| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220214084839.GG3494@thinkpad>
Date: Mon, 14 Feb 2022 14:18:39 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: Rohit Agarwal <quic_rohiagar@...cinc.com>
Cc: agross@...nel.org, bjorn.andersson@...aro.org,
mturquette@...libre.com, sboyd@...nel.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-clk@...r.kernel.org
Subject: Re: [PATCH 7/8] clk: qcom: Add SDX65 APCS clock controller support
On Mon, Feb 14, 2022 at 12:34:07PM +0530, Rohit Agarwal wrote:
> Add a driver for the SDX65 APCS clock controller. It is part of the APCS
> hardware block, which among other things implements also a combined mux
> and half integer divider functionality. The APCS clock controller has 3
> parent clocks:
>
> 1. Board XO
> 2. Fixed rate GPLL0
> 3. A7 PLL
>
> This is required for enabling CPU frequency scaling on SDX65-based
> platforms.
>
> Signed-off-by: Rohit Agarwal <quic_rohiagar@...cinc.com>
I assume that the SDX65 is alomst a replica of SDX55. So why can't we use
"qcom-sdx55-acps-clk"?
Thanks,
Mani
> ---
> drivers/clk/qcom/Kconfig | 9 +++
> drivers/clk/qcom/Makefile | 1 +
> drivers/clk/qcom/apcs-sdx65.c | 130 ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 140 insertions(+)
> create mode 100644 drivers/clk/qcom/apcs-sdx65.c
>
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index 1904ba1..49e89f8 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -63,6 +63,15 @@ config QCOM_CLK_APCS_SDX55
> Say Y if you want to support CPU frequency scaling on devices
> such as SDX55.
>
> +config QCOM_CLK_APCS_SDX65
> + tristate "SDX65 APCS Clock Controller"
> + depends on QCOM_APCS_IPC || COMPILE_TEST
> + help
> + Support for the APCS Clock Controller on SDX65 platform. The
> + APCS is managing the mux and divider which feeds the CPUs.
> + Say Y if you want to support CPU frequency scaling on devices
> + such as SDX65.
> +
> config QCOM_CLK_RPM
> tristate "RPM based Clock Controller"
> depends on MFD_QCOM_RPM
> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
> index 3d855c1..f914f31 100644
> --- a/drivers/clk/qcom/Makefile
> +++ b/drivers/clk/qcom/Makefile
> @@ -51,6 +51,7 @@ obj-$(CONFIG_QCOM_A7PLL) += a7-pll.o
> obj-$(CONFIG_QCOM_CLK_APCS_MSM8916) += apcs-msm8916.o
> obj-$(CONFIG_QCOM_CLK_APCC_MSM8996) += clk-cpu-8996.o
> obj-$(CONFIG_QCOM_CLK_APCS_SDX55) += apcs-sdx55.o
> +obj-$(CONFIG_QCOM_CLK_APCS_SDX65) += apcs-sdx65.o
> obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
> obj-$(CONFIG_QCOM_CLK_RPMH) += clk-rpmh.o
> obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
> diff --git a/drivers/clk/qcom/apcs-sdx65.c b/drivers/clk/qcom/apcs-sdx65.c
> new file mode 100644
> index 0000000..c0cc16a
> --- /dev/null
> +++ b/drivers/clk/qcom/apcs-sdx65.c
> @@ -0,0 +1,130 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/cpu.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_domain.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +
> +#include "clk-regmap.h"
> +#include "clk-regmap-mux-div.h"
> +
> +static const u32 apcs_mux_clk_parent_map[] = { 0, 1, 5 };
> +
> +static const struct clk_parent_data pdata[] = {
> + { .fw_name = "ref" },
> + { .fw_name = "aux" },
> + { .fw_name = "pll" },
> +};
> +
> +static int a7cc_notifier_cb(struct notifier_block *nb, unsigned long event,
> + void *data)
> +{
> + int ret = 0;
> + struct clk_regmap_mux_div *md = container_of(nb,
> + struct clk_regmap_mux_div,
> + clk_nb);
> + if (event == PRE_RATE_CHANGE)
> + ret = mux_div_set_src_div(md, 1, 2);
> +
> + return notifier_from_errno(ret);
> +}
> +
> +static int qcom_apcs_sdx65_clk_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device *parent = dev->parent;
> + struct device *cpu_dev;
> + struct clk_regmap_mux_div *a7cc;
> + struct regmap *regmap;
> + struct clk_init_data init = { };
> + int ret;
> +
> + regmap = dev_get_regmap(parent, NULL);
> + if (!regmap) {
> + dev_err(dev, "Failed to get parent regmap\n");
> + return -ENODEV;
> + }
> +
> + a7cc = devm_kzalloc(dev, sizeof(*a7cc), GFP_KERNEL);
> + if (!a7cc)
> + return -ENOMEM;
> +
> + init.name = "a7mux";
> + init.parent_data = pdata;
> + init.num_parents = ARRAY_SIZE(pdata);
> + init.ops = &clk_regmap_mux_div_ops;
> +
> + a7cc->clkr.hw.init = &init;
> + a7cc->clkr.regmap = regmap;
> + a7cc->reg_offset = 0x8;
> + a7cc->hid_width = 5;
> + a7cc->hid_shift = 0;
> + a7cc->src_width = 3;
> + a7cc->src_shift = 8;
> + a7cc->parent_map = apcs_mux_clk_parent_map;
> +
> + a7cc->pclk = devm_clk_get(parent, "pll");
> + if (IS_ERR(a7cc->pclk))
> + return dev_err_probe(dev, PTR_ERR(a7cc->pclk),
> + "Failed to get PLL clk\n");
> +
> + a7cc->clk_nb.notifier_call = a7cc_notifier_cb;
> + ret = clk_notifier_register(a7cc->pclk, &a7cc->clk_nb);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "Failed to register clock notifier\n");
> +
> + ret = devm_clk_register_regmap(dev, &a7cc->clkr);
> + if (ret) {
> + dev_err_probe(dev, ret, "Failed to register regmap clock\n");
> + goto err;
> + }
> +
> + ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
> + &a7cc->clkr.hw);
> + if (ret) {
> + dev_err_probe(dev, ret, "Failed to add clock provider\n");
> + goto err;
> + }
> +
> + platform_set_drvdata(pdev, a7cc);
> +
> + cpu_dev = get_cpu_device(0);
> + dev_pm_domain_attach(cpu_dev, true);
> +
> + return 0;
> +
> +err:
> + clk_notifier_unregister(a7cc->pclk, &a7cc->clk_nb);
> + return ret;
> +}
> +
> +static int qcom_apcs_sdx65_clk_remove(struct platform_device *pdev)
> +{
> + struct device *cpu_dev = get_cpu_device(0);
> + struct clk_regmap_mux_div *a7cc = platform_get_drvdata(pdev);
> +
> + clk_notifier_unregister(a7cc->pclk, &a7cc->clk_nb);
> + dev_pm_domain_detach(cpu_dev, true);
> +
> + return 0;
> +}
> +
> +static struct platform_driver qcom_apcs_sdx65_clk_driver = {
> + .probe = qcom_apcs_sdx65_clk_probe,
> + .remove = qcom_apcs_sdx65_clk_remove,
> + .driver = {
> + .name = "qcom-sdx65-acps-clk",
> + },
> +};
> +module_platform_driver(qcom_apcs_sdx65_clk_driver);
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("Qualcomm SDX65 APCS Clock driver");
> --
> 2.7.4
>
Powered by blists - more mailing lists