Message-ID: <20220215170718.GF31021@hu-pkondeti-hyd.qualcomm.com>
Date:   Tue, 15 Feb 2022 22:37:18 +0530
From:   Pavan Kondeti <quic_pkondeti@...cinc.com>
To:     Pavan Kondeti <quic_pkondeti@...cinc.com>
CC:     Mathias Nyman <mathias.nyman@...ux.intel.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Mathias Nyman <mathias.nyman@...el.com>,
        <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <quic_ugoswami@...cinc.com>, Jung Daehwan <dh10.jung@...sung.com>
Subject: Re: [PATCH v2] xhci: reduce xhci_handshake timeout in xhci_reset

On Tue, Feb 15, 2022 at 04:19:20PM +0530, Pavan Kondeti wrote:
> Hi Mathias,
> 
> On Tue, Feb 15, 2022 at 12:16:12PM +0200, Mathias Nyman wrote:
> > On 14.2.2022 15.53, Pavan Kondeti wrote:
> > > Hi Mathias,
> > > 
> > > On Mon, Feb 14, 2022 at 02:51:54PM +0200, Mathias Nyman wrote:
> > >> On 14.2.2022 14.20, Pavankumar Kondeti wrote:
> > >>> From: Daehwan Jung <dh10.jung@...sung.com>
> > >>>
> > >>> xhci_reset() is called with interrupts disabled. Waiting 10 seconds for
> > >>> controller reset and controller ready operations can be fatal to the
> > >>> system when controller is timed out. Reduce the timeout to 1 second
> > >>> and print a error message when the time out happens.
> > >>>
> > >>> Fixes: 22ceac191211 ("xhci: Increase reset timeout for Renesas 720201 host.")
> > >>
> > >>
> > >> The commit 22ceac191211 ("xhci: Increase reset timeout for Renesas 720201 host.")
> > >> intentionally increased the timeout to 10 seconds as that host might take 9
> > >> seconds to complete reset. This was done almost 10 years ago so I don't know
> > >> if it really is an issue anymore.
> > >>
> > >> Anyways, your patch might break Renesas 72021 instead of fixing it.
> > > 
> > > Unfortunately, yes :-( . We have this reduced timeout patch in our previous
> > > commercialized products so thought this would be a good time to fix this
> > > once for all. Since this patch has been 10 years long, not sure if any other
> > > controllers also need 10 sec timeout. It would probably better
> > > 
> > >>
> > >> I agree that busylooping up to 10 seconds with interrupts disabled doesn't make sense.
> > >>
> > >> Lets see if there is another solution for your case.
> > >>
> > >> - Does a "guard interval" after writing the reset help?
> > >>   For example Intel xHCI needs 1ms before touching xHC after writing the reset bit
> > > 
> > > I will ask this question to our hardware team. Setting that one quirk from
> > > DWC3 host might require other changes like this [1].
> > >>
> > >> - Is it the CNR bit or the RESET bit that fails? could be just stuck CNR bit? 
> > > 
> > > The RESET bit never gets cleared from USBCMD register.
> > > 
> > >>  
> > >> - we only disable local interrupts when xhci_reset() is called from xhci_stop(),
> > >>   and sometimes from xhci_shutdown() and xhci_resume() if some conditions are met.
> > >>   Have you identified which one is the problematic case?
> > > 
> > > The crash reports I have seen are pointing to
> > > 
> > > usb_remove_hcd()->xhci_stop()->xhci_reset()
> > 
> > Ok, so xhci_stop() and xhci_shutdown() both may call xhci_reset() with interrupts
> > disabled and spinlock held. In both these cases we're not that interested in the
> > outcome of xhci_reset().
> > 
> > But during probe we call xhci_reset() with interrupts enabled without spinlock,
> > and here we really care about it succeeding.
> > I'm also guessing reset could take a longer time during probe due to possible recent
> > BIOS handover, or firmware loading etc.
> > 
> > So how about passing a timeout value to xhci_reset()?
> > Give it 10 seconds during probe, and 250ms in the other cases.
> > 
> 
> Thanks for this suggestion.
> 
> This sounds better compared to the quirks approach. xhci_resume() also seems
> to be calling xhci_reset() in the hibernation path, I believe we should treat
> this like probe()/startup case and give larger timeout.
> 
I will test the below patch as per Mathias suggestion.

Thanks,
Pavan

diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index df3522d..031fe90 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -762,7 +762,7 @@ static int xhci_exit_test_mode(struct xhci_hcd *xhci)
 	}
 	pm_runtime_allow(xhci_to_hcd(xhci)->self.controller);
 	xhci->test_mode = 0;
-	return xhci_reset(xhci);
+	return xhci_reset(xhci, false);
 }
 
 void xhci_set_link_state(struct xhci_hcd *xhci, struct xhci_port *port,
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 0e31206..174dccd 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -2583,7 +2583,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 
 fail:
 	xhci_halt(xhci);
-	xhci_reset(xhci);
+	xhci_reset(xhci, false);
 	xhci_mem_cleanup(xhci);
 	return -ENOMEM;
 }
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index f5b1bcc..2137581 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -162,7 +162,7 @@ int xhci_start(struct xhci_hcd *xhci)
  * Transactions will be terminated immediately, and operational registers
  * will be set to their defaults.
  */
-int xhci_reset(struct xhci_hcd *xhci)
+int xhci_reset(struct xhci_hcd *xhci, bool must_succeed)
 {
 	u32 command;
 	u32 state;
@@ -195,8 +195,16 @@ int xhci_reset(struct xhci_hcd *xhci)
 	if (xhci->quirks & XHCI_INTEL_HOST)
 		udelay(1000);
 
+	/*
+	 * xhci_reset() can be called with interrupts disabled, use
+	 * 10 seconds timeout during start/resume only. stop/shutdown
+	 * can get away with lower timeout as controller reset failure
+	 * is not fatal.
+	 */
 	ret = xhci_handshake(&xhci->op_regs->command,
-			CMD_RESET, 0, 10 * 1000 * 1000);
+			CMD_RESET, 0, must_succeed ?
+			10 * 1000 * 1000 :
+			250 * 1000);
 	if (ret)
 		return ret;
 
@@ -210,7 +218,9 @@ int xhci_reset(struct xhci_hcd *xhci)
 	 * than status until the "Controller Not Ready" flag is cleared.
 	 */
 	ret = xhci_handshake(&xhci->op_regs->status,
-			STS_CNR, 0, 10 * 1000 * 1000);
+			STS_CNR, 0, must_succeed ?
+			10 * 1000 * 1000 :
+			250 * 1000);
 
 	xhci->usb2_rhub.bus_state.port_c_suspend = 0;
 	xhci->usb2_rhub.bus_state.suspended_ports = 0;
@@ -731,7 +741,7 @@ static void xhci_stop(struct usb_hcd *hcd)
 	xhci->xhc_state |= XHCI_STATE_HALTED;
 	xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
 	xhci_halt(xhci);
-	xhci_reset(xhci);
+	xhci_reset(xhci, false);
 	spin_unlock_irq(&xhci->lock);
 
 	xhci_cleanup_msix(xhci);
@@ -784,7 +794,7 @@ void xhci_shutdown(struct usb_hcd *hcd)
 	xhci_halt(xhci);
 	/* Workaround for spurious wakeups at shutdown with HSW */
 	if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
-		xhci_reset(xhci);
+		xhci_reset(xhci, false);
 	spin_unlock_irq(&xhci->lock);
 
 	xhci_cleanup_msix(xhci);
@@ -1163,7 +1173,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		xhci_dbg(xhci, "Stop HCD\n");
 		xhci_halt(xhci);
 		xhci_zero_64b_regs(xhci);
-		retval = xhci_reset(xhci);
+		retval = xhci_reset(xhci, true);
 		spin_unlock_irq(&xhci->lock);
 		if (retval)
 			return retval;
@@ -5308,7 +5318,7 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
 
 	xhci_dbg(xhci, "Resetting HCD\n");
 	/* Reset the internal HC memory state and registers. */
-	retval = xhci_reset(xhci);
+	retval = xhci_reset(xhci, true);
 	if (retval)
 		return retval;
 	xhci_dbg(xhci, "Reset complete\n");
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 5a75fe5..331a38f 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -2087,7 +2087,7 @@ int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, int usec);
 void xhci_quiesce(struct xhci_hcd *xhci);
 int xhci_halt(struct xhci_hcd *xhci);
 int xhci_start(struct xhci_hcd *xhci);
-int xhci_reset(struct xhci_hcd *xhci);
+int xhci_reset(struct xhci_hcd *xhci, bool must_succeed);
 int xhci_run(struct usb_hcd *hcd);
 int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks);
 void xhci_shutdown(struct usb_hcd *hcd);

Powered by blists - more mailing lists