[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAAOTY__gw5GZT3+=R4CiaVX=DTRGTs2vtOvXxV6v+tw7LwnU2g@mail.gmail.com>
Date: Thu, 10 Feb 2022 22:47:05 +0800
From: Chun-Kuang Hu <chunkuang.hu@...nel.org>
To: Julien STEPHAN <jstephan@...libre.com>
Cc: CK Hu <ck.hu@...iatek.com>,
Mattijs Korpershoek <mkorpershoek@...libre.com>,
Chun-Kuang Hu <chunkuang.hu@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Matthias Brugger <matthias.bgg@...il.com>,
"open list:DRM DRIVERS FOR MEDIATEK"
<dri-devel@...ts.freedesktop.org>,
"moderated list:DRM DRIVERS FOR MEDIATEK"
<linux-mediatek@...ts.infradead.org>,
"moderated list:ARM/Mediatek SoC support"
<linux-arm-kernel@...ts.infradead.org>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2] drm/mediatek: allow commands to be sent during video mode
Hi, Julien:
Julien STEPHAN <jstephan@...libre.com> 於 2022年2月10日 週四 下午8:47寫道:
>
> Mipi dsi panel drivers can use mipi_dsi_dcs_{set,get}_display_brightness()
> to request backlight changes.
>
> This can be done during panel initialization (dsi is in command mode)
> or afterwards (dsi is in Video Mode).
>
> When the DSI is in Video Mode, all commands are rejected.
>
> Detect current DSI mode in mtk_dsi_host_transfer() and switch modes
> temporarily to allow commands to be sent.
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@...nel.org>
>
> Signed-off-by: Julien STEPHAN <jstephan@...libre.com>
> Signed-off-by: Mattijs Korpershoek <mkorpershoek@...libre.com>
> ---
> Changes in v2:
> - update commit message to be more descriptive
>
> drivers/gpu/drm/mediatek/mtk_dsi.c | 34 ++++++++++++++++++++++--------
> 1 file changed, 25 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index 5d90d2eb0019..7d66fdc7f81d 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -891,24 +891,34 @@ static ssize_t mtk_dsi_host_transfer(struct mipi_dsi_host *host,
> u8 read_data[16];
> void *src_addr;
> u8 irq_flag = CMD_DONE_INT_FLAG;
> -
> - if (readl(dsi->regs + DSI_MODE_CTRL) & MODE) {
> - DRM_ERROR("dsi engine is not command mode\n");
> - return -EINVAL;
> + u32 dsi_mode;
> +
> + dsi_mode = readl(dsi->regs + DSI_MODE_CTRL);
> + if (dsi_mode & MODE) {
> + mtk_dsi_stop(dsi);
> + if (mtk_dsi_switch_to_cmd_mode(dsi, VM_DONE_INT_FLAG, 500)) {
> + recv_cnt = -EINVAL;
> + goto restore_dsi_mode;
> + }
> }
>
> if (MTK_DSI_HOST_IS_READ(msg->type))
> irq_flag |= LPRX_RD_RDY_INT_FLAG;
>
> - if (mtk_dsi_host_send_cmd(dsi, msg, irq_flag) < 0)
> - return -ETIME;
> + if (mtk_dsi_host_send_cmd(dsi, msg, irq_flag) < 0) {
> + recv_cnt = -ETIME;
> + goto restore_dsi_mode;
> + }
>
> - if (!MTK_DSI_HOST_IS_READ(msg->type))
> - return 0;
> + if (!MTK_DSI_HOST_IS_READ(msg->type)) {
> + recv_cnt = 0;
> + goto restore_dsi_mode;
> + }
>
> if (!msg->rx_buf) {
> DRM_ERROR("dsi receive buffer size may be NULL\n");
> - return -EINVAL;
> + recv_cnt = -EINVAL;
> + goto restore_dsi_mode;
> }
>
> for (i = 0; i < 16; i++)
> @@ -933,6 +943,12 @@ static ssize_t mtk_dsi_host_transfer(struct mipi_dsi_host *host,
> DRM_INFO("dsi get %d byte data from the panel address(0x%x)\n",
> recv_cnt, *((u8 *)(msg->tx_buf)));
>
> +restore_dsi_mode:
> + if (dsi_mode & MODE) {
> + mtk_dsi_set_mode(dsi);
> + mtk_dsi_start(dsi);
> + }
> +
> return recv_cnt;
> }
>
> --
> 2.35.1
>
Powered by blists - more mailing lists