linux-kernel - [PATCH 2/2] staging: r8188eu: remove unused enums from ieee80211.h

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-Id: <20220210100514.8506-3-straube.linux@gmail.com>
Date:   Thu, 10 Feb 2022 11:05:14 +0100
From:   Michael Straube <straube.linux@...il.com>
To:     gregkh@...uxfoundation.org
Cc:     Larry.Finger@...inger.net, phil@...lpotter.co.uk,
        linux-staging@...ts.linux.dev, linux-kernel@...r.kernel.org,
        Michael Straube <straube.linux@...il.com>
Subject: [PATCH 2/2] staging: r8188eu: remove unused enums from ieee80211.h

There are some unused enums in the ieee80211.h header. Remove them.

Signed-off-by: Michael Straube <straube.linux@...il.com>
---
 drivers/staging/r8188eu/include/ieee80211.h | 66 ---------------------
 1 file changed, 66 deletions(-)

diff --git a/drivers/staging/r8188eu/include/ieee80211.h b/drivers/staging/r8188eu/include/ieee80211.h
index f3b20215ca94..1793b99feb9f 100644
--- a/drivers/staging/r8188eu/include/ieee80211.h
+++ b/drivers/staging/r8188eu/include/ieee80211.h
@@ -226,14 +226,6 @@ struct rtw_ieee80211_hdr_3addr_qos {
 	u16     qc;
 }  __packed;
 
-enum eap_type {
-	EAP_PACKET = 0,
-	EAPOL_START,
-	EAPOL_LOGOFF,
-	EAPOL_KEY,
-	EAPOL_ENCAP_ASF_ALERT
-};
-
 #define IEEE80211_3ADDR_LEN 24
 #define IEEE80211_4ADDR_LEN 30
 #define IEEE80211_FCS_LEN    4
@@ -626,44 +618,6 @@ Total: 28-2340 bytes
 > 0: TID
 */
 
-enum ieee80211_state {
-	/* the card is not linked at all */
-	IEEE80211_NOLINK = 0,
-
-	/* IEEE80211_ASSOCIATING* are for BSS client mode
-	 * the driver shall not perform RX filtering unless
-	 * the state is LINKED.
-	 * The driver shall just check for the state LINKED and
-	 * defaults to NOLINK for ALL the other states (including
-	 * LINKED_SCANNING)
-	 */
-
-	/* the association procedure will start (wq scheduling)*/
-	IEEE80211_ASSOCIATING,
-	IEEE80211_ASSOCIATING_RETRY,
-
-	/* the association procedure is sending AUTH request*/
-	IEEE80211_ASSOCIATING_AUTHENTICATING,
-
-	/* the association procedure has successfully authentcated
-	 * and is sending association request
-	 */
-	IEEE80211_ASSOCIATING_AUTHENTICATED,
-
-	/* the link is ok. the card associated to a BSS or linked
-	 * to a ibss cell or acting as an AP and creating the bss
-	 */
-	IEEE80211_LINKED,
-
-	/* same as LINKED, but the driver shall apply RX filter
-	 * rules as we are in NO_LINK mode. As the card is still
-	 * logically linked, but it is doing a syncro site survey
-	 * then it will be back to LINKED state.
-	 */
-	IEEE80211_LINKED_SCANNING,
-
-};
-
 #define DEFAULT_MAX_SCAN_AGE (15 * HZ)
 #define DEFAULT_FTS 2346
 
@@ -741,26 +695,6 @@ enum rtw_ieee80211_back_actioncode {
 	RTW_WLAN_ACTION_DELBA = 2,
 };
 
-/* HT features action code */
-enum rtw_ieee80211_ht_actioncode {
-	RTW_WLAN_ACTION_NOTIFY_CH_WIDTH = 0,
-	RTW_WLAN_ACTION_SM_PS = 1,
-	RTW_WLAN_ACTION_PSPM = 2,
-	RTW_WLAN_ACTION_PCO_PHASE = 3,
-	RTW_WLAN_ACTION_MIMO_CSI_MX = 4,
-	RTW_WLAN_ACTION_MIMO_NONCP_BF = 5,
-	RTW_WLAN_ACTION_MIMP_CP_BF = 6,
-	RTW_WLAN_ACTION_ASEL_INDICATES_FB = 7,
-	RTW_WLAN_ACTION_HI_INFO_EXCHG = 8,
-};
-
-/* BACK (block-ack) parties */
-enum rtw_ieee80211_back_parties {
-	RTW_WLAN_BACK_RECIPIENT = 0,
-	RTW_WLAN_BACK_INITIATOR = 1,
-	RTW_WLAN_BACK_TIMER = 2,
-};
-
 #define OUI_MICROSOFT 0x0050f2 /* Microsoft (also used in Wi-Fi specs)
 				* 00:50:F2 */
 #define WME_OUI_TYPE 2
-- 
2.35.1