linux-kernel - Re: [PATCH] xhci: reduce xhci_handshake timeout in xhci

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220214121710.GA31021@hu-pkondeti-hyd.qualcomm.com>
Date:   Mon, 14 Feb 2022 17:47:10 +0530
From:   Pavan Kondeti <quic_pkondeti@...cinc.com>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>
CC:     Pavankumar Kondeti <quic_pkondeti@...cinc.com>,
        Mathias Nyman <mathias.nyman@...el.com>,
        <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <quic_ugoswami@...cinc.com>, Jung Daehwan <dh10.jung@...sung.com>
Subject: Re: [PATCH] xhci: reduce xhci_handshake timeout in xhci_reset

Hi Greg,

On Mon, Feb 14, 2022 at 12:36:47PM +0100, Greg Kroah-Hartman wrote:
> On Mon, Feb 14, 2022 at 04:34:23PM +0530, Pavankumar Kondeti wrote:
> > From: Daehwan Jung <dh10.jung@...sung.com>
> > 
> > xhci_reset() is called with interrupts disabled. Waiting 10 seconds for
> > controller reset and controller ready operations can be fatal to the
> > system when controller is timed out. Reduce the timeout to 1 second
> > and print a error message when the time out happens.
> > 
> > Fixes: 22ceac191211 ("xhci: Increase reset timeout for Renesas 720201 host.")
> > Signed-off-by: Daehwan Jung <dh10.jung@...sung.com>
> > Signed-off-by: Pavankumar Kondeti <quic_pkondeti@...cinc.com>
> > ---
> >  drivers/usb/host/xhci.c | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> > index dc357ca..ec4df72 100644
> > --- a/drivers/usb/host/xhci.c
> > +++ b/drivers/usb/host/xhci.c
> > @@ -196,7 +196,7 @@ int xhci_reset(struct xhci_hcd *xhci)
> >  		udelay(1000);
> >  
> >  	ret = xhci_handshake(&xhci->op_regs->command,
> > -			CMD_RESET, 0, 10 * 1000 * 1000);
> > +			CMD_RESET, 0, 1 * 1000 * 1000);
> >  	if (ret)
> >  		return ret;
> >  
> > @@ -210,7 +210,7 @@ int xhci_reset(struct xhci_hcd *xhci)
> >  	 * than status until the "Controller Not Ready" flag is cleared.
> >  	 */
> >  	ret = xhci_handshake(&xhci->op_regs->status,
> > -			STS_CNR, 0, 10 * 1000 * 1000);
> > +			STS_CNR, 0, 1 * 1000 * 1000);
> >  
> >  	xhci->usb2_rhub.bus_state.port_c_suspend = 0;
> >  	xhci->usb2_rhub.bus_state.suspended_ports = 0;
> > -- 
> > 2.7.4
> > 
> 
> I do not see any "print an error message" change here.  Where is that
> addition?
> 

Thanks for taking a look. The "error messages prints" are in my working tree
unstaged :-( sorry for the confusion. I will fix it and resend the patch.

Thanks,
Pavan