| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 15 Feb 2022 20:11:10 +0100
From: Armin Wolf <W_Armin@....de>
To: pali@...nel.org
Cc: jdelvare@...e.com, linux@...ck-us.net, linux-hwmon@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 4/7] hwmon: (dell-smm) Improve temperature sensors detection
On the Dell Inspiron 3505, three temperature sensors are
available through the SMM interface. However since they
do not have an associated type, they are not detected.
Probe for those sensors in case no type was detected.
_i8k_get_temp() is used instead of i8k_get_temp()
since it is sometimes faster and the result is
easier to check (no -ENODATA) since we do not
care about the actual temp value.
Tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@....de>
---
drivers/hwmon/dell-smm-hwmon.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c
index a102034a1d38..b7016971bb2e 100644
--- a/drivers/hwmon/dell-smm-hwmon.c
+++ b/drivers/hwmon/dell-smm-hwmon.c
@@ -655,6 +655,11 @@ static umode_t dell_smm_is_visible(const void *drvdata, enum hwmon_sensor_types
case hwmon_temp:
switch (attr) {
case hwmon_temp_input:
+ /* _i8k_get_temp() is fine since we do not care about the actual value */
+ if (data->temp_type[channel] >= 0 || _i8k_get_temp(channel) >= 0)
+ return 0444;
+
+ break;
case hwmon_temp_label:
if (data->temp_type[channel] >= 0)
return 0444;
--
2.30.2
Powered by blists - more mailing lists