Message-Id: <f0c29baa66cbabf2d8a4384d0b0f1ccea7fd9bf3.1644830251.git.bristot@kernel.org>
Date:   Mon, 14 Feb 2022 11:45:05 +0100
From:   Daniel Bristot de Oliveira <bristot@...nel.org>
To:     Steven Rostedt <rostedt@...dmis.org>
Cc:     Daniel Bristot de Oliveira <bristot@...nel.org>,
        Jonathan Corbet <corbet@....net>,
        Ingo Molnar <mingo@...hat.com>,
        Thomas Gleixner <tglx@...utronix.de>,
        Peter Zijlstra <peterz@...radead.org>,
        Will Deacon <will@...nel.org>,
        Catalin Marinas <catalin.marinas@....com>,
        Marco Elver <elver@...gle.com>,
        Dmitry Vyukov <dvyukov@...gle.com>,
        "Paul E. McKenney" <paulmck@...nel.org>,
        Shuah Khan <skhan@...uxfoundation.org>,
        Gabriele Paoloni <gpaoloni@...hat.com>,
        Juri Lelli <juri.lelli@...hat.com>,
        Clark Williams <williams@...hat.com>,
        linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-trace-devel@...r.kernel.org
Subject: [RFC V2 14/21] Documentation/rv: Add a basic documentation

Add the runtime-verification.rst document, explaining the basics of RV
and how to use the interface.

Cc: Jonathan Corbet <corbet@....net>
Cc: Steven Rostedt <rostedt@...dmis.org>
Cc: Ingo Molnar <mingo@...hat.com>
Cc: Thomas Gleixner <tglx@...utronix.de>
Cc: Peter Zijlstra <peterz@...radead.org>
Cc: Will Deacon <will@...nel.org>
Cc: Catalin Marinas <catalin.marinas@....com>
Cc: Marco Elver <elver@...gle.com>
Cc: Dmitry Vyukov <dvyukov@...gle.com>
Cc: "Paul E. McKenney" <paulmck@...nel.org>
Cc: Shuah Khan <skhan@...uxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@...hat.com>
Cc: Juri Lelli <juri.lelli@...hat.com>
Cc: Clark Williams <williams@...hat.com>
Cc: linux-doc@...r.kernel.org
Cc: linux-kernel@...r.kernel.org
Cc: linux-trace-devel@...r.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@...nel.org>
---
 Documentation/trace/index.rst                 |   1 +
 Documentation/trace/rv/index.rst              |   9 +
 .../trace/rv/runtime-verification.rst         | 233 ++++++++++++++++++
 kernel/trace/rv/Kconfig                       |   3 +
 4 files changed, 246 insertions(+)
 create mode 100644 Documentation/trace/rv/index.rst
 create mode 100644 Documentation/trace/rv/runtime-verification.rst

diff --git a/Documentation/trace/index.rst b/Documentation/trace/index.rst
index 3769b9b7aed8..879a95cad9b3 100644
--- a/Documentation/trace/index.rst
+++ b/Documentation/trace/index.rst
@@ -30,3 +30,4 @@ Linux Tracing Technologies
    stm
    sys-t
    coresight/index
+   rv/index
diff --git a/Documentation/trace/rv/index.rst b/Documentation/trace/rv/index.rst
new file mode 100644
index 000000000000..92338dceffab
--- /dev/null
+++ b/Documentation/trace/rv/index.rst
@@ -0,0 +1,9 @@
+===================================
+RV - Runtime Verification Interface
+===================================
+
+.. toctree::
+   :maxdepth: 2
+   :glob:
+
+   *
diff --git a/Documentation/trace/rv/runtime-verification.rst b/Documentation/trace/rv/runtime-verification.rst
new file mode 100644
index 000000000000..5ee22c866183
--- /dev/null
+++ b/Documentation/trace/rv/runtime-verification.rst
@@ -0,0 +1,233 @@
+====================
+Runtime Verification
+====================
+
+Runtime Verification (RV) is a lightweight (yet rigorous) method that
+complements classical exhaustive verification techniques (such as *model
+checking* and *theorem proving*) with a more practical approach for complex
+systems.
+
+
+Instead of relying on a fine-grained model of a system (e.g., a
+re-implementation a instruction level), RV works by analyzing the trace of the
+system's actual execution, comparing it against a formal specification of
+the system behavior.
+
+The main advantage is that RV can give precise information on the runtime
+behavior of the monitored system, without the pitfalls of developing models
+that require a re-implementation of the entire system in a modeling language.
+Moreover, given an efficient monitoring method, it is possible execute an
+*online* verification of a system, enabling the *reaction* for unexpected
+events, avoiding, for example, the propagation of a failure on safety-critical
+systems.
+
+Runtime Monitors and Reactors
+=============================
+
+A monitor is the central part of the runtime verification of a system. The
+monitor stands in between the formal specification of the desired (or
+undesired) behavior, and the trace of the actual system system.
+
+In Linux terms, the runtime verification monitors are encapsulated inside the
+*RV monitor* abstraction. A *RV monitor* includes a reference model of the
+system, a set of instances of the monitor (per-cpu monitor, per-task monitor,
+and so on), and the helper functions that glue the monitor to the system via
+trace, as depicted bellow::
+
+ Linux   +---- RV Monitor ----------------------------------+ Formal
+  Realm  |                                                  |  Realm
+  +-------------------+     +----------------+     +-----------------+
+  |   Linux kernel    |     |     Monitor    |     |     Reference   |
+  |     Tracing       |  -> |   Instance(s)  | <-  |       Model     |
+  | (instrumentation) |     | (verification) |     | (specification) |
+  +-------------------+     +----------------+     +-----------------+
+         |                          |                       |
+         |                          V                       |
+         |                     +----------+                 |
+         |                     | Reaction |                 |
+         |                     +--+--+--+-+                 |
+         |                        |  |  |                   |
+         |                        |  |  +-> trace output ?  |
+         +------------------------|--|----------------------+
+                                  |  +----> panic ?
+                                  +-------> <user-specified>
+
+In addition to the verification and monitoring of the system, a monitor can
+react to an unexpected event. The forms of reaction can vary from logging the
+event occurrence to the enforcement of the correct behavior to the extreme
+action of taking a system down to avoid the propagation of a failure.
+
+In Linux terms, a *reactor* is an reaction method available for *RV monitors*.
+By default, all monitors should provide a trace output of their actions,
+which is already a reaction. In addition, other reactions will be available
+so the user can enable them as needed.
+
+For further information about the principles of runtime verification and
+RV applied to Linux:
+
+  BARTOCCI, Ezio, et al. *Introduction to runtime verification.* In: Lectures on
+  Runtime Verification. Springer, Cham, 2018. p. 1-33.
+
+  FALCONE, Ylies, et al. *A taxonomy for classifying runtime verification tools.*
+  In: International Conference on Runtime Verification. Springer, Cham, 2018. p.
+  241-262.
+
+  DE OLIVEIRA, Daniel Bristot, et al. *Automata-based formal analysis and
+  verification of the real-time Linux kernel.* Ph.D. Thesis, 2020.
+
+Online RV monitors
+==================
+
+Monitors can be classified as *offline* and *online* monitors. *Offline*
+monitor process the traces generated by a system after the events, generally by
+reading the trace execution from a permanent storage system. *Online* monitors
+process the trace during the execution of the system. Online monitors are said
+to be *synchronous* if the processing of an event is attached to the system
+execution, blocking the system during the event monitoring. On the other hand,
+an *asynchronous* monitor has its execution detached from the system. Each type
+of monitor has a set of advantages. For example, *offline* monitors can be
+executed on different machines but require operations to save the log to a
+file. In contrast, *synchronous online* method can react at the exact moment
+a violation occurs.
+
+Another important aspect regarding monitors is the overhead associated with the
+event analysis. If the system generates events at a frequency higher than the
+monitor's ability to process them in the same system, only the *offline*
+methods are viable. On the other hand, if the tracing of the events incurs
+on higher overhead than the simple handling of an event by a monitor, then a
+*synchronous online* monitors will incur on lower overhead.
+
+Indeed, the research presented in:
+
+  DE OLIVEIRA, Daniel Bristot; CUCINOTTA, Tommaso; DE OLIVEIRA, Romulo Silva.
+  *Efficient formal verification for the Linux kernel.* In: International
+  Conference on Software Engineering and Formal Methods. Springer, Cham, 2019.
+  p. 315-332.
+
+Shows that for Deterministic Automata models, the synchronous processing of
+events in-kernel causes lower overhead than saving the same events to the trace
+buffer, not even considering collecting the trace for user-space analysis.
+This motivated the development of an in-kernel interface for online monitors.
+
+For further information about modeling of Linux kernel behavior using automata,
+please read:
+
+  DE OLIVEIRA, Daniel B.; DE OLIVEIRA, Romulo S.; CUCINOTTA, Tommaso. *A thread
+  synchronization model for the PREEMPT_RT Linux kernel.* Journal of Systems
+  Architecture, 2020, 107: 101729.
+
+The user interface
+==================
+
+The user interface resembles the tracing interface (on purpose). It is
+currently at "/sys/kernel/tracing/rv/".
+
+The following files/folders are currently available:
+
+**available_monitors**
+
+- Reading list the available monitors, one per line
+
+For example::
+
+   [root@f32 rv]# cat available_monitors
+   wip
+   wwnr
+
+**available_reactors**
+
+- Reading shows the available reactors, one per line.
+
+For example::
+
+   [root@f32 rv]# cat available_reactors
+   nop
+   panic
+   printk
+
+**enabled_monitors**:
+
+- Reading lists the enabled monitors, one per line
+- Writing to it enables a given monitor
+- Writing a monitor name with a '-' prefix disables it
+- Truncating the file disables all enabled monitors
+
+For example::
+
+   [root@f32 rv]# cat enabled_monitors
+   [root@f32 rv]# echo wip > enabled_monitors
+   [root@f32 rv]# echo wwnr >> enabled_monitors
+   [root@f32 rv]# cat enabled_monitors
+   wip
+   wwnr
+   [root@f32 rv]# echo -wip >> enabled_monitors
+   [root@f32 rv]# cat enabled_monitors
+   wwnr
+   [root@f32 rv]# echo > enabled_monitors
+   [root@f32 rv]# cat enabled_monitors
+   [root@f32 rv]#
+
+Note that it is possible to enable more than one monitor concurrently.
+
+
+**monitoring_on**
+
+This is an on/off general switcher for monitoring. It resembles the
+"tracing_on" switcher in the trace interface.
+
+- Writing "0" stops the monitoring
+- Writing "1" continues the monitoring
+- Reading returns the current status of the monitoring
+
+Note that it does not disable enabled monitors but stop the per-entity
+monitors monitoring the events received from the system.
+
+**reacting_on**
+
+- Writing "0" prevents reactions for happening
+- Writing "1" enable reactions
+- Reading returns the current status of the monitoring
+
+**monitors/**
+
+Each monitor will have its own directory inside "monitors/". There the
+monitor-specific files will be presented. The "monitors/" directory resembles
+the "events" directory on tracefs.
+
+For example::
+
+   [root@f32 rv]# cd monitors/wip/
+   [root@f32 wip]# ls
+   desc  enable
+   [root@f32 wip]# cat desc
+   auto-generated wakeup in preemptive monitor.
+   [root@f32 wip]# cat enable
+   0
+
+**monitors/$MONITOR/desc**
+
+- Reading shows a description of the monitor *$MONITOR*
+
+**monitors/$MONITOR/enable**
+
+- Writing "0" disables the *$MONITOR*
+- Writing "1" enables the *$MONITOR*
+- Reading return the current status of the *$MONITOR*
+
+**monitors/$MONITOR/reactors**
+
+- List available reactors, with the select reaction for the given *MONITOR*
+  inside "[]". The default one is the nop (no operation) reactor.
+- Writing the name of a reactor enables it to the given MONITOR.
+
+For example::
+
+   [root@f32 rv]# cat monitors/wip/reactors
+   [nop]
+   panic
+   printk
+   [root@f32 rv]# echo panic > monitors/wip/reactors
+   [root@f32 rv]# cat monitors/wip/reactors
+   nop
+   [panic]
+   printk
diff --git a/kernel/trace/rv/Kconfig b/kernel/trace/rv/Kconfig
index 7940898a0504..a6545a84df13 100644
--- a/kernel/trace/rv/Kconfig
+++ b/kernel/trace/rv/Kconfig
@@ -11,6 +11,9 @@ menuconfig RV
 	  actual execution, comparing it against a formal specification of
 	  the system behavior.
 
+	  For further information, see:
+	    Documentation/trace/rv/runtime-verification.rst
+
 if RV
 
 config RV_MON_WIP
-- 
2.33.1

Powered by blists - more mailing lists