[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <e5533bed-79ab-7d72-b0e2-47b038bdbbeb@microchip.com>
Date: Thu, 10 Feb 2022 07:59:35 +0000
From: <Tudor.Ambarus@...rochip.com>
To: <Kavyasree.Kotagiri@...rochip.com>, <Nicolas.Ferre@...rochip.com>,
<alexandre.belloni@...tlin.com>, <Ludovic.Desroches@...rochip.com>,
<robh+dt@...nel.org>, <lee.jones@...aro.org>
CC: <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<UNGLinuxDriver@...rochip.com>, <Manohar.Puri@...rochip.com>
Subject: Re: [PATCH 2/2] mfd: atmel-flexcom: Add support for lan966 flexcom
shared configurations
On 2/10/22 09:45, Kavyasree Kotagiri wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> Each flexcom of LAN966 SoC has 2 chip selects. For each chip
> select of each flexcom there is a configuration register
> FLEXCOM_SHARED[0-4]:SS_MASK[0-1]. The width of configuration
> register is 21 because there are 21 shared pins on each of
> which the chip select can be mapped. Each bit of the register
> represents a different FLEXCOM_SHARED pin.
>
> Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@...rochip.com>
> ---
> drivers/mfd/atmel-flexcom.c | 49 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 49 insertions(+)
>
> diff --git a/drivers/mfd/atmel-flexcom.c b/drivers/mfd/atmel-flexcom.c
> index 559eb4d352b6..b8fc476e411d 100644
> --- a/drivers/mfd/atmel-flexcom.c
> +++ b/drivers/mfd/atmel-flexcom.c
> @@ -27,6 +27,12 @@
> #define FLEX_MR_OPMODE_MASK (0x3 << FLEX_MR_OPMODE_OFFSET)
> #define FLEX_MR_OPMODE(opmode) (((opmode) << FLEX_MR_OPMODE_OFFSET) & \
> FLEX_MR_OPMODE_MASK)
> +#ifdef CONFIG_SOC_LAN966
> +/* LAN966 register offsets */
> +#define FLEX_SHRD_SS_MASK_0 0x0
> +#define FLEX_SHRD_SS_MASK_1 0x4
> +#define FLEX_SHRD_MASK 0x1FFFFF
> +#endif
>
> struct atmel_flexcom {
> void __iomem *base;
> @@ -39,6 +45,10 @@ static int atmel_flexcom_probe(struct platform_device *pdev)
> struct device_node *np = pdev->dev.of_node;
> struct resource *res;
> struct atmel_flexcom *ddata;
> +#ifdef CONFIG_SOC_LAN966
> + u32 lan966x_ss_pin, lan966x_cs, val;
> + void __iomem *shared_base;
> +#endif
> int err;
>
> ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
> @@ -76,6 +86,45 @@ static int atmel_flexcom_probe(struct platform_device *pdev)
> */
> writel(FLEX_MR_OPMODE(ddata->opmode), ddata->base + FLEX_MR);
>
> +#ifdef CONFIG_SOC_LAN966
this may be better handled via a dedicated compatible to which you
associate a capabilities structure and use the caps to avoid ifdefery
throughout the code.
Cheers,
ta
> + /*
> + * Flexcom Shared Register Configurations:
> + * In order to map chip select index X of Flexcom Y to FLEXCOM_SHARED Z,
> + * write 0 to bit index Z of FLEXCOM_SHARED[Y]:SS_MASK[X].
> + */
> + if (of_property_read_bool(np, "lan966x-flx-shared-cfg")) {
> + /* Shared pin */
> + err = of_property_read_u32(np, "lan966x-ss-pin", &lan966x_ss_pin);
> + if (err)
> + return err;
> +
> + if (lan966x_ss_pin > 20)
> + return -EINVAL;
> +
> + /* chip-select */
> + err = of_property_read_u32(np, "lan966x-cs", &lan966x_cs);
> + if (err)
> + return err;
> +
> + if (lan966x_cs > 1)
> + return -EINVAL;
> +
> + shared_base = devm_ioremap_resource(&pdev->dev,
> + platform_get_resource(pdev, IORESOURCE_MEM, 1));
> + if (IS_ERR(shared_base)) {
> + dev_dbg(&pdev->dev, "No Flexcom shared register config\n");
> + return PTR_ERR(shared_base);
> + }
> +
> + val = ~(1 << lan966x_ss_pin) & FLEX_SHRD_MASK;
> +
> + if (lan966x_cs == 0)
> + writel(val, shared_base + FLEX_SHRD_SS_MASK_0);
> + else
> + writel(val, shared_base + FLEX_SHRD_SS_MASK_1);
> + }
> +#endif
> +
> clk_disable_unprepare(ddata->clk);
>
> return devm_of_platform_populate(&pdev->dev);
> --
> 2.17.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Powered by blists - more mailing lists