| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1e016441cdbae4fc6300dd6b70e9e29def81a960.camel@mediatek.com>
Date: Mon, 14 Feb 2022 15:44:30 +0800
From: Chunfeng Yun <chunfeng.yun@...iatek.com>
To: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>
CC: <mathias.nyman@...el.com>, <gregkh@...uxfoundation.org>,
<matthias.bgg@...il.com>, <linux-usb@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] usb: host: xhci-mtk: Simplify supplies handling with
regulator_bulk
On Mon, 2022-02-07 at 11:00 +0100, AngeloGioacchino Del Regno wrote:
> Il 20/01/22 07:50, Chunfeng Yun ha scritto:
> > On Tue, 2022-01-18 at 14:33 +0100, AngeloGioacchino Del Regno
> > wrote:
> > > Remove the custom functions xhci_mtk_ldos_{enable,disable}() by
> > > switching to using regulator_bulk to perform the very same thing,
> > > as the regulators are always either both enabled or both
> > > disabled.
> > >
> > > Signed-off-by: AngeloGioacchino Del Regno <
> > > angelogioacchino.delregno@...labora.com>
> > > ---
> > > drivers/usb/host/xhci-mtk.c | 56 ++++++++++++----------------
> > > -------
> > > --
> > > drivers/usb/host/xhci-mtk.h | 4 +--
> > > 2 files changed, 20 insertions(+), 40 deletions(-)
> > >
> > > diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-
> > > mtk.c
> > > index 62c835d446be..3b81931e5b77 100644
> > > --- a/drivers/usb/host/xhci-mtk.c
> > > +++ b/drivers/usb/host/xhci-mtk.c
> > > @@ -395,31 +395,6 @@ static int xhci_mtk_clks_get(struct
> > > xhci_hcd_mtk
> > > *mtk)
> > > return devm_clk_bulk_get_optional(mtk->dev,
> > > BULK_CLKS_NUM,
> > > clks);
> > > }
> > >
> > > -static int xhci_mtk_ldos_enable(struct xhci_hcd_mtk *mtk)
> > > -{
> > > - int ret;
> > > -
> > > - ret = regulator_enable(mtk->vbus);
> > > - if (ret) {
> > > - dev_err(mtk->dev, "failed to enable vbus\n");
> > > - return ret;
> > > - }
> > > -
> > > - ret = regulator_enable(mtk->vusb33);
> > > - if (ret) {
> > > - dev_err(mtk->dev, "failed to enable vusb33\n");
> > > - regulator_disable(mtk->vbus);
> > > - return ret;
> > > - }
> > > - return 0;
> > > -}
> > > -
> > > -static void xhci_mtk_ldos_disable(struct xhci_hcd_mtk *mtk)
> > > -{
> > > - regulator_disable(mtk->vbus);
> > > - regulator_disable(mtk->vusb33);
> > > -}
> > > -
> > > static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd
> > > *xhci)
> > > {
> > > struct usb_hcd *hcd = xhci_to_hcd(xhci);
> > > @@ -475,6 +450,10 @@ static int xhci_mtk_setup(struct usb_hcd
> > > *hcd)
> > > return ret;
> > > }
> > >
> > > +static const char * const xhci_mtk_supply_names[] = {
> > > + "vusb33", "vbus",
> > > +};
> > > +
> > > static const struct xhci_driver_overrides xhci_mtk_overrides
> > > __initconst = {
> > > .reset = xhci_mtk_setup,
> > > .add_endpoint = xhci_mtk_add_ep,
> > > @@ -507,17 +486,18 @@ static int xhci_mtk_probe(struct
> > > platform_device *pdev)
> > > return -ENOMEM;
> > >
> > > mtk->dev = dev;
> > > - mtk->vbus = devm_regulator_get(dev, "vbus");
> > > - if (IS_ERR(mtk->vbus)) {
> > > - dev_err(dev, "fail to get vbus\n");
> > > - return PTR_ERR(mtk->vbus);
> > > - }
> > > + mtk->num_supplies = ARRAY_SIZE(xhci_mtk_supply_names);
> > > + mtk->supplies = devm_kcalloc(dev, mtk->num_supplies,
> > > + sizeof(*mtk->supplies),
> > > GFP_KERNEL);
> > > + if (!mtk->supplies)
> > > + return -ENOMEM;
> > >
> > > - mtk->vusb33 = devm_regulator_get(dev, "vusb33");
> > > - if (IS_ERR(mtk->vusb33)) {
> > > - dev_err(dev, "fail to get vusb33\n");
> > > - return PTR_ERR(mtk->vusb33);
> > > - }
> > > + regulator_bulk_set_supply_names(mtk->supplies,
> > > xhci_mtk_supply_names,
> > > + mtk->num_supplies);
> > > +
> > > + ret = devm_regulator_bulk_get(dev, mtk->num_supplies, mtk-
> > > > supplies);
> > >
> > > + if (ret)
> > > + return dev_err_probe(dev, ret, "Failed to get
> > > regulators\n");
> > >
> > > ret = xhci_mtk_clks_get(mtk);
> > > if (ret)
> > > @@ -558,7 +538,7 @@ static int xhci_mtk_probe(struct
> > > platform_device
> > > *pdev)
> > > pm_runtime_enable(dev);
> > > pm_runtime_get_sync(dev);
> > >
> > > - ret = xhci_mtk_ldos_enable(mtk);
> > > + ret = regulator_bulk_enable(mtk->num_supplies, mtk->supplies);
> > > if (ret)
> > > goto disable_pm;
> > >
> > > @@ -667,7 +647,7 @@ static int xhci_mtk_probe(struct
> > > platform_device
> > > *pdev)
> > > clk_bulk_disable_unprepare(BULK_CLKS_NUM, mtk->clks);
> > >
> > > disable_ldos:
> > > - xhci_mtk_ldos_disable(mtk);
> > > + regulator_bulk_disable(mtk->num_supplies, mtk->supplies);
> > >
> > > disable_pm:
> > > pm_runtime_put_noidle(dev);
> > > @@ -695,7 +675,7 @@ static int xhci_mtk_remove(struct
> > > platform_device
> > > *pdev)
> > > usb_put_hcd(hcd);
> > > xhci_mtk_sch_exit(mtk);
> > > clk_bulk_disable_unprepare(BULK_CLKS_NUM, mtk->clks);
> > > - xhci_mtk_ldos_disable(mtk);
> > > + regulator_bulk_disable(mtk->num_supplies, mtk->supplies);
> > >
> > > pm_runtime_disable(dev);
> > > pm_runtime_put_noidle(dev);
> > > diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-
> > > mtk.h
> > > index 4b1ea89f959a..9b78cd2ba0ac 100644
> > > --- a/drivers/usb/host/xhci-mtk.h
> > > +++ b/drivers/usb/host/xhci-mtk.h
> > > @@ -150,9 +150,9 @@ struct xhci_hcd_mtk {
> > > int num_u3_ports;
> > > int u2p_dis_msk;
> > > int u3p_dis_msk;
> > > - struct regulator *vusb33;
> > > - struct regulator *vbus;
> > > struct clk_bulk_data clks[BULK_CLKS_NUM];
> > > + struct regulator_bulk_data *supplies;
> > > + u8 num_supplies;
> >
> > Could you please help to change it like as clock bulk?
> >
> > 1. #define BULK_REGULATORS_NUM 2; then define @supplies array,
> >
> > struct regulator_bulk_data supplies[BULK_REGULATORS_NUM];
> >
> > 2. also add a helper to get regulator bulk; e.g.
> >
> > static int xhci_mtk_regulators_get(struct xhci_hcd_mtk *mtk)
> > {
> > struct regulator_bulk_data *supplies = mtk->supplies;
> >
> > supplies[0].supply = "vusb33";
> > supplies[1].supply = "vbus";
> >
> > return devm_regulator_bulk_get(mtk->dev, BUL
> > K_REGULATORS_NUM, supplies);
> > }
>
> Hello Chunfeng,
> I chose to go for this way to enhance the implementation flexibility:
> like that,
> any future SoC that needs different regulators (more vregs, less,
> different names)
> will simply need a new array of vreg names, like:
>
> static const char * const xhci_mtk_mtxxxx_supply_names[] = {
> "vusb33", "vbus", "another-supply", "and-another-one",
> };
>
> Other than enhancing flexibility, this will also make sure that we
> don't allocate
> more regulator_bulk_data entries than needed, enhancing memory usage.
>
> Your proposal, though, is valid if you are sure that future SoCs will
> have only
> and always these two power supplies and nothing else...
As I know, vbus is usually always on (fixed regulator) and is used to
provide 5v for the connected device, vusb33 is rarely used now (it's
used to provide v3.3 for the controller). I think no need pay more
attention to flexibility here.
Thanks a lot
>
> Regards,
> Angelo
>
> >
> > Thanks a lot
> >
> >
> > > unsigned int has_ippc:1;
> > > unsigned int lpm_support:1;
> > > unsigned int u2_lpm_disable:1;
Powered by blists - more mailing lists