[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220211160932.3221873-7-srinivas.pandruvada@linux.intel.com>
Date: Fri, 11 Feb 2022 08:09:32 -0800
From: Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>
To: rafael@...nel.org, lenb@...nel.org
Cc: linux-acpi@...r.kernel.org, linux-kernel@...r.kernel.org,
Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>
Subject: [PATCH v4 6/6] Documentation/admin-guide/acpi: Add documentation for fine grain control
Add documentation for the newly added attributes:
fine_grain_control
fan_speed_rpm
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>
---
.../acpi/fan_performance_states.rst | 28 +++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/Documentation/admin-guide/acpi/fan_performance_states.rst b/Documentation/admin-guide/acpi/fan_performance_states.rst
index 98fe5c333121..b9e4b4d146c1 100644
--- a/Documentation/admin-guide/acpi/fan_performance_states.rst
+++ b/Documentation/admin-guide/acpi/fan_performance_states.rst
@@ -60,3 +60,31 @@ For example::
When a given field is not populated or its value provided by the platform
firmware is invalid, the "not-defined" string is shown instead of the value.
+
+ACPI Fan Fine Grain Control
+=============================
+
+When _FIF object specifies support for fine grain control, then fan speed
+can be set from 0 to 100% with the recommended minimum "step size" via
+_FSL object. User can adjust fan speed using thermal sysfs cooling device.
+
+Here use can look at fan performance states for a reference speed (speed_rpm)
+and set it by changing cooling device cur_state. If the fine grain control
+is supported then user can also adjust to some other speeds which are
+not defined in the performance states.
+
+The support of fine grain control is presented via sysfs attribute
+"fine_grain_control". If fine grain control is present, this attribute
+will show "1" otherwise "0".
+
+This sysfs attribute is presented in the same directory as performance states.
+
+ACPI Fan Performance Feedback
+=============================
+
+The optional _FST object provides status information for the fan device.
+This includes field to provide current fan speed in revolutions per minute
+at which the fan is rotating.
+
+This speed is presented in the sysfs using the attribute "fan_speed_rpm",
+in the same directory as performance states.
--
2.34.1
Powered by blists - more mailing lists