lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Date:   Fri, 11 Feb 2022 20:08:21 +0900
From:   Kiwoong Kim <kwmad.kim@...sung.com>
To:     linux-scsi@...r.kernel.org, linux-kernel@...r.kernel.org,
        alim.akhtar@...sung.com, avri.altman@....com, jejb@...ux.ibm.com,
        martin.petersen@...cle.com, beanhuo@...ron.com,
        cang@...eaurora.org, adrian.hunter@...el.com, sc.suh@...sung.com,
        hy50.seo@...sung.com, sh425.lee@...sung.com,
        bhoon95.kim@...sung.com, vkumar.1997@...sung.com
Cc:     Kiwoong Kim <kwmad.kim@...sung.com>
Subject: [PATCH v1] scsi: ufs: exclude UECxx from SFR dump list

These are ROC type things that means their values
are cleared when the SFRs are read.
They are usually read in ISR when an UIC error occur.
Thus, their values would be zero at many cases. And
there might be a little bit risky when they are read to
be cleared before the ISR reads them, e.g. the case that
a command is timed-out, ufshcd_dump_regs is called in
ufshcd_abort and an UIC error occurs at the nearly
same time. In this case, ISR will be called but UFS error handler
will not be scheduled.
This patch is to make UFS driver not read those SFRs in the
dump function, i.e. ufshcd_dump_regs.

Signed-off-by: Kiwoong Kim <kwmad.kim@...sung.com>
---
 drivers/scsi/ufs/ufshcd.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 460d2b4..8b65c081 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -115,8 +115,12 @@ int ufshcd_dump_regs(struct ufs_hba *hba, size_t offset, size_t len,
 	if (!regs)
 		return -ENOMEM;
 
-	for (pos = 0; pos < len; pos += 4)
+	for (pos = 0; pos < len; pos += 4) {
+		if (pos >= REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER	&&
+		    pos <= REG_UIC_ERROR_CODE_DME)
+			continue;
 		regs[pos / 4] = ufshcd_readl(hba, offset + pos);
+	}
 
 	ufshcd_hex_dump(prefix, regs, len);
 	kfree(regs);
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ