[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220211191238.2142-1-kabel@kernel.org>
Date: Fri, 11 Feb 2022 20:12:32 +0100
From: Marek Behún <kabel@...nel.org>
To: Stephen Boyd <sboyd@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Gregory Clement <gregory.clement@...tlin.com>
Cc: Pali Rohár <pali@...nel.org>,
linux-clk@...r.kernel.org, linux-serial@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Marek Behún <kabel@...nel.org>
Subject: [PATCH v8 0/6] serial: mvebu-uart: Support for higher baudrates
Hello Greg, Stephen, Gregory,
at Pali's request I have reviewed, updated and tested his series adding
support for higher baudrates on Marvell Armada A37xx boards.
I have updated commit messages, some comments and indentation at some
places. As per Stephen Boyd's request, commit message of patch 3 now
contains more information about why we need to have UART
clock-controller binding defined in such a way (due to backwards
compatibility).
Marek
Changes in v7:
* fixed lint errors in yaml binding file
* added Reviewed-by tags
* changed commit messages and comments a little
* fixed indentation at some places
* swapped patch 2 and 3 (dt-binding defining new binding should go
before the driver adding usage of that new binding)
Changes in v6:
* fixed yaml binding file and dts files
Changes in v5:
* fixed yaml binding file
Changes in v4:
* converted armada3700-uart-clock documentation to YAML
* split documentation changes into two commits:
- first which adds clock documentation
- second which updates UART documentation
Changes in v3:
v3 is rebased on top of Linus master branch and all already applied patches
were dropped. There are no changes in patches itself since v2.
Pali Rohár (6):
math64: New DIV_U64_ROUND_CLOSEST helper
dt-bindings: mvebu-uart: document DT bindings for
marvell,armada-3700-uart-clock
serial: mvebu-uart: implement UART clock driver for configuring UART
base clock
dt-bindings: mvebu-uart: update information about UART clock
arm64: dts: marvell: armada-37xx: add device node for UART clock and
use it
serial: mvebu-uart: implement support for baudrates higher than 230400
Bd
.../clock/marvell,armada-3700-uart-clock.yaml | 59 ++
.../devicetree/bindings/serial/mvebu-uart.txt | 9 +-
arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 14 +-
drivers/tty/serial/Kconfig | 1 +
drivers/tty/serial/mvebu-uart.c | 596 +++++++++++++++++-
include/linux/math64.h | 13 +
6 files changed, 671 insertions(+), 21 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml
--
2.34.1
Powered by blists - more mailing lists