[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220215190447.3030710-1-trix@redhat.com>
Date: Tue, 15 Feb 2022 11:04:47 -0800
From: trix@...hat.com
To: davem@...emloft.net, kuba@...nel.org, michal.simek@...inx.com,
radhey.shyam.pandey@...inx.com, gary@...yguo.net,
rdunlap@...radead.org, esben@...nix.com, huangguangbin2@...wei.com,
michael@...le.cc, moyufeng@...wei.com, arnd@...db.de,
chenhao288@...ilicon.com, andrew@...n.ch,
prabhakar.mahadev-lad.rj@...renesas.com, yuehaibing@...wei.com
Cc: netdev@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, Tom Rix <trix@...hat.com>
Subject: [PATCH] net: ethernet: xilinx: cleanup comments
From: Tom Rix <trix@...hat.com>
Remove the second 'the'.
Replacements:
endiannes to endianness
areconnected to are connected
Mamagement to Management
undoccumented to undocumented
Xilink to Xilinx
strucutre to structure
Signed-off-by: Tom Rix <trix@...hat.com>
---
drivers/net/ethernet/xilinx/Kconfig | 2 +-
drivers/net/ethernet/xilinx/ll_temac.h | 4 ++--
drivers/net/ethernet/xilinx/ll_temac_main.c | 2 +-
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 2 +-
drivers/net/ethernet/xilinx/xilinx_emaclite.c | 2 +-
5 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/xilinx/Kconfig b/drivers/net/ethernet/xilinx/Kconfig
index 911b5ef9e680..0014729b8865 100644
--- a/drivers/net/ethernet/xilinx/Kconfig
+++ b/drivers/net/ethernet/xilinx/Kconfig
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0-only
#
-# Xilink device configuration
+# Xilinx device configuration
#
config NET_VENDOR_XILINX
diff --git a/drivers/net/ethernet/xilinx/ll_temac.h b/drivers/net/ethernet/xilinx/ll_temac.h
index 4a73127e10a6..ad8d29f84be6 100644
--- a/drivers/net/ethernet/xilinx/ll_temac.h
+++ b/drivers/net/ethernet/xilinx/ll_temac.h
@@ -271,7 +271,7 @@ This option defaults to enabled (set) */
#define XTE_TIE_OFFSET 0x000003A4 /* Interrupt enable */
-/** MII Mamagement Control register (MGTCR) */
+/** MII Management Control register (MGTCR) */
#define XTE_MGTDR_OFFSET 0x000003B0 /* MII data */
#define XTE_MIIMAI_OFFSET 0x000003B4 /* MII control */
@@ -283,7 +283,7 @@ This option defaults to enabled (set) */
#define STS_CTRL_APP0_ERR (1 << 31)
#define STS_CTRL_APP0_IRQONEND (1 << 30)
-/* undoccumented */
+/* undocumented */
#define STS_CTRL_APP0_STOPONEND (1 << 29)
#define STS_CTRL_APP0_CMPLT (1 << 28)
#define STS_CTRL_APP0_SOP (1 << 27)
diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c
index b900ab5aef2a..7171b5cdec26 100644
--- a/drivers/net/ethernet/xilinx/ll_temac_main.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
@@ -1008,7 +1008,7 @@ static void ll_temac_recv(struct net_device *ndev)
(skb->len > 64)) {
/* Convert from device endianness (be32) to cpu
- * endiannes, and if necessary swap the bytes
+ * endianness, and if necessary swap the bytes
* (back) for proper IP checksum byte order
* (be16).
*/
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index de0a6372ae0e..6eeaab77fbe0 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -537,7 +537,7 @@ static int __axienet_device_reset(struct axienet_local *lp)
* This function is called to reset and initialize the Axi Ethernet core. This
* is typically called during initialization. It does a reset of the Axi DMA
* Rx/Tx channels and initializes the Axi DMA BDs. Since Axi DMA reset lines
- * areconnected to Axi Ethernet reset lines, this in turn resets the Axi
+ * are connected to Axi Ethernet reset lines, this in turn resets the Axi
* Ethernet core. No separate hardware reset is done for the Axi Ethernet
* core.
* Returns 0 on success or a negative error number otherwise.
diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 519599480b15..f65a638b7239 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -498,7 +498,7 @@ static void xemaclite_update_address(struct net_local *drvdata,
* @dev: Pointer to the network device instance
* @address: Void pointer to the sockaddr structure
*
- * This function copies the HW address from the sockaddr strucutre to the
+ * This function copies the HW address from the sockaddr structure to the
* net_device structure and updates the address in HW.
*
* Return: Error if the net device is busy or 0 if the addr is set
--
2.26.3
Powered by blists - more mailing lists