| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220211061158.227688-2-ebiggers@kernel.org>
Date: Thu, 10 Feb 2022 22:11:52 -0800
From: Eric Biggers <ebiggers@...nel.org>
To: linux-fsdevel@...r.kernel.org
Cc: linux-ext4@...r.kernel.org, linux-f2fs-devel@...ts.sourceforge.net,
linux-xfs@...r.kernel.org, linux-api@...r.kernel.org,
linux-fscrypt@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [RFC PATCH 1/7] statx: add I/O alignment information
From: Eric Biggers <ebiggers@...gle.com>
Traditionally, the conditions for when DIO (direct I/O) is supported
were fairly simple: filesystems either supported DIO aligned to the
block device's logical block size, or didn't support DIO at all.
However, due to filesystem features that have been added over time (e.g,
data journalling, inline data, encryption, verity, compression,
checkpoint disabling, log-structured mode), the conditions for when DIO
is allowed on a file have gotten increasingly complex. Whether a
particular file supports DIO, and with what alignment, can depend on
various file attributes and filesystem mount options, as well as which
block device(s) the file's data is located on.
XFS has an ioctl XFS_IOC_DIOINFO which exposes this information to
applications. However, as discussed
(https://lore.kernel.org/linux-fsdevel/20220120071215.123274-1-ebiggers@kernel.org/T/#u),
this ioctl is rarely used and not known to be used outside of
XFS-specific code. It also was never intended to indicate when a file
doesn't support DIO at all, and it only exposes the minimum I/O
alignment, not the optimal I/O alignment which has been requested too.
Therefore, let's expose this information via statx(). Add the
STATX_IOALIGN flag and three fields associated with it:
* stx_mem_align_dio: the alignment (in bytes) required for user memory
buffers for DIO, or 0 if DIO is not supported on the file.
* stx_offset_align_dio: the alignment (in bytes) required for file
offsets and I/O segment lengths for DIO, or 0 if DIO is not supported
on the file. This will only be nonzero if stx_mem_align_dio is
nonzero, and vice versa.
* stx_offset_align_optimal: the alignment (in bytes) suggested for file
offsets and I/O segment lengths to get optimal performance. This
applies to both DIO and buffered I/O. It differs from stx_blocksize
in that stx_offset_align_optimal will contain the real optimum I/O
size, which may be a large value. In contrast, for compatibility
reasons stx_blocksize is the minimum size needed to avoid page cache
read/write/modify cycles, which may be much smaller than the optimum
I/O size. For more details about the motivation for this field, see
https://lore.kernel.org/r/20220210040304.GM59729@dread.disaster.area
Note that as with other statx() extensions, if STATX_IOALIGN isn't set
in the returned statx struct, then these new fields won't be filled in.
This will happen if the filesystem doesn't support STATX_IOALIGN, or if
the file isn't a regular file. (It might be supported on block device
files in the future.) It might also happen if the caller didn't include
STATX_IOALIGN in the request mask, since statx() isn't required to
return information that wasn't requested.
This commit adds the VFS-level plumbing for STATX_IOALIGN. Individual
filesystems will still need to add code to support it.
Signed-off-by: Eric Biggers <ebiggers@...gle.com>
---
fs/stat.c | 3 +++
include/linux/stat.h | 3 +++
include/uapi/linux/stat.h | 9 +++++++--
3 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/fs/stat.c b/fs/stat.c
index 28d2020ba1f42..093c506e69c7b 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -598,6 +598,9 @@ cp_statx(const struct kstat *stat, struct statx __user *buffer)
tmp.stx_dev_major = MAJOR(stat->dev);
tmp.stx_dev_minor = MINOR(stat->dev);
tmp.stx_mnt_id = stat->mnt_id;
+ tmp.stx_mem_align_dio = stat->mem_align_dio;
+ tmp.stx_offset_align_dio = stat->offset_align_dio;
+ tmp.stx_offset_align_optimal = stat->offset_align_optimal;
return copy_to_user(buffer, &tmp, sizeof(tmp)) ? -EFAULT : 0;
}
diff --git a/include/linux/stat.h b/include/linux/stat.h
index 7df06931f25d8..48b8b1ad1567c 100644
--- a/include/linux/stat.h
+++ b/include/linux/stat.h
@@ -50,6 +50,9 @@ struct kstat {
struct timespec64 btime; /* File creation time */
u64 blocks;
u64 mnt_id;
+ u32 mem_align_dio;
+ u32 offset_align_dio;
+ u32 offset_align_optimal;
};
#endif
diff --git a/include/uapi/linux/stat.h b/include/uapi/linux/stat.h
index 1500a0f58041a..f822b23e81091 100644
--- a/include/uapi/linux/stat.h
+++ b/include/uapi/linux/stat.h
@@ -124,9 +124,13 @@ struct statx {
__u32 stx_dev_minor;
/* 0x90 */
__u64 stx_mnt_id;
- __u64 __spare2;
+ __u32 stx_mem_align_dio; /* Memory buffer alignment for direct I/O */
+ __u32 stx_offset_align_dio; /* File offset alignment for direct I/O */
/* 0xa0 */
- __u64 __spare3[12]; /* Spare space for future expansion */
+ __u32 stx_offset_align_optimal; /* Optimal file offset alignment for I/O */
+ __u32 __spare2;
+ /* 0xa8 */
+ __u64 __spare3[11]; /* Spare space for future expansion */
/* 0x100 */
};
@@ -152,6 +156,7 @@ struct statx {
#define STATX_BASIC_STATS 0x000007ffU /* The stuff in the normal stat struct */
#define STATX_BTIME 0x00000800U /* Want/got stx_btime */
#define STATX_MNT_ID 0x00001000U /* Got stx_mnt_id */
+#define STATX_IOALIGN 0x00002000U /* Want/got IO alignment info */
#define STATX__RESERVED 0x80000000U /* Reserved for future struct statx expansion */
base-commit: cdaa1b1941f667814300799ddb74f3079517cd5a
--
2.35.1
Powered by blists - more mailing lists