linux-kernel - [PATCH v2 1/2] ARM: dts: imx6qp-sabresd: Enable PCIe support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1644564779-8448-1-git-send-email-hongxing.zhu@nxp.com>
Date:   Fri, 11 Feb 2022 15:32:58 +0800
From:   Richard Zhu <hongxing.zhu@....com>
To:     l.stach@...gutronix.de, bhelgaas@...gle.com,
        lorenzo.pieralisi@....com, shawnguo@...nel.org
Cc:     hongxing.zhu@....com, linux-pci@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        kernel@...gutronix.de, linux-imx@....com
Subject: [PATCH v2 1/2] ARM: dts: imx6qp-sabresd: Enable PCIe support

In the i.MX6QP sabresd board(sch-28857) design, one external oscillator
is used as the PCIe reference clock source by the endpoint device.

If RC uses this oscillator as reference clock too, PLL6(ENET PLL) would
has to be in bypass mode, and ENET clocks would be messed up.

To keep things simple, let RC use the internal PLL as reference clock
and always enable the external oscillator for endpoint device on
i.MX6QP sabresd board.

NOTE: This reference clock setup is used to pass the GEN2 TX compliance
tests, and isn't recommended as a setup in the end-user design.

Signed-off-by: Richard Zhu <hongxing.zhu@....com>
---
 arch/arm/boot/dts/imx6qp-sabresd.dts | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts
index 480e73183f6b..083cf90bcab5 100644
--- a/arch/arm/boot/dts/imx6qp-sabresd.dts
+++ b/arch/arm/boot/dts/imx6qp-sabresd.dts
@@ -50,8 +50,14 @@ MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
 	};
 };

+&vgen3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-always-on;
+};
+
 &pcie {
-	status = "disabled";
+	status = "okay";
 };

 &sata {
-- 
2.25.1