| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220211095057.54979-2-antoniu.miclaus@analog.com>
Date: Fri, 11 Feb 2022 11:50:55 +0200
From: Antoniu Miclaus <antoniu.miclaus@...log.com>
To: <jic23@...nel.org>, <robh+dt@...nel.org>,
<linux-iio@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: Antoniu Miclaus <antoniu.miclaus@...log.com>
Subject: [PATCH 1/3] iio:amplifiers:ada4250: add support for ADA4250
The ADA4250 is an instrumentation amplifier with SPI/pin-strap
progammable gains that is optimized for ultra-low power systems.
With a minimum supply voltage of 1.7V, 26uA of quiescent current,
a shutdown mode, a sleep mode, and a fast wake up settling time,
ADA4250 can be power cycled on a battery powered system for even
futher savings.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@...log.com>
---
drivers/iio/amplifiers/Kconfig | 11 +
drivers/iio/amplifiers/Makefile | 1 +
drivers/iio/amplifiers/ada4250.c | 388 +++++++++++++++++++++++++++++++
3 files changed, 400 insertions(+)
create mode 100644 drivers/iio/amplifiers/ada4250.c
diff --git a/drivers/iio/amplifiers/Kconfig b/drivers/iio/amplifiers/Kconfig
index 5eb1357a9c78..98612e01d9d4 100644
--- a/drivers/iio/amplifiers/Kconfig
+++ b/drivers/iio/amplifiers/Kconfig
@@ -23,6 +23,17 @@ config AD8366
To compile this driver as a module, choose M here: the
module will be called ad8366.
+config ADA4250
+ tristate "Analog Devices ADA4250 Instrumentation Amplifier"
+ depends on SPI
+ help
+ Say yes here to build support for Analog Devices ADA4250
+ SPI Amplifier's support. The driver provides direct access via
+ sysfs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ada4250.
+
config HMC425
tristate "Analog Devices HMC425A and similar GPIO Gain Amplifiers"
depends on GPIOLIB
diff --git a/drivers/iio/amplifiers/Makefile b/drivers/iio/amplifiers/Makefile
index cb551d82f56b..2126331129cf 100644
--- a/drivers/iio/amplifiers/Makefile
+++ b/drivers/iio/amplifiers/Makefile
@@ -5,4 +5,5 @@
# When adding new entries keep the list in alphabetical order
obj-$(CONFIG_AD8366) += ad8366.o
+obj-$(CONFIG_ADA4250) += ada4250.o
obj-$(CONFIG_HMC425) += hmc425a.o
diff --git a/drivers/iio/amplifiers/ada4250.c b/drivers/iio/amplifiers/ada4250.c
new file mode 100644
index 000000000000..10725f6c2751
--- /dev/null
+++ b/drivers/iio/amplifiers/ada4250.c
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ADA4250 driver
+ *
+ * Copyright 2022 Analog Devices Inc.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/device.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+/* ADA4250 Register Map */
+#define ADA4250_REG_GAIN_MUX 0x00
+#define ADA4250_REG_REFBUF_EN 0x01
+#define ADA4250_REG_RESET 0x02
+#define ADA4250_REG_SNSR_CAL_VAL 0x04
+#define ADA4250_REG_SNSR_CAL_CNFG 0x05
+#define ADA4250_REG_DIE_REV 0x18
+#define ADA4250_REG_CHIP_ID 0x19
+
+/* ADA4250_REG_GAIN_MUX Map */
+#define ADA4250_GAIN_MUX_MSK GENMASK(2, 0)
+
+/* ADA4250_REG_REFBUF Map */
+#define ADA4250_REFBUF_MSK BIT(0)
+
+/* ADA4250_REG_RESET Map */
+#define ADA4250_RESET_MSK BIT(0)
+
+/* ADA4250_REG_SNSR_CAL_VAL Map */
+#define ADA4250_SNSR_CAL_VAL_MSK GENMASK(7, 0)
+
+/* ADA4250_REG_SNSR_CAL_CNFG Bit Definition */
+#define ADA4250_BIAS_SET_MSK GENMASK(3, 2)
+#define ADA4250_RANGE_SET_MSK GENMASK(1, 0)
+
+/* Miscellaneous definitions */
+#define ADA4250_CHIP_ID 0x4250
+#define ADA4250_RANGE1 0
+#define ADA4250_RANGE4 3
+
+/* ADA4250 current bias set */
+enum ada4250_current_bias {
+ ADA4250_BIAS_DISABLED,
+ ADA4250_BIAS_BANDGAP,
+ ADA4250_BIAS_AVDD,
+};
+
+struct ada4250_state {
+ struct spi_device *spi;
+ struct regmap *regmap;
+ struct regulator *reg;
+ /* Protect against concurrent accesses to the device and data content */
+ struct mutex lock;
+ u8 bias;
+ u8 gain;
+ int offset_uv;
+ bool refbuf_en;
+};
+
+/* ADA4250 Current Bias Source Settings: Disabled, Bandgap Reference, AVDD */
+static const int calibbias_table[] = {0, 1, 2};
+
+/* ADA4250 Gain (V/V) values: 1, 2, 4, 8, 16, 32, 64, 128 */
+static const int hwgain_table[] = {0, 1, 2, 3, 4, 5, 6, 7};
+
+static const struct regmap_config ada4250_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .read_flag_mask = BIT(7),
+ .max_register = 0x1A,
+};
+
+static int ada4250_set_offset_uv(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ int offset_uv)
+{
+ struct ada4250_state *st = iio_priv(indio_dev);
+
+ int i, ret, x[8], max_vos, min_vos, voltage_v, vlsb = 0;
+ u8 offset_raw, range = ADA4250_RANGE1;
+ u32 lsb_coeff[6] = {1333, 2301, 4283, 8289, 16311, 31599};
+
+ if (st->bias == 0 || st->bias == 3)
+ return -EINVAL;
+
+ voltage_v = regulator_get_voltage(st->reg);
+ voltage_v = DIV_ROUND_CLOSEST(voltage_v, 1000000);
+
+ if (st->bias == ADA4250_BIAS_AVDD)
+ x[0] = voltage_v;
+ else
+ x[0] = 5;
+
+ x[1] = 126 * (x[0] - 1);
+
+ for (i = 0; i < 6; i++)
+ x[i + 2] = DIV_ROUND_CLOSEST(x[1] * 1000, lsb_coeff[i]);
+
+ if (st->gain == 0)
+ return -EINVAL;
+
+ /* Compute Range and VLSB for the Sensor Offset Calibration */
+ for (i = ADA4250_RANGE1; i <= ADA4250_RANGE4; i++) {
+ max_vos = x[st->gain] * 127 * ((1 << (i + 1)) - 1);
+ min_vos = -1 * max_vos;
+ if (offset_uv > min_vos && offset_uv < max_vos) {
+ range = i;
+ vlsb = x[st->gain] * ((1 << (i + 1)) - 1);
+ break;
+ }
+ }
+
+ if (vlsb <= 0)
+ return -EINVAL;
+
+ offset_raw = DIV_ROUND_CLOSEST(abs(offset_uv), vlsb);
+
+ mutex_lock(&st->lock);
+ ret = regmap_update_bits(st->regmap, ADA4250_REG_SNSR_CAL_CNFG,
+ ADA4250_RANGE_SET_MSK,
+ FIELD_PREP(ADA4250_RANGE_SET_MSK, range));
+ if (ret)
+ goto exit;
+
+ st->offset_uv = offset_raw * vlsb;
+
+ if (offset_uv < 0) {
+ offset_raw |= 1 << 8;
+ st->offset_uv *= (-1);
+ }
+
+ ret = regmap_write(st->regmap, ADA4250_REG_SNSR_CAL_VAL, offset_raw);
+
+exit:
+ mutex_unlock(&st->lock);
+
+ return ret;
+}
+
+static int ada4250_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long info)
+{
+ struct ada4250_state *st = iio_priv(indio_dev);
+ int ret;
+
+ switch (info) {
+ case IIO_CHAN_INFO_HARDWAREGAIN:
+ ret = regmap_read(st->regmap, ADA4250_REG_GAIN_MUX, val);
+ if (ret)
+ return ret;
+
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_OFFSET:
+ *val = st->offset_uv;
+
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_CALIBBIAS:
+ ret = regmap_read(st->regmap, ADA4250_REG_SNSR_CAL_CNFG, val);
+ if (ret)
+ return ret;
+
+ *val = FIELD_GET(ADA4250_BIAS_SET_MSK, *val);
+
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ *val = 1;
+ *val2 = 1000000;
+
+ return IIO_VAL_FRACTIONAL;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ada4250_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long info)
+{
+ struct ada4250_state *st = iio_priv(indio_dev);
+ int ret;
+
+ switch (info) {
+ case IIO_CHAN_INFO_HARDWAREGAIN:
+ ret = regmap_write(st->regmap, ADA4250_REG_GAIN_MUX,
+ FIELD_PREP(ADA4250_GAIN_MUX_MSK, val));
+ if (ret)
+ return ret;
+
+ st->gain = val;
+
+ return ret;
+ case IIO_CHAN_INFO_OFFSET:
+ return ada4250_set_offset_uv(indio_dev, chan, val);
+ case IIO_CHAN_INFO_CALIBBIAS:
+ ret = regmap_update_bits(st->regmap, ADA4250_REG_SNSR_CAL_CNFG,
+ ADA4250_BIAS_SET_MSK,
+ FIELD_PREP(ADA4250_BIAS_SET_MSK, val));
+ if (ret)
+ return ret;
+
+ st->bias = val;
+
+ return ret;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ada4250_read_avail(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ const int **vals, int *type, int *length,
+ long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_CALIBBIAS:
+ *vals = calibbias_table;
+ *type = IIO_VAL_INT;
+ *length = ARRAY_SIZE(calibbias_table);
+
+ return IIO_AVAIL_LIST;
+ case IIO_CHAN_INFO_HARDWAREGAIN:
+ *vals = hwgain_table;
+ *type = IIO_VAL_INT;
+ *length = ARRAY_SIZE(hwgain_table);
+
+ return IIO_AVAIL_LIST;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ada4250_reg_access(struct iio_dev *indio_dev,
+ unsigned int reg,
+ unsigned int write_val,
+ unsigned int *read_val)
+{
+ struct ada4250_state *st = iio_priv(indio_dev);
+
+ if (read_val)
+ return regmap_read(st->regmap, reg, read_val);
+ else
+ return regmap_write(st->regmap, reg, write_val);
+}
+
+static const struct iio_info ada4250_info = {
+ .read_raw = ada4250_read_raw,
+ .write_raw = ada4250_write_raw,
+ .read_avail = &ada4250_read_avail,
+ .debugfs_reg_access = &ada4250_reg_access,
+};
+
+static const struct iio_chan_spec ada4250_channels[] = {
+ {
+ .type = IIO_ALTVOLTAGE,
+ .output = 1,
+ .indexed = 1,
+ .channel = 0,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_CALIBBIAS) |
+ BIT(IIO_CHAN_INFO_HARDWAREGAIN),
+ .info_mask_separate_available = BIT(IIO_CHAN_INFO_CALIBBIAS) |
+ BIT(IIO_CHAN_INFO_HARDWAREGAIN),
+ },
+ {
+ .type = IIO_VOLTAGE,
+ .output = 1,
+ .indexed = 1,
+ .channel = 0,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_OFFSET) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ },
+};
+
+static void ada4250_reg_disable(void *data)
+{
+ regulator_disable(data);
+}
+
+static int ada4250_init(struct ada4250_state *st)
+{
+ int ret;
+ u16 chip_id;
+ u8 data[2];
+ struct spi_device *spi = st->spi;
+
+ st->refbuf_en = device_property_read_bool(&spi->dev, "adi,refbuf-enable");
+
+ st->reg = devm_regulator_get(&spi->dev, "avdd");
+ if (IS_ERR(st->reg))
+ return dev_err_probe(&spi->dev, PTR_ERR(st->reg),
+ "failed to get the AVDD voltage\n");
+
+ ret = regulator_enable(st->reg);
+ if (ret) {
+ dev_err(&spi->dev, "Failed to enable specified AVDD supply\n");
+ return ret;
+ }
+
+ ret = devm_add_action_or_reset(&spi->dev, ada4250_reg_disable, st->reg);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(st->regmap, ADA4250_REG_RESET,
+ FIELD_PREP(ADA4250_RESET_MSK, 1));
+ if (ret)
+ return ret;
+
+ ret = regmap_bulk_read(st->regmap, ADA4250_REG_CHIP_ID, data, 2);
+ if (ret)
+ return ret;
+
+ chip_id = (data[1] << 8) | data[0];
+
+ if (chip_id != ADA4250_CHIP_ID) {
+ dev_err(&spi->dev, "Invalid chip ID.\n");
+ return -EINVAL;
+ }
+
+ return regmap_write(st->regmap, ADA4250_REG_REFBUF_EN,
+ FIELD_PREP(ADA4250_REFBUF_MSK, st->refbuf_en));
+}
+
+static int ada4250_probe(struct spi_device *spi)
+{
+ struct iio_dev *indio_dev;
+ struct regmap *regmap;
+ struct ada4250_state *st;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ regmap = devm_regmap_init_spi(spi, &ada4250_regmap_config);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ st = iio_priv(indio_dev);
+ st->regmap = regmap;
+ st->spi = spi;
+
+ indio_dev->info = &ada4250_info;
+ indio_dev->name = "ada4250";
+ indio_dev->channels = ada4250_channels;
+ indio_dev->num_channels = ARRAY_SIZE(ada4250_channels);
+
+ mutex_init(&st->lock);
+
+ ret = ada4250_init(st);
+ if (ret) {
+ dev_err(&spi->dev, "ADA4250 init failed\n");
+ return ret;
+ }
+
+ return devm_iio_device_register(&spi->dev, indio_dev);
+}
+
+static const struct spi_device_id ada4250_id[] = {
+ { "ada4250", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(spi, ada4250_id);
+
+static const struct of_device_id ada4250_of_match[] = {
+ { .compatible = "adi,ada4250" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ada4250_of_match);
+
+static struct spi_driver ada4250_driver = {
+ .driver = {
+ .name = "ada4250",
+ .of_match_table = ada4250_of_match,
+ },
+ .probe = ada4250_probe,
+ .id_table = ada4250_id,
+};
+module_spi_driver(ada4250_driver);
+
+MODULE_AUTHOR("Antoniu Miclaus <antoniu.miclaus@...log.com");
+MODULE_DESCRIPTION("Analog Devices ADA4250");
+MODULE_LICENSE("GPL v2");
--
2.35.1
Powered by blists - more mailing lists