[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220211161831.3493782-2-tjmercier@google.com>
Date: Fri, 11 Feb 2022 16:18:24 +0000
From: "T.J. Mercier" <tjmercier@...gle.com>
To: Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Jonathan Corbet <corbet@....net>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
"Arve Hjønnevåg" <arve@...roid.com>,
Todd Kjos <tkjos@...roid.com>,
Martijn Coenen <maco@...roid.com>,
Joel Fernandes <joel@...lfernandes.org>,
Christian Brauner <brauner@...nel.org>,
Hridya Valsaraju <hridya@...gle.com>,
Suren Baghdasaryan <surenb@...gle.com>,
Sumit Semwal <sumit.semwal@...aro.org>,
"Christian König" <christian.koenig@....com>,
Benjamin Gaignard <benjamin.gaignard@...aro.org>,
Liam Mark <lmark@...eaurora.org>,
Laura Abbott <labbott@...hat.com>,
Brian Starkey <Brian.Starkey@....com>,
John Stultz <john.stultz@...aro.org>,
Tejun Heo <tj@...nel.org>, Zefan Li <lizefan.x@...edance.com>,
Johannes Weiner <hannes@...xchg.org>
Cc: kaleshsingh@...gle.com, Kenny.Ho@....com,
"T.J. Mercier" <tjmercier@...gle.com>,
dri-devel@...ts.freedesktop.org, linux-doc@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-media@...r.kernel.org,
linaro-mm-sig@...ts.linaro.org, cgroups@...r.kernel.org
Subject: [RFC v2 1/6] gpu: rfc: Proposal for a GPU cgroup controller
This patch adds a proposal for a new GPU cgroup controller for
accounting/limiting GPU and GPU-related memory allocations.
The proposed controller is based on the DRM cgroup controller[1] and
follows the design of the RDMA cgroup controller.
The new cgroup controller would:
* Allow setting per-cgroup limits on the total size of buffers charged
to it.
* Allow setting per-device limits on the total size of buffers
allocated by device within a cgroup.
* Expose a per-device/allocator breakdown of the buffers charged to a
cgroup.
The prototype in the following patches is only for memory accounting
using the GPU cgroup controller and does not implement limit setting.
[1]: https://lore.kernel.org/amd-gfx/20210126214626.16260-1-brian.welty@intel.com/
From: Hridya Valsaraju <hridya@...gle.com>
Signed-off-by: Hridya Valsaraju <hridya@...gle.com>
Co-developed-by: T.J. Mercier <tjmercier@...gle.com>
Signed-off-by: T.J. Mercier <tjmercier@...gle.com>
---
Documentation/gpu/rfc/gpu-cgroup.rst | 195 +++++++++++++++++++++++++++
Documentation/gpu/rfc/index.rst | 4 +
2 files changed, 199 insertions(+)
create mode 100644 Documentation/gpu/rfc/gpu-cgroup.rst
diff --git a/Documentation/gpu/rfc/gpu-cgroup.rst b/Documentation/gpu/rfc/gpu-cgroup.rst
new file mode 100644
index 000000000000..0bb761223b97
--- /dev/null
+++ b/Documentation/gpu/rfc/gpu-cgroup.rst
@@ -0,0 +1,195 @@
+===================================
+GPU cgroup controller
+===================================
+
+Goals
+=====
+This document intends to outline a plan to create a cgroup v2 controller subsystem
+for the per-cgroup accounting of device and system memory allocated by the GPU
+and related subsystems.
+
+The new cgroup controller would:
+
+* Allow setting per-cgroup limits on the total size of buffers charged to it.
+
+* Allow setting per-device limits on the total size of buffers allocated by a
+ device/allocator within a cgroup.
+
+* Expose a per-device/allocator breakdown of the buffers charged to a cgroup.
+
+Alternatives Considered
+=======================
+
+The following alternatives were considered:
+
+The memory cgroup controller
+____________________________
+
+1. As was noted in [1], memory accounting provided by the GPU cgroup
+controller is not a good fit for integration into memcg due to the
+differences in how accounting is performed. It implements a mechanism
+for the allocator attribution of GPU and GPU-related memory by
+charging each buffer to the cgroup of the process on behalf of which
+the memory was allocated. The buffer stays charged to the cgroup until
+it is freed regardless of whether the process retains any references
+to it. On the other hand, the memory cgroup controller offers a more
+fine-grained charging and uncharging behavior depending on the kind of
+page being accounted.
+
+2. Memcg performs accounting in units of pages. In the DMA-BUF buffer sharing model,
+a process takes a reference to the entire buffer(hence keeping it alive) even if
+it is only accessing parts of it. Therefore, per-page memory tracking for DMA-BUF
+memory accounting would only introduce additional overhead without any benefits.
+
+[1]: https://patchwork.kernel.org/project/dri-devel/cover/20190501140438.9506-1-brian.welty@intel.com/#22624705
+
+Userspace service to keep track of buffer allocations and releases
+__________________________________________________________________
+
+1. There is no way for a userspace service to intercept all allocations and releases.
+2. In case the process gets killed or restarted, we lose all accounting so far.
+
+UAPI
+====
+When enabled, the new cgroup controller would create the following files in every cgroup.
+
+::
+
+ gpu.memory.current (R)
+ gpu.memory.max (R/W)
+
+gpu.memory.current is a read-only file and would contain per-device memory allocations
+in a key-value format where key is a string representing the device name
+and the value is the size of memory charged to the device in the cgroup in bytes.
+
+For example:
+
+::
+
+ cat /sys/kernel/fs/cgroup1/gpu.memory.current
+ dev1 4194304
+ dev2 4194304
+
+The string key for each device is set by the device driver when the device registers
+with the GPU cgroup controller to participate in resource accounting(see section
+'Design and Implementation' for more details).
+
+gpu.memory.max is a read/write file. It would show the current total
+size limits on memory usage for the cgroup and the limits on total memory usage
+for each allocator/device.
+
+Setting a total limit for a cgroup can be done as follows:
+
+::
+
+ echo “total 41943040” > /sys/kernel/fs/cgroup1/gpu.memory.max
+
+Setting a total limit for a particular device/allocator can be done as follows:
+
+::
+
+ echo “dev1 4194304” > /sys/kernel/fs/cgroup1/gpu.memory.max
+
+In this example, 'dev1' is the string key set by the device driver during
+registration.
+
+Design and Implementation
+=========================
+
+The cgroup controller would closely follow the design of the RDMA cgroup controller
+subsystem where each cgroup maintains a list of resource pools.
+Each resource pool contains a struct device and the counter to track current total,
+and the maximum limit set for the device.
+
+The below code block is a preliminary estimation on how the core kernel data structures
+and APIs would look like.
+
+.. code-block:: c
+
+ /**
+ * The GPU cgroup controller data structure.
+ */
+ struct gpucg {
+ struct cgroup_subsys_state css;
+
+ /* list of all resource pools that belong to this cgroup */
+ struct list_head rpools;
+ };
+
+ struct gpucg_device {
+ /*
+ * list of various resource pools in various cgroups that the device is
+ * part of.
+ */
+ struct list_head rpools;
+
+ /* list of all devices registered for GPU cgroup accounting */
+ struct list_head dev_node;
+
+ /* name to be used as identifier for accounting and limit setting */
+ const char *name;
+ };
+
+ struct gpucg_resource_pool {
+ /* The device whose resource usage is tracked by this resource pool */
+ struct gpucg_device *device;
+
+ /* list of all resource pools for the cgroup */
+ struct list_head cg_node;
+
+ /*
+ * list maintained by the gpucg_device to keep track of its
+ * resource pools
+ */
+ struct list_head dev_node;
+
+ /* tracks memory usage of the resource pool */
+ struct page_counter total;
+ };
+
+ /**
+ * gpucg_register_device - Registers a device for memory accounting using the
+ * GPU cgroup controller.
+ *
+ * @device: The device to register for memory accounting. Must remain valid
+ * after registration.
+ * @name: Pointer to a string literal to denote the name of the device.
+ */
+ void gpucg_register_device(struct gpucg_device *gpucg_dev, const char *name);
+
+ /**
+ * gpucg_try_charge - charge memory to the specified gpucg and gpucg_device.
+ *
+ * @gpucg: The gpu cgroup to charge the memory to.
+ * @device: The device to charge the memory to.
+ * @usage: size of memory to charge in bytes.
+ *
+ * Return: returns 0 if the charging is successful and otherwise returns an
+ * error code.
+ */
+ int gpucg_try_charge(struct gpucg *gpucg, struct gpucg_device *device, u64 usage);
+
+ /**
+ * gpucg_uncharge - uncharge memory from the specified gpucg and gpucg_device.
+ *
+ * @gpucg: The gpu cgroup to uncharge the memory from.
+ * @device: The device to charge the memory from.
+ * @usage: size of memory to uncharge in bytes.
+ */
+ void gpucg_uncharge(struct gpucg *gpucg, struct gpucg_device *device, u64 usage);
+
+Future Work
+===========
+Additional GPU resources can be supported by adding new controller files.
+
+Upstreaming Plan
+================
+* Decide on a UAPI that accommodates all use-cases for the upstream GPU ecosystem
+ as well as for Android.
+
+* Prototype the GPU cgroup controller and integrate its usage into the DMA-BUF
+ system heap.
+
+* Demonstrate its usage from userspace in the Android Open Space Project.
+
+* Send out RFCs to LKML for the GPU cgroup controller and iterate.
diff --git a/Documentation/gpu/rfc/index.rst b/Documentation/gpu/rfc/index.rst
index 91e93a705230..0a9bcd94e95d 100644
--- a/Documentation/gpu/rfc/index.rst
+++ b/Documentation/gpu/rfc/index.rst
@@ -23,3 +23,7 @@ host such documentation:
.. toctree::
i915_scheduler.rst
+
+.. toctree::
+
+ gpu-cgroup.rst
--
2.35.1.265.g69c8d7142f-goog
Powered by blists - more mailing lists