linux-kernel - Re: [PATCH v2 00/10] update Facebook Bletchley BMC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <Ygqe6lwWUdgv+8ss@patrickw3-mbp>
Date:   Mon, 14 Feb 2022 12:27:59 -0600
From:   Patrick Williams <patrick@...cx.xyz>
To:     Potin Lai <potin.lai@...ntatw.com>
Cc:     Rob Herring <robh+dt@...nel.org>, Joel Stanley <joel@....id.au>,
        Andrew Jeffery <andrew@...id.au>, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-aspeed@...ts.ozlabs.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 00/10] update Facebook Bletchley BMC

On Mon, Feb 14, 2022 at 12:25:28PM +0800, Potin Lai wrote:
> This patch series update Facebook Bletchley BMC devicetree base on EVT HW
> schematioc design, and rebase SLED numbering to 1-based for OpenBMC
> multi-host.
> 
> - GPIO:
>   - adding more gpio line names
>   - include interrupt line in io expander for gpio interrupt monitoring
> 
> - SPI flash:
>   - adding dual flash BSM module support
>   - switch to spi2-gpio on spi2 due to unstable signal issue
> 
> - Hwmon Sensors:
>   - adding INA230 sensors for monitoring
>   - fix ADM1278 shunt-resistor
> 
> - MDIO Bus: enable mido3 bus
> 
> - RTC: switch to external battery-backed rtc
> 
> - OpenBMC: 1-based SLED numbering
> 
> 
> LINK: [v1] https://lore.kernel.org/all/20220211014347.24841-1-potin.lai@quantatw.com/
> 
> 
> Changes v1 --> v2:
> - update the details of new added gpio line names in commit message
> - add battery-backed rtc information in comment and commit message

Thank you for the details there Potin.

> 
> Potin Lai (10):
>   arch: arm: dts: bletchley: switch sled numbering to 1-based
>   arch: arm: dts: bletchley: separate leds into multiple groups
>   arch: arm: dts: bletchley: update gpio-line-names
>   arch: arm: dts: bletchley: update fmc configurations
>   arch: arm: dts: bletchley: switch to spi-gpio for spi2
>   arch: arm: dts: bletchley: add interrupt support for sled io expander
>   arch: arm: dts: bletchley: add shunt-resistor for ADM1278
>   arch: arm: dts: bletchley: add INA230 sensor on each sled
>   arch: arm: dts: bletchley: enable mdio3 bus
>   arch: arm: dts: bletchley: cleanup redundant nodes
> 
>  .../dts/aspeed-bmc-facebook-bletchley.dts     | 303 +++++++++++-------
>  1 file changed, 194 insertions(+), 109 deletions(-)
> 
> -- 
> 2.17.1
> 

Entire series is

Reviewed-by: Patrick Williams <patrick@...cx.xyz>

-- 
Patrick Williams