[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220215152957.581303-13-sashal@kernel.org>
Date: Tue, 15 Feb 2022 10:29:47 -0500
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc: James Smart <jsmart2021@...il.com>,
"Ewan D . Milne" <emilne@...hat.com>,
"Martin K . Petersen" <martin.petersen@...cle.com>,
Sasha Levin <sashal@...nel.org>, james.smart@...adcom.com,
dick.kennedy@...adcom.com, jejb@...ux.ibm.com,
linux-scsi@...r.kernel.org
Subject: [PATCH AUTOSEL 5.10 13/23] scsi: lpfc: Remove NVMe support if kernel has NVME_FC disabled
From: James Smart <jsmart2021@...il.com>
[ Upstream commit c80b27cfd93ba9f5161383f798414609e84729f3 ]
The driver is initiating NVMe PRLIs to determine device NVMe support. This
should not be occurring if CONFIG_NVME_FC support is disabled.
Correct this by changing the default value for FC4 support. Currently it
defaults to FCP and NVMe. With change, when NVME_FC support is not enabled
in the kernel, the default value is just FCP.
Link: https://lore.kernel.org/r/20220207180516.73052-1-jsmart2021@gmail.com
Reviewed-by: Ewan D. Milne <emilne@...hat.com>
Signed-off-by: James Smart <jsmart2021@...il.com>
Signed-off-by: Martin K. Petersen <martin.petersen@...cle.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/scsi/lpfc/lpfc.h | 13 ++++++++++---
drivers/scsi/lpfc/lpfc_attr.c | 4 ++--
2 files changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 0273bf3918ff3..d1894539efc30 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -898,6 +898,16 @@ struct lpfc_hba {
uint32_t cfg_hostmem_hgp;
uint32_t cfg_log_verbose;
uint32_t cfg_enable_fc4_type;
+#define LPFC_ENABLE_FCP 1
+#define LPFC_ENABLE_NVME 2
+#define LPFC_ENABLE_BOTH 3
+#if (IS_ENABLED(CONFIG_NVME_FC))
+#define LPFC_MAX_ENBL_FC4_TYPE LPFC_ENABLE_BOTH
+#define LPFC_DEF_ENBL_FC4_TYPE LPFC_ENABLE_BOTH
+#else
+#define LPFC_MAX_ENBL_FC4_TYPE LPFC_ENABLE_FCP
+#define LPFC_DEF_ENBL_FC4_TYPE LPFC_ENABLE_FCP
+#endif
uint32_t cfg_aer_support;
uint32_t cfg_sriov_nr_virtfn;
uint32_t cfg_request_firmware_upgrade;
@@ -918,9 +928,6 @@ struct lpfc_hba {
uint32_t cfg_ras_fwlog_func;
uint32_t cfg_enable_bbcr; /* Enable BB Credit Recovery */
uint32_t cfg_enable_dpp; /* Enable Direct Packet Push */
-#define LPFC_ENABLE_FCP 1
-#define LPFC_ENABLE_NVME 2
-#define LPFC_ENABLE_BOTH 3
uint32_t cfg_enable_pbde;
struct nvmet_fc_target_port *targetport;
lpfc_vpd_t vpd; /* vital product data */
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 727b7ba4d8f82..b73d5d9494021 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -3797,8 +3797,8 @@ LPFC_ATTR_R(nvmet_mrq_post,
* 3 - register both FCP and NVME
* Supported values are [1,3]. Default value is 3
*/
-LPFC_ATTR_R(enable_fc4_type, LPFC_ENABLE_BOTH,
- LPFC_ENABLE_FCP, LPFC_ENABLE_BOTH,
+LPFC_ATTR_R(enable_fc4_type, LPFC_DEF_ENBL_FC4_TYPE,
+ LPFC_ENABLE_FCP, LPFC_MAX_ENBL_FC4_TYPE,
"Enable FC4 Protocol support - FCP / NVME");
/*
--
2.34.1
Powered by blists - more mailing lists