[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <YgaTqpmmb67mCdlc@robh.at.kernel.org>
Date: Fri, 11 Feb 2022 10:49:46 -0600
From: Rob Herring <robh@...nel.org>
To: Oleksij Rempel <o.rempel@...gutronix.de>
Cc: netdev <netdev@...r.kernel.org>, devicetree@...r.kernel.org,
Sascha Hauer <kernel@...gutronix.de>,
Jakub Kicinski <kuba@...nel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"David S. Miller" <davem@...emloft.net>
Subject: Re: [PATCH net-next v2 2/2] dt-bindings: net: add schema for
Microchip/SMSC LAN95xx USB Ethernet controllers
On Wed, Feb 09, 2022 at 05:02:52PM +0100, Oleksij Rempel wrote:
> On Wed, Feb 09, 2022 at 09:38:57AM -0600, Rob Herring wrote:
> > On Wed, Feb 9, 2022 at 9:35 AM Rob Herring <robh@...nel.org> wrote:
> > >
> > > On Wed, 09 Feb 2022 09:10:25 +0100, Oleksij Rempel wrote:
> > > > Create initial schema for Microchip/SMSC LAN95xx USB Ethernet controllers and
> > > > import all currently supported USB IDs form drivers/net/usb/smsc95xx.c
> > > >
> > > > Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
> > > > ---
> > > > .../bindings/net/microchip,lan95xx.yaml | 80 +++++++++++++++++++
> > > > 1 file changed, 80 insertions(+)
> > > > create mode 100644 Documentation/devicetree/bindings/net/microchip,lan95xx.yaml
> > > >
> > >
> > > Running 'make dtbs_check' with the schema in this patch gives the
> > > following warnings. Consider if they are expected or the schema is
> > > incorrect. These may not be new warnings.
> > >
> > > Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> > > This will change in the future.
> > >
> > > Full log is available here: https://patchwork.ozlabs.org/patch/1590223
> > >
> > >
> > > smsc@2: $nodename:0: 'smsc@2' does not match '^ethernet(@.*)?$'
> > > arch/arm/boot/dts/tegra30-ouya.dt.yaml
> > >
> > > usbether@1: $nodename:0: 'usbether@1' does not match '^ethernet(@.*)?$'
> > > arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dt.yaml
> > > arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dt.yaml
> > > arch/arm/boot/dts/bcm2835-rpi-b.dt.yaml
> > > arch/arm/boot/dts/bcm2835-rpi-b-plus.dt.yaml
> > > arch/arm/boot/dts/bcm2835-rpi-b-rev2.dt.yaml
> > > arch/arm/boot/dts/bcm2836-rpi-2-b.dt.yaml
> > > arch/arm/boot/dts/bcm2837-rpi-3-b.dt.yaml
> > > arch/arm/boot/dts/omap3-beagle-xm-ab.dt.yaml
> > > arch/arm/boot/dts/omap3-beagle-xm.dt.yaml
> > > arch/arm/boot/dts/omap4-panda-a4.dt.yaml
> > > arch/arm/boot/dts/omap4-panda.dt.yaml
> > > arch/arm/boot/dts/omap4-panda-es.dt.yaml
> > >
> > > usbether@3: $nodename:0: 'usbether@3' does not match '^ethernet(@.*)?$'
> > > arch/arm/boot/dts/omap5-uevm.dt.yaml
> >
> > So this binding is already in use, but was undocumented?
>
> Ack.
>
> > Or did you forget to remove the .txt file?
>
> No, there was no documentation.
>
> > The commit message should highlight all this.
> >
> > (I don't expect you to fix all these warnings, I was just surprised to
> > see them given this is an 'initial schema'.)
>
> This patches was create before I needed to use it. Should I resent it
> with new commit message?
Yes, please.
Rob
Powered by blists - more mailing lists