[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <9d3a2000d2bb014f1afb0613537bdc523202135d.1644681054.git.hns@goldelico.com>
Date: Sat, 12 Feb 2022 16:50:49 +0100
From: "H. Nikolaus Schaller" <hns@...delico.com>
To: Andrzej Hajda <andrzej.hajda@...el.com>,
Neil Armstrong <narmstrong@...libre.com>,
Robert Foss <robert.foss@...aro.org>,
Paul Boddie <paul@...die.org.uk>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Jernej Skrabec <jernej.skrabec@...il.com>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Paul Cercueil <paul@...pouillou.net>,
Maxime Ripard <maxime@...no.tech>,
Harry Wentland <harry.wentland@....com>,
"H. Nikolaus Schaller" <hns@...delico.com>,
Kieran Bingham <kieran.bingham+renesas@...asonboard.com>
Cc: Jonas Karlman <jonas@...boo.se>, linux-kernel@...r.kernel.org,
dri-devel@...ts.freedesktop.org, linux-mips@...r.kernel.org,
letux-kernel@...nphoenux.org,
Ezequiel Garcia <ezequiel@...labora.com>
Subject: [PATCH v15 1/7] drm/ingenic: Fix support for JZ4780 HDMI output
From: Paul Boddie <paul@...die.org.uk>
We have to make sure that
- JZ_LCD_OSDC_ALPHAEN is set
- plane f0 is disabled and not seen from user-space
Tested on MIPS Creator CI20 board.
Signed-off-by: Paul Boddie <paul@...die.org.uk>
Signed-off-by: Ezequiel Garcia <ezequiel@...labora.com>
Signed-off-by: H. Nikolaus Schaller <hns@...delico.com>
---
drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
index 7f10d6eed549d..dcf44cb00821f 100644
--- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
+++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
@@ -65,8 +65,10 @@ struct ingenic_dma_hwdescs {
struct jz_soc_info {
bool needs_dev_clk;
bool has_osd;
+ bool has_alpha;
bool map_noncoherent;
bool use_extended_hwdesc;
+ bool plane_f0_not_working;
unsigned int max_width, max_height;
const u32 *formats_f0, *formats_f1;
unsigned int num_formats_f0, num_formats_f1;
@@ -453,7 +455,7 @@ static int ingenic_drm_plane_atomic_check(struct drm_plane *plane,
if (!crtc)
return 0;
- if (plane == &priv->f0)
+ if (priv->soc_info->plane_f0_not_working && plane == &priv->f0)
return -EINVAL;
crtc_state = drm_atomic_get_existing_crtc_state(state,
@@ -1055,6 +1057,7 @@ static int ingenic_drm_bind(struct device *dev, bool has_components)
long parent_rate;
unsigned int i, clone_mask = 0;
int ret, irq;
+ u32 osdc = 0;
soc_info = of_device_get_match_data(dev);
if (!soc_info) {
@@ -1312,7 +1315,10 @@ static int ingenic_drm_bind(struct device *dev, bool has_components)
/* Enable OSD if available */
if (soc_info->has_osd)
- regmap_write(priv->map, JZ_REG_LCD_OSDC, JZ_LCD_OSDC_OSDEN);
+ osdc |= JZ_LCD_OSDC_OSDEN;
+ if (soc_info->has_alpha)
+ osdc |= JZ_LCD_OSDC_ALPHAEN;
+ regmap_write(priv->map, JZ_REG_LCD_OSDC, osdc);
mutex_init(&priv->clk_mutex);
priv->clock_nb.notifier_call = ingenic_drm_update_pixclk;
@@ -1511,7 +1517,9 @@ static const struct jz_soc_info jz4770_soc_info = {
static const struct jz_soc_info jz4780_soc_info = {
.needs_dev_clk = true,
.has_osd = true,
+ .has_alpha = true,
.use_extended_hwdesc = true,
+ .plane_f0_not_working = true, /* REVISIT */
.max_width = 4096,
.max_height = 2048,
.formats_f1 = jz4770_formats_f1,
--
2.33.0
Powered by blists - more mailing lists