[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1644372408-5485-1-git-send-email-hongxing.zhu@nxp.com>
Date: Wed, 9 Feb 2022 10:06:48 +0800
From: Richard Zhu <hongxing.zhu@....com>
To: bhelgaas@...gle.com, shawnguo@...nel.org, l.stach@...gutronix.de
Cc: hongxing.zhu@....com, linux-pci@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
kernel@...gutronix.de, linux-imx@....com
Subject: [PATCH v2] arm64: dts: imx8mq-evk: Add second PCIe port support
Enable the second PCIe port support on i.MX8MQ EVK board.
Signed-off-by: Richard Zhu <hongxing.zhu@....com>
---
arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 38 ++++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index a1b7582f3ecf..06f6e44da4d4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -27,6 +27,17 @@ pcie0_refclk: pcie0-refclk {
clock-frequency = <100000000>;
};
+ reg_pcie1: regulator-pcie {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie1_reg>;
+ regulator-name = "MPCIE_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_usdhc2_vmmc: regulator-vsd-3v3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usdhc2>;
@@ -327,6 +338,20 @@ &pcie0 {
status = "okay";
};
+&pcie1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie1>;
+ reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>;
+ clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+ <&clk IMX8MQ_CLK_PCIE2_AUX>,
+ <&clk IMX8MQ_CLK_PCIE2_PHY>,
+ <&pcie0_refclk>;
+ clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+ vpcie-supply = <®_pcie1>;
+ vph-supply = <&vgen5_reg>;
+ status = "okay";
+};
+
&pgc_gpu {
power-supply = <&sw1a_reg>;
};
@@ -482,6 +507,19 @@ MX8MQ_IOMUXC_UART4_RXD_GPIO5_IO28 0x16
>;
};
+ pinctrl_pcie1: pcie1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C4_SDA_PCIE2_CLKREQ_B 0x76
+ MX8MQ_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x16
+ >;
+ };
+
+ pinctrl_pcie1_reg: pcie1reggrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_ECSPI2_SCLK_GPIO5_IO10 0x16
+ >;
+ };
+
pinctrl_qspi: qspigrp {
fsl,pins = <
MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82
--
2.25.1
Powered by blists - more mailing lists