ipv6hdr *nh,
> > > > > > + u16 *ext_hdrs)
> > > > > > +{
> > > > > > + u8 next_type = nh->nexthdr;
> > > > > > + unsigned int start = skb_network_offset(skb) + sizeof(struct ipv6hdr);
> > > > > > + int dest_options_header_count = 0;
> > > > > > +
> > > > > > + *ext_hdrs = 0;
> > > > > > +
> > > > > > + while (ipv6_ext_hdr(next_type)) {
> > > > > > + struct ipv6_opt_hdr _hdr, *hp;
> > > > > > +
> > > > > > + switch (next_type) {
> > > > > > + case IPPROTO_NONE:
> > > > > > + *ext_hdrs |= OFPIEH12_NONEXT;
> > > > > > + /* stop parsing */
> > > > > > + return;
> > > > > > +
> > > > > > + case IPPROTO_ESP:
> > > > > > + if (*ext_hdrs & OFPIEH12_ESP)
> > > > > > + *ext_hdrs |= OFPIEH12_UNREP;
> > > > > > + if ((*ext_hdrs & ~(OFPIEH12_HOP | OFPIEH12_DEST |
> > > > > > + OFPIEH12_ROUTER | IPPROTO_FRAGMENT |
> > > > > > + OFPIEH12_AUTH | OFPIEH12_UNREP)) ||
> > > > > > + dest_options_header_count >= 2) {
> > > > > > + *ext_hdrs |= OFPIEH12_UNSEQ;
> > > > > > + }
> > > > > > + *ext_hdrs |= OFPIEH12_ESP;
> > > > > > + break;
> > > > > you need to check_header() before looking into each extension header.
> > > >
> > > > Could you elaborate why I need to add check_header(),
> > > > skb_header_pointer() is doing sanitization.
> > >
> > > I mean check_header() would allow you to read the header without
> > > copying the bits, it is used in ovs flow extraction so its usual
> > > check.
> >
> > But check_header() will call *__pskb_pull_tail which in turn will copy
> > bits if data will be fragmented.
> >
> OVS flow extract uses this function to extract flow upto L4, so
> skb_header_pointer() is not saving any copy operation.
>
> > /* Moves tail of skb head forward, copying data from fragmented part,
> > * when it is necessary.
> > * 1. It may fail due to malloc failure.
> > * 2. It may change skb pointers.
> > *
> > * It is pretty complicated. Luckily, it is called only in exceptional cases.
> > */
> > void *__pskb_pull_tail(struct sk_buff *skb, int delta)
> >
> > as well I noticed that for example commit
> > 4a06fa67c4da20148803525151845276cdb995c1 is moving from
> > pskb_may_pull() to skb_header_pointer()
> ok, I see advantage of using skb_header_pointer() in this case, but
> replacing all check_header() with skb_header_pointer() would add lot
> of copy operation in flow extract. Anyways for this use case
> skb_header_pointer() is fine.
>
> Acked-by: Pravin B Shelar <pshelar@....org>
Hi,
Could this be applied please.
Thanks,
Tom
Powered by blists - more mailing lists