lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [day] [month] [year] [list]
Message-Id: <20220215165429.53764-1-danilokrummrich@dk-develop.de>
Date:   Tue, 15 Feb 2022 17:54:29 +0100
From:   Danilo Krummrich <danilokrummrich@...develop.de>
To:     dmitry.torokhov@...il.com, linux-input@...r.kernel.org,
        linux-kernel@...r.kernel.org
Cc:     linus.walleij@...aro.org,
        Danilo Krummrich <danilokrummrich@...develop.de>
Subject: [PATCH] input: ps2-gpio: enforce GPIOs flag open drain

The PS/2 bus defines the data and clock line be open drain, therefore
for both enforce the particular GPIO flags in the driver.

Without enforcing to flag at least the clock gpio as open drain we run
into the following warning:

WARNING: CPU: 1 PID: 40 at drivers/gpio/gpiolib.c:3175 gpiochip_enable_irq+0x54/0x90

gpiochip_enable_irq() warns on a GPIO being configured as output while
serving as IRQ source without being flagged as open drain.

Signed-off-by: Danilo Krummrich <danilokrummrich@...develop.de>
---
 drivers/input/serio/ps2-gpio.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/input/serio/ps2-gpio.c b/drivers/input/serio/ps2-gpio.c
index 8970b49ea09a..f562f396ba05 100644
--- a/drivers/input/serio/ps2-gpio.c
+++ b/drivers/input/serio/ps2-gpio.c
@@ -322,14 +322,19 @@ static irqreturn_t ps2_gpio_irq(int irq, void *dev_id)
 static int ps2_gpio_get_props(struct device *dev,
 				 struct ps2_gpio_data *drvdata)
 {
-	drvdata->gpio_data = devm_gpiod_get(dev, "data", GPIOD_IN);
+	enum gpiod_flags gflags;
+
+	/* Enforce open drain, since this is required by the PS/2 bus. */
+	gflags = GPIOD_IN | GPIOD_FLAGS_BIT_OPEN_DRAIN;
+
+	drvdata->gpio_data = devm_gpiod_get(dev, "data", gflags);
 	if (IS_ERR(drvdata->gpio_data)) {
 		dev_err(dev, "failed to request data gpio: %ld",
 			PTR_ERR(drvdata->gpio_data));
 		return PTR_ERR(drvdata->gpio_data);
 	}
 
-	drvdata->gpio_clk = devm_gpiod_get(dev, "clk", GPIOD_IN);
+	drvdata->gpio_clk = devm_gpiod_get(dev, "clk", gflags);
 	if (IS_ERR(drvdata->gpio_clk)) {
 		dev_err(dev, "failed to request clock gpio: %ld",
 			PTR_ERR(drvdata->gpio_clk));
-- 
2.35.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ